Hit and Miss Engines Completed and Ready to Run

Galloway - 1/3 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/3 Scale Model Hit and Miss Engine Fully Finished

Ready to run model

Galloway Model Specifications:
Flywheels - 10.200 inch
Bore Diameter - 1.750 inch
Stroke - 3.375 inch

Shipping weight 68 lbs.



Click on picture for large view.

Galloway - 1/4 Scale of 5 HP Hit and Miss Engine Machined Kit.

Engine comes as pictured. Machined, assembled paintednand test run with wooden stand .

PLEASE ALLOW 2 MONTHS FOR DELIVER. This engine is hand machined by a master machinist and requires two months to produce.

Kit Contains all Machined Parts:

Cast Iron Castings (8)
2 flywheels, base, bearing caps, cylinder, cylinder sleeve, head and sub-base

Bronze Castings (9)
Connecting rod bearing, carburetor, igniter, push rod brackets, governor bracket, rocker arm bracket, muffler top and muffler bottom.

Aluminum Castings (2)
Water hopper and Piston

Set of Gears (Bored to size)
Detailed Blueprints (5) 17" x 22", (3) 1 ½" x 14", (1) 8 ½" x 11"

¼ Scale Galloway Specifications:
Flywheels - 7.625 inch
Bore - 1.312 inch
Stroke - 2.530 inch

Shipping Weight 37 lbs



Click on picture for large view.


Galloway 1/4 Scale 3D PDF Picture

Galloway - 1/4 Scale of 5 HP Hit and Miss Engine Ready to Run

Engine comes as pictured. Machined, assembled, painted and test run with wooden stand . It is a used engine but is in very good condition and runs well. Great price!

This was made from:

Cast Iron Castings (8)
2 flywheels, base, bearing caps, cylinder, cylinder sleeve, head and sub-base

Bronze Castings (9)
Connecting rod bearing, carburetor, igniter, push rod brackets, governor bracket, rocker arm bracket, muffler top and muffler bottom.

Aluminum Castings (2)
Water hopper and Piston

Set of Gears (Bored to size)

¼ Scale Galloway Specifications:
Flywheels - 7.625 inch
Bore - 1.312 inch
Stroke - 2.530 inch

Video is NOT of this engine. This video is to show a 1/4 scale working.



Click on picture for large view.


Galloway 1/4 Scale 3D PDF Picture

Water Cooled Red Wing Motor 1/4 Scale. This is a factory machined and completed engine.

The 5 HP Red Wing Engine was the inspiration for this quarter scale version. This model is fully functional and has a 2 inch stroke, a 1.25 inch bore and has 8 inch flywheels. It runs on camping fuel and uses a buzz coil as an ignition source.

This bronze and iron engine is completely machined, painted, assembled, tested and ready to run.

The engine is all hand machined! (The drain cock shown is optional - drain cock part DC-3 see below).

Click on picture for large view.


Instructions How to Use

Related Products:

Drain Cock 3/16 - 40 $26.50

Detailed Machining Directions for The Red Wing Hit & Miss Engine $19.95

Air Cooled Red Wing Motor 1/3 Scale - Engine Ready to Run

Bore 1-1/2", Stroke 2", Gasoline Engine

The 2.5 HP air cooled Red Wing Engine was the inspiration for this fully functional one third scale model. It runs on regular gasoline and uses a buzz coil as an ignition source.

Click on picture for large view.

Water Cooled Hit and Miss Engine

Miniature Hit and Miss Working Engine

Enjoy this hand machined hit and miss engine. Simply attach a 7.5 volt battery and add gas and watch in amazement as the engine puts away on your Desktop! A true marvel and work of art. This engine took over 150 hours of machining to produce. These engines have only been test run. Available in green or red.

Engine
Length: 8 inches
Height:: 5 1/2 inches
Flywheel: 4 7/8 inches
Material: Brass and Cast Iron

Base
Length: 12 inches
Wide: 7 1/4 inches
Total height engine and base: 9 1/8 inches

This bronze and iron engine is completely machined, painted, assembled, tested and ready to run.

The engine is all hand machined!

Click on picture for large view.

Water Cooled Hit and Miss Engine

Miniature Hit and Miss Working Engine

Enjoy this hand machined hit and miss engine. Simply attach a 7.5 volt battery and add gas and watch in amazement as the engine puts away on your Desktop! A true marvel and work of art. This engine took over 150 hours of machining to produce. These engines have only been test run. Available in green or red.

Engine
Length: 8 inches
Height:: 5 1/2 inches
Flywheel: 4 7/8 inches
Material: Brass and Cast Iron

Base
Length: 12 inches
Wide: 7 1/4 inches
Total height engine and base: 9 1/8 inches

This bronze and iron engine is completely machined, painted, assembled, tested and ready to run.

The engine is all hand machined!

Click on picture for large view.

Galloway - 1/6 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/6 Scale Model Hit and Miss Engine Casting Kit

NOTE: WE HAVE RE-DRAWN THE PLANS TO THIS ENGINE IN AUTO CADE. WE HAVE CORRECTED ALL MISTAKES THAT WERE PREVIOUSLY FOUND IN THE ORIGINAL SHELLY DRAWINGS.

Click on picture for large view.

Galloway - 1/8 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/8 Scale Model Hit and Miss Engine Ready to Run.

PLEASE ALLOW 2 MONTHS FOR DELIVER. This engine is hand machined by a master machinist and requires two months to produce.

Click on picture for large view.

Scale Model of a Woodpecker Hit and Miss Engine - Ready to Run

PLEASE ALLOW 2 MONTHS FOR DELIVER. This engine is hand machined by a master machinist and requires two months to produce.

Shipping Weight 33 lbs.



Click on picture for large view.

1/4 Scale Olds Hit and Miss Engine

This is a fully machined ready to run engine!

Model Specifications:
Flywheels - 4 ½ inch
Bore - .875 inch
Stroke - 1.125 inch

Shipping weight 10 lbs.

Click on picture for large view.