Boats - Marine Engines

Do you dream of a journey on a romantic steam ship? The Wilesco African Queen is then exactly the right boat for you. The engine is steaming smoothly and the chimney smokes. This model is assembled completely and ready to use. If you want to steer the boat by a RC system everything is prepared for mounting it afterwards.

Do not wait to long to be a captain because the African Queen is a limited edition of 1,000 in the Wilesco range.

The original steamboat African Queen was built 1910. It became worldwide famous as the main role in the film African Queen beside the actors Katharine Hepburn and Humphrey Bogart. In this film the African Queen gets torpedoed on the Lake Victoria by the German warship Konigin Luise in the course of World War I. Like the original boat, this finished model has a wooden hull and runs with a steam engine.

Technical specifications: Length: 70 cm, Width: 20 cm, Total height: 40 cm, Scale: 1:12, Weight: 2 kg, Boiler capacity: 120 cm³

The pictured figurine is not included in the packing.

Complete steamboat African Queen with wooden hull and fully operational steam engine.

Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.

Click on picture for large view.

Retail Price $849.95

On Sale Limited Time Offer!

Related Products:

One Box of Esbit Fuel (4 grams ea. tablet) $6.95 (4 or fewer items)$5.50 (5 to 9 items)$5.25 (10 to 19 items)$5.00 (20 to 35 items)$4.49 (36 or more items)

Shell Valvata J Oil 460 - Steam Cylinder Oil $4.75

Krick U Boat Type VII Grundbaukasten

Description: Submarine type VII b.
The type VII was the most well-known submarine. Over 1000 in different versions were built. This type is characterized by its particularly harmonious form, which resembles more a ship than a modern submarine. This model is a component system with all stampings from high-quality abs plastic.
The trunk of the submarine type VII b consists of a deck of two half shells, the dipping tank, ballast tank for water ballast as well as the outer thin material, so that all slots and openings can be recognized well. The structure of tower is likewise built up from several punched ABS parts. All fittings as well as the two cannons are contained in the foundation engineering box.
The technology: The dipping process of this model is semi-dynamic, i.e. the fact that a pump and a flood tank are contained in the dipping set, which only work supporting for dynamic (by speed supported) dipping.
Additional: 20311 drive and dipping set for component system sold separately.
Technical data: Scale: 1:60 Length: 1120 mm Width: 125 mm Height: 170 mm

Krick-20311 accessory set not included.

Click on picture for large view of kit.

Krick U Boat Type VII Grundbaukasten Accessory Kit.

Description: Submarine type VII b.Krick U Boat Type VII Accessory Kit Antriebs- und Tauchset

Click on picture for large view of kit.

Krick Anna is a small open launch, the ideal for introduction to steam sailing.
The hull is vacuum formed ABS, all timber work is CNC cut making this a very easy model to construct, the figure and fenders are additional accessories. Scale 1:10 Details: Length: 24 in. (610 mm); Beam: 10 1/4 in. (260 mm); Height to Deck: 4in. (101.6 mm)

The engine and boiler (NOT INCLUDED) are fully visible on the top deck.

The hull is constructed of ABS and all plywood parts are laser-cut.

Krick Victoria accessory set not included.

The Wilesco D49 marine engine will work with this model.

Click on picture for large view of kit.

Click on This Text for Assembly and Operating Instructions

Krick Victoria Steam Boat Kit
At the turn of the century the steam boat became popular. It was fashionable to own a steam boat, either as a private yacht, working boat or for passenger transportation. The model Victoria (circa 1905) has been created for the steam engine enthusiast. The engine and boiler (NOT INCLUDED) are fully visible on the top deck.

The hull is constructed of ABS and all plywood parts are laser-cut. Assembled time for this launch is approximately 150-200 hours.
Technical Data: Scale: 1:10, Length: 46 1/3 in. (1177 mm), Beam: 10 1/3 in. (253 mm)
Krick recommends: steam plant Victor with vertical boiler and gastank plus filling valve (not included).
Krick Victoria accessory set not included.

Click on picture for large view of kit.

Click on This Text for Assembly and Operating Instructions

Krick Victoria Accessory Set

Click on picture for large view of kit.

Krick Alexandra Steam Boat Kit

With the Alexandra we have managed to create a typical steam launch from the beginning of this century (circa 1900). The slim hull shape reminds us of this time period, which brought us so many elegant boats. The kit is of outstanding quality. All plywood parts have been laser-cut. The hull is from ABS 1.5mm strong. Propeller and shaft are included with the kit.

Technical Data Length: 37" (940mm) Height including chimney: 11" (280mm) Beam: 7 1/2" (190mm) Scale: 1:10

Krick Alexandra accessory set not included.

Steam Plant NOT INCLUDED in the kit. The Wilesco D49 will work with this kit. (Burner Kit BIX026 will work wtih the D49).

Click on picture for large view of kit.

Click on This Text for Operating Instructions

Alexandra Accessory Set

Click on picture for large view of kit.

Krick Borkum Kit

The Borkum is a typical North Sea island supply vessel from around the turn of the century. This model is ideal for customising to your own taste using special accessories like freight, tools or passengers.
The Borkum s very easy to build, the hull is made from vacuum formed ABS and is fully CNC cut at the deck. All wooden parts are laser cut for accuracy. Screw shaft and pipe as well as brass prop and the rudder linkage are included in the kit. Scale: 1:10 Details: Length: 35 1/2 in.(940mm), Beam: 13 in.(330mm)
Recommended Steam Engine: MSM Clyde Steam Plant (see below) or Wilesco D49 (low end) (Steam Plant not included).
Krick Borkum accessory set not included.

Steam Plant NOT INCLUDED in the kit.



Click on picture for large view.

Click on This Text for Magazine Article on Borkum and Clyde Steam Plant.

Click on This Text for Assembly and Operating Instructions

Borkum Accessory Set

Click on picture for large view of kit.

Supplied:
Mounting Tray P/N 2786
3 in. Vertical Boiler P/N 4059
3 in. Burner Kit P/N 4016
Clyde Twin Cylinder Engine P/N 5045
1-1/2 in. Vertical Refillable Gas Tank P/N 4272
1-1/4 in. Exhaust Oil Separator P/N 4062
Refillable Gas Tank Adaptor- Long (95 mm) P/N 4357
Screws/Bolts for Securing Components to Mounting Tray
Connecting piping for all components.
Wood lagging, brass binding strips and instructions fro lagging the boiler.

Not supplied:
Mounting Screws for fixing tray into the boat
Engine output shaft connections.

Click on This Text for Magazine Article on Borkum and Clyde Steam Plant.

Click On This Text For Operating Instruction For This Steam Engine

5027K
Avon - a twin cylinder 8 x 11mm bore/stroke oscillating engine.

Designed using a 3D CAD design system and machined using the latest CNC lathe and machining centre technology, provides the basis for this unique engine to perform well above any engine with comparable dimensions. Suitable for powering boats up to 750 mm (30 in.) length and 150 mm (6 in.) beam and requiring steam power for authenticity.

Dimensions:
Weight - 450 g (16 oz)
Total length 90 mm (3.54 in.) including output shaft
Length not including output shaft 80 mm (3.15 in.)
Height 85 mm (3.35 in.)
Width including displacement lubricator 65 mm (2.56 in.)
Available as fully assembled engine or self assembly kit as shown
Matched to "Miniature Steam" 2" Boilers.

Click On This Text For Operating Instruction For This Steam Engine

Clyde - a twin cylinder 11 x 11 mm bore/stroke, very powerful twin cylinder oscillating engine that will operate comfortably with steam pressures up to 60 psi. Suitable to power boats up to 1.1 meters long. (Caldercraft Imara, Marie Felling & Resolve)

Dimensions:
Weight - 390 gms.
Length - 90 mm
Height - 85 mm
Width including displacement lubricator - 80 mm.
Available as fully assembled engine or self assembly kit as shown.
Matched to a "Miniature Steam" 3 in. Boilers

Click on This Text for Magazine Article on Borkum and Clyde Steam Plant.

Click On This Text For Operating Instruction For This Steam Engine

Tyne - a single cylinder 11 x 11 mm bore/stroke oscillating steam engine - primarily developed as an engine suitable for the education of engineering students in the basics of steam powered devices. It is a subset of the Clyde engine.

Ideal for entry level into steam driven model boats up to 750 mm length where the reversing function is not required.
Dimensions:
Weight 270 g
Length 70 mm
Height 70 mm
Width including displacement lubricator 80 mm
Available as self assembled kit only.
Matched to "Miniature Steam" 2 in. Boilers

Click On This Text For Operating Instruction For This Steam Engine

Supplied:
Mounting Tray P/N 2840
2 in. Horizontal Boiler complete P/N 4058
Avon Twin Cylinder Oscillator Engine P/N 5028
Small Vertical Refillable Gas Tank P/N 4271
Small Exhaust Oil Separator P/N 4064
Refillable Gas Tank Adaptor- Long (95 mm) P/N 4357
Screws/Bolts for Securing Components to Mounting Tray
Connecting piping for all components.

Not supplied:
Mounting Screws for fixing tray in hull
Engine output shaft connections

Dimensions:
Mounting Tray 90 x 250 mm
Height to top of flue 140 mm
Maximum width 100 mm
Height to top of pressure gauge 95 mm
Overall length 280 mm
Engine height 80 mm
Weight 1620 gm
Output shaft diameter 5 mm

Click On This Text For Operating Instruction For This Steam Engine

Supplied:
Mounting Tray P/N 2838
2 in. Verticale Boiler complete P/N 4057
Avon Twin Cylinder Oscillator Engine P/N 5028
1-1/4" Vertical Refillable Gas Tank P/N 4271
1-1/4" Exhaust Oil Separator P/N 4062
Refillable Gas Tank Adaptor- Long (95 mm) P/N 4357
Screws/Bolts for Securing Components to Mounting Tray
Connecting piping for all components.
Not supplied:
Mounting Screws for fixing tray in hull
Engine output shaft connections

Dimensions:
Mounting Tray 90 x 250 mm
Height to top of flue 140 mm
Maximum width 100 mm
Height to top of pressure gauge 95 mm
Overall length 280 mm
Engine height 80 mm
Weight 1620 gm
Output shaft diameter 5 mm

Click On This Text For Operating Instruction For This Steam Engine

Supplied:
Mounting Tray P/N 2786
3 in. Horizontal Boiler P/N 4059
3 in. Burner Kit P/N 4016
Clyde Twin Cylinder Oscillating Engine P/N 5045
1-1/2 in. Vertical Refillable Gas Tank P/N 4272
1-1/4 in. Exhaust Oil Separator P/N 4062
Refillable Gas Tank Adaptor- Long (95 mm) P/N 4357
Screws/Bolts for Securing Components to Mounting Tray
Connecting piping for all components.
Wood lagging, brass binding strips and instructions for lagging the boiler.
Not supplied:
Mounting Screws for fixing tray into the boat
Engine output shaft connections

Dimensions:
Mounting tray 200 x 90 mm (7.87 in. x 3.54 in.)
Overall length 255 mm (10 in.)
Overall Width 100 mm (3.95 in.)
Height to top of pressure gauge 150 mm (6 in.)
Height to top of stack 240 mm (9.5 in.)
Height to top of engine 85 mm ( 3.35 in.)
Output shaft diameter 5 mm (0.2 in.)
Weight 1960 gm

Click On This Text For Operating Instruction For This Steam Engine

4" Horizontal Boiler/Mildura RC Reversing Plant

The Mildura is the most popular in our range with most modellers opting for the Stephenson's Reversing Linkage. The crank throws are at 90º giving the engine will self starting characteristics at any position of the crankshaft. By adding Stephenson's reversing linkage the Mildura becomes a marine steam engine capable of powering model steamboats up to five feet on a boiler pressure of about up to 80 psi. This engine is suitable for use in model boats up to 7 feet in length. Or polish it up for an absolutely stunning model.

Engine Specs:
Width 5-3/4"
Height 5-1/4"
Bore 3/4"
Stroke 3/4"
Flywheel diameter 3-1/8"
Weight 2080 gms (when finished)

Click On This Text For Operating Instruction For This Steam Engine

Wilesco D 49 vertical mirror polished brass boiler, diameter 65 mm, height 100 mm, capacity 300 cubic cm, with water gauge glass, spring loaded safety valve, steam whistle with chain. 2 double action brass cylinders with steam jet oilers in a V-shape, self starting automatic drive (allowing forward and reverse), infinitely variable. RC-connection can be joined to the reversing lever. Suitable for model boats of 80 cm long (31.496 inches) Operating time approx. 15 minutes. Measurements:
Base plate for boiler 120 x 105 mm, height (incl. funnel)
240 mm, weight (incl. aggregate) approx. 0,9 kg

Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.

Retail Price $489.95

On Sale Limited Time Offer!

Related Products:

One Box of Esbit Fuel (4 grams ea. tablet) $6.95 (4 or fewer items)$5.50 (5 to 9 items)$5.25 (10 to 19 items)$5.00 (20 to 35 items)$4.49 (36 or more items)

Shell Valvata J Oil 460 - Steam Cylinder Oil $4.75

Borkum by Krick with Stuart Puffin Steam Plant
Miniature Working Steam Engine Plant
Fast Launch 37" Beam 13"
Steam Power by Stuart Puffin with ceramic burners.
Boat only operated once see video maden launch
R/C controlled HiTech 2 CH 2.4 GH dy battery
Encludes ram steam sound
Oil separator
Refill propane tank
Built to high standards - Run time 25 min
Instruction Booklets, Operating Instructions and Building Instructions
Wooden stand

ON SALE REGULAR $4,995

Click on picture for large view.

Slightly Used - Sail Boat Schooner by Victor

Miniature Working Ruby B Sail Boat Schooner by Victor

Ruby B Sail Boat Schooner by Victor
R/C Controlled 3 Ch Tech FM, Radio
Auxiliary Motor Power Fwd/Rev
Excellent Sailing Craft
Includes ESC/BEC for R/C plus 7.2 Battery for Auxiliary Motor Power
Fwd/Rev High end HiTech FM Winch, Servo and 7.2vNIMH Battery
Sail Winch and auxiliary motor power Fwd/Rev.
Includes Deck Hands, two life boats
Has main sail/ two jibs
Automatic Bilge Pump with Light on Deck
Includes wood stand
CANNOT BE SHIPPED Must be picked up at Toms River NJ

Click on picture for large view.

Slightly Used - Billings Tug Zeeland 32"
R/C HiTech 3CH Ranger FM
Power Graupner 700 BB 12 Volt Motor
ESC Astro 208 With BEC
Boat includes:
18 lights, smoke, diesel sound, brass prop, 2 6 volt gell cell.
Run time over 60 minutes. Lots of detail!
Click on picture for large view.

Dumas 28" long 9" beam
All wood - hand planked
Power Outboard Graupner 7.2 Volt Motor - water cooled with BEC
R/C Futaba 2 CH AM
Power 7.2 Volt 3000 MA NI MH
ESC - Astro Flight
Boat includes:
10 lights, horn, gas sound (ram electronics), soft spot light.
Run time 45-50 minutes.
Great boar for beginner - good handling
Click on picture for large view.

1939 Century Hydro by Dumas(702) 31" long 9" beam
All wood - hand double planked
Power Macks 12 Volt Motor - water cooled
R/C Futaba T2PH 2 CH AM
Power 7.2 Volt 3000 MA NI MH
ESC - Robbe #120 water cooled
Run time 15-18 minutes.
Very Fast!
Click on picture for large view.

1930 Chris Carft Run-About 2 Cockpits by Dumas 36" long 8.5" beam
All wood - hand double planked
Power Macks Murado 12 Volt Motor - water cooled
R/C HiTech Ranger AM
Power 2 - 7.2 Volt NI MH
ESC - Astro FL208 with Fan (BEC)
Dash Lights, Running Lights
Prop - Octura Brass
Run time 12-15 minutes.

Click on picture for large view.

1941 Chris Carft Hydro Dumas (1254) 24" long with step bottom
All Wood - hand planked
Power Dumas 2025 6 Volt Motor
R/C HiTech Ranger 2 CH AM
Power 1 - 7.2 Volt NI MH
ESC - Robbie with BEC
Run time 20 minutes.

Click on picture for large view.

Billings Slo-Mo-Shun IV 28" long
All wood - hand planked
Power Dumas 2025 6 Volt Motor - water cooled
R/C Futaba 2 CH AM
Power 1 - 7.2 Volt NI MH
Run time over 15 minutes.

Click on picture for large view.

Atlas Van Lines (Dumas) Hydroplane with Tune Pipe
Length 36", Beam 13"
All Plywood and Epoxy Spray Painted, Built on Jigs to very high standards.
All stainless steel outdrive, Sponson turn fin stainless steel.
3 bladed prop Berylium Copper prop - Balanced
Engine 7.5 K & B Nitro with tuned pipe -Engine is water cooled
8 oz Fuel Tank with filter, 3/16 Flex shaft, 2 CH Cirrus RX only and two servos.
Watertight compartment, Fuel 10% nitro or higher required
Boat was run 6 times @ 45 to 50 mph, Good Handling, Run time 35-40 minutes
The Above includes Sullivan 12v power starter and extra glow plugs, control power panel and fuel pump included along with glow plug connector and many accessories
12V Battery for control panel and starter
Motor and Boat in excellent condition

Click on picture for large view.

Hand Made by Master Craftsman Ron Laib - H.M.S Guernsey

Length 32 inches, Beam 6 inches
12V 2.2 amp Gel Cell, Charger for Battery, Fiberglass Hull, Run Time 45 Minutes

Click on picture for large view.

Bore 1/2" Stroke 3/4" (X2) Twin Cylinder Double Acting

This unique engine has forward, reverse and speed control capabilities, using a single lever which can be servo operated for radio control. Think of it. Just one servo does all of this! Stop! Go Forward! Go Aft! And control the speed in both directions!

This engine features a cast bronze base and frames, plus oilite bronze sleeve bearings on the crank shaft and piston rod. The crank pin bearings are machined from solid bronze which run on a ground pin. It also has a precision ground stainless steel piston rod with "O" ring seals. The light weight aluminum cylinders are hard anodized to give you long wear.

Approximate dimensions are 2-1/2" high, 4-1/2" wide and 3-1/8" long parallel to the shaft. The crankshaft is 3/16" diameter precision ground stainless steel. The steam inlet and outlet are both threaded 3/16-40

NOTE: Assembly Required.

Click on picture for large view of kit.

This small but mighty steam engine, developed by Lutz Hielscher, is ideally suited for installation in steam ships and boats up to 70 cm in length driven by propellor or paddle wheel, or for installation in steam cars, steam locomotives, or as a stationary mini steam engine for impulsion of a variety of factory models. Propellor up to 40 mm.

Category:

Steam Engines / Mini Steam


Technical Data:

Ready to run
Width: 3,7 cm
Height: 5.0 cm
Piston: 7 mm
Stroke: 7 mm
Steering effective from both sides
2 cylinder oscillating
Also controllable via servo: forwards-backwards-fast-slow-stop
May be installed either upright or horizontally
Weight: 40 g
Drive shaft exit to right, left or both side


Performance Details:


bar | RPM on engine | RPM on 1st Shaft 1:3.3 / optional 2nd Shaft 1:11
0,5 1700 515 / 155
1,0 2400 727 / 218
1,5 2880 872 / 261
2,0 3100 939 / 281

Torque at transmission output 1 bar: 17.75 N/cm (shaft cannot be stopped by hand).
Performance at 1 bar: 4.30 Watt


Category:

Steam Engines / Mini Steam


Technical Data:

Ready to run
Width: 3,7 cm
Height: 5.0 cm
Piston: 7 mm
Stroke: 7 mm
Steering effective from both sides
2 cylinder oscillating
Also controllable via servo: forwards-backwards-fast-slow-stop
May be installed either upright or horizontally
Weight: 40 g
Drive shaft exit to right, left or both side

The Mini Paddles that we have developed are suitable for the "Andreas" mini steam engine. The paddles can be installed to provide side gear drive or rear drive. A small model ship's steam engines will work especially well with these.

Technical Data:

Diameter: 46 mm
Width: 16 mm
Axle diameter: 2.5 mm
Material: stainless

Related Products:

ANDREAS ready to run $328.95

Our mini boilers are soldered using brass and copper, and insulated with mahogany wood strips.
Comes with a gas burner and refillable lighter-gas tank for producing steam.

Technical Data:

Horizontal
Height without chimney: 3.8 cm
Length: 7.0 cm
Diameter: 2.6 cm
Boiler volume: 30 ccm
Running time: 20 min
Weight: 116 g

Related Products:

Hielscher condenser $65.95

ANDREAS ready to run $328.95

Technical Data:

Ready to run
Length: 4.3 cm
Width: 2.5 cm
Height: 5.4 cm
Volume: 17 ccm
Weight: 22 g

Related Products:

ANDREAS ready to run $328.95

Our mini boilers are soldered using brass and copper, and insulated with mahogany wood strips.
Comes with a gas burner and refillable lighter-gas tank for producing steam.

Technical Data:

Upright
Height without chimney: 5.0 cm
Diameter: 3.5 cm
Boiler volume: 30 ccm
Running time: 20 min
Weight: 110 g

Related Products:

ANDREAS ready to run $328.95

Hielscher condenser $65.95

Hartman Bunker Boat hulls 61" by 11 3/16".

Fiberglass with predrilled shaft log.

Click on picture for large view.

Collectible Limited Edition Tin Toy Model Boat. It is powered by a Wilesco working steam engine. Very rare only 100 units will be produced. This model comes with a certificate of authenticity and serial number. Installed in the bottom is a nickel plated brass boiler double acting Wilesco steam engine. The Flying Machine measures 25" long. Don't miss this once in a life time opportunity.

Only ONE Left in the world. This one has been hand signed by Mr. Tucher. This item has been the store icon for years. I do not want to sell it but people keep asking so I have set a price and the Price is NOT NEGOTIABLE.

Click on picture for large view.

Collectible Limited Edition Tin Toy Model Boat. It is powered by a Wilesco working steam engine. Very rare only 100 units will be produced. This model comes with a certificate of authenticity and serial number. Installed in the bottom is a nickel plated brass boiler double acting Wilesco steam engine. The Flying Machine measures 25" long. Don't miss this once in a life time opportunity.

In stock. Of the 100 scheduled to be produced less than 35 were produced!

Only One Left!

Click on picture for large view.

Collectible Limited Edition General Tin Toy Model Boat w/Wilesco working steam engine. Very rare only 100. This model comes with a certificate of authenticity and serial number. Installed in bottom is a double acting Wilesco steam engine equipped with nickel plated brass boiler, water gauge, and safety valve. Includes metal stand for display. Don't miss this once in a life time opportunity.

In stock- Last in the World! Of the 100 scheduled to be produced less than 15 were produced!

Click on picture for large view.

Collectible Limited Edition Tin Toy Model Boat w/Wilesco working steam engine. Very rare only 500 units produced. This model comes with a certificate of authenticity and serial number. Installed in bottom is a double acting Wilesco steam engine equipped with nickel plated brass boiler, water gauge, safety valve, and working steam whistle. Measures 24" long and includes metal stand for display. Don't miss this once in a life time opportunity.

Click on picture for large view.

Retail Price $525.95

On Sale Limited Time Offer!

Collectible Limited Edition Tin Toy Model Boat w/Wilesco working steam engine. Very rare only 250 units produced. This model comes with a certificate of authenticity and serial number. Installed in the bottom is a nickel plated brass boiler double acting Wilesco steam engine. Measures 34.5" long and includes metal stand for display.

Click on picture for large view.

Collectible Limited Edition Tin Toy Model Boat. Very rare only 200 units produced. This model comes with a certificate of authenticity and serial number. Measures 26.38" (67cm) in length. Big cruiser, with handmade bulkwark-pillars and painted tin figures. Floatable after installing ballast (not included), movement by electric motor. Last one available. The only one we know of that was hand signed by Mr. Tucher.

Click on picture for large view.

Retail Price $1,925.95

On Sale Limited Time Offer!

Wilesco D 48 mirror polished and nickel plated boiler, diameter 55 mm, length 140 mm, boiler capacity 250 cubic cm, with water gauge glass, spring loaded safety valve, filler cap. Boiler heated with butane gas. Removable nickel plated gas holder with filler and regulating valve, suitable for all conventional filling devices. Gas consumption about 20 g, flywheel with a diameter of 50 mm, fully reversible (allowing forward and reverse), self starting automatic drive. Installation of an universal coupling with a diameter of 4 mm is possible on either side of the drive shaft. Fully reversible steam regulator , infinitely variable, RC-connection can be joined to the reversing lever. Weight (complete) 1,0 kg (1,3 kg with filled boiler). Size of base plate boiler and gas holder: Length 180 mm, width 110 mm, height 140 mm, weight 0,6 kg. Aggregate: Length 125 mm, width 90 mm, height 100 mm, weight 0,4 kg.Suitable for boats of a length up to 100 cm (39.37 inches).

Retail Price $679.95

On Sale Limited Time Offer!

Related Products:

Shell Valvata J Oil 460 - Steam Cylinder Oil $4.75

Wilesco D 52 mirror polished and nickelplated boiler, diameter 45 mm, length 105 mm, boiler capacity 155 cm³, with water gauge glass, spring loaded safety valve, steam jet oiler. Vertically mounted reversible double action brass cylinder, with flywheel, flexible plastic pipe to connect boiler and engine assembly. Flywheel with a diameter of 70 mm with grooved pulley, stern tube with a diameter of 6 mm and shaft (length 260 mm), plastic propeller, diameter 50 mm. Brass universal coupling. Operating time about 15 minutes per fuel charge. Suitable for boats up to 40-50 cm (15 - 19 1/2 inches approx).

Weight : 0,9 kg

Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.

Retail Price $259.95

On Sale Limited Time Offer!

Related Products:

One Box of Esbit Fuel (4 grams ea. tablet) $6.95 (4 or fewer items)$5.50 (5 to 9 items)$5.25 (10 to 19 items)$5.00 (20 to 35 items)$4.49 (36 or more items)

Shell Valvata J Oil 460 - Steam Cylinder Oil $4.75