The Great Toy Steam Company
[ Home ]  [ Up ]  [ Catalog ]  [ Terms & Conds ]  [ Search ]  [ View Basket ]  [ Checkout ]  [ Contact Us ]  [ Login ] 
View Basket
Checkout
Search
Terms & Conds
Contact Us


We Ship World Wide - Choose an Alternate Currency
Online Catalog    Stuart Models    Carried In Stock Items
Dynamo 12 Volts Dynamo 12 Volts Ref: PMDYN-COMP

You can belt this PM Research dynamo to any of our steam engines and produce power for your miniature factories or light your small villages. This is reminiscent of a vintage open frame dynamo used for lighting in early factories.

This Dynamo comes completed sporting cast iron construction. The frame has mounting ears and two aluminum end caps to contain the magnet, armature and brushes. You can paint this to suit your requirements.

SPECIFICATIONS:

Speed: 5300 rpm

Voltage: 10 VDC @ 10 watts

Voltage no load: 12 VDC

Max. Current: 2.4 Amps

Dimensions: 2-3/8"W x 3-1/2"L x 2-1/4"H

Click on picture for large view. 



Price:   $116.95


Quantity:


Stuart 10V 3/4 inch bore X 3/4 inch stroke Machined Ready to Assemble Kit. Stuart 10V 3/4 inch bore X 3/4 inch stroke Machined Ready to Assemble Kit. Ref: ST34-50-71185
The Stuart 10V is the most popular engine in our range. The attractive design, and the easy assemble make it an ideal project for the novice.

Height 6 Inches.

Flywheel Dia. 3 Inches Diameter.
Bore 3/4 Inch.
Stroke 3/4 Inch.

Cast Iron - Boxbed, soleplate, standard, cylinder, valve chest and cover, top and bottom cylinder covers, flywheel.

Brass - Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings.

Steel - Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston and valve rods.

Sundries - Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack.

As with all Stuart Models machined kits it is supplied complete with a hand numbered certificate of authentication.

Click on picture for large view. 



Price:   $656.91


Quantity:


Stuart S50 5/8 inch bore X 1 1/4 inch Stoke Stuart S50 5/8 inch bore X 1 1/4 inch Stoke Ref: ST34-50-71316
The Stuart S50 is an elegant model 'Mill Engine' of the type used to power small factories in the north of England during the mid-nineteenth century.

As with all Stuart Models Machined Kits it is supplied ready to run complete with a hand numbered certificate of authentication.

Length 8 1/2 inches.
Flywheel Diameter 3 inches.
Bore 5/8 inch.
Stroke 1 1/4 inches.

Cast Iron - Soleplate, cylinder, valve chest and cover, front and rear cylinder covers, flywheel.

Brass - Slide valve, piston, eccentric strap, valve operating block, glands, crosshead.

Steel - Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston and valve rods.

Sundries - Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack.

Click on picture for large view. 



Price:   $677.53


Pre Order Only at this Time


Stuart Beam Machined Ready to Assemble Kit. Stuart Beam Machined Ready to Assemble Kit. Ref: ST34-50-71391
The Stuart Beam is a relatively simple engine to construct. The use of Watts parallel motion makes this engine fascinating to watch, particularly at slow speeds.

As with all Stuart Models machined Kits it is supplied complete with a hand numbered certificate of authentication.

Length 13 Inches.
Flywheel Diameter 7 Inches.
Bore 1 Inch Diameter
Stroke 2 Inches

Cast Iron - Bedplate, column, beam, pedestal, pulley, crank, cylinder, valve chest and cover, top and bottom cylinder covers, piston, flywheel.

Brass - Slide valve, eccentric strap, valve opperating block, glands, conrod bush, crankshaft bearings, beam bearings, entablature bearings, valve gear bearings.

Steel - Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, beam shaft, entablatures,piston and valve rods, valve gear and parallel motion.

Sundries - Detailed drawings, gaskets, viton "O" ring, gland packing, fixing pack.

Back Order Only on this Item. Please call our toll free number 1-888-549-TOYS(8697) with your billing and shipping information. We will not charge your card untill the item is shipped.

Click on picture for large view. 



Price:   $1,798.26


Pre Order Only at this Time


Stuart Twin Victoria 1 inch bore X 2 inch stroke Machined ready to assemble kit. Stuart Twin Victoria 1 inch bore X 2 inch stroke Machined ready to assemble kit. Ref: ST34-50-71426
The Twin Victoria is essentially two Stuart Victorias running side by side. This makes for a very impressive model which will be the center piece of any collection.

As with all Stuart Models machined Kits it is supplied complete with a hand numbered certificate of authentication.

Length 15 1/2 Inches.
Flywheel 7 Inch Diameter.
Bore 1 Inch.
Stroke 2 Inches.

Cast Iron - Baseplates, cranks, cylinders, valve chests and covers, front and rear cylinder covers, pistons, flywheel.

Brass - Slide valves, eccentric straps, valve operating blocks, glands, conrod bushes, crossheads, crankshaft bearings.

Steel - Crankshaft, connecting rods, eccentric sheaves, eccentric rods, clevises, crankpins, piston and valve rods, all materials for valve gear and crosshead guides.

Sundries - Detailed drawings, gaskets, viton O rings, gland packing, fixings pack.

Back Order Only on this Item. Please call our toll free number 1-888-549-TOYS(8697) with your billing and shipping information. We will not charge your card untill the item is shipped.

Click on picture for large view. 



Price:   $2,920.28


Quantity:


Paint Set Paint Set Ref: ST32-50-72388
Stuart Pain Set both Green and Black Paint 



Price:   $15.39


Quantity:


Small steam and exhaust pipe set. Ref: ST34-50-71193
Small steam and exhaust pipe set. 



Price:   $29.56


Quantity:


Medium steam and exhaust pipe set. Ref: ST34-50-71194
Medium steam and exhaust pipe set. 



Price:   $29.56


Pre Order Only at this Time


Stuart Finished cylinder pipe work. Ref: ST34-50-71428
Stuart Finished cylinder pipe work. 



Price:   $45.02


Quantity:


Oil Cups Oil Cups Ref: ST34-50-71831
Oil Cups 



Price:   $5.09


Pre Order Only at this Time


Drain Cocks Drain Cocks Ref: ST34-50-71960
Drain Cocks 



Price:   $20.54


Quantity:



Back to Top