Glass Cylinder

This is a beautiful desktop Sterling model engine like found in HAMMACHER SCHLEMMER magazine. It runs on air and does not require water! It also runs on Alcohol and does not require the more expensive esbit tablets to run. This engine is 24 KT Gold plated and is absolutely beautiful to look at and watch run.
Size 2 1/5 in Wide X 5 1/2 in Long X 4 in High

Assembled Ready-To-Run.

Click on picture for large view.



Retail Price $299.98

On Sale Limited Time Offer!

This is a beautiful desktop Sterling model engine. It runs on air and does not require water! It also runs on Alcohol and does not require the more expensive esbit tablets to run. This engine is Finished in Aluminum and is absolutely beautiful to look at and watch run.
Size 2 1/5 in Wide X 5 1/2 in Long X 4 in High

Assembled Ready-To-Run.

Click on picture for large view.

This is a beautiful desktop Sterling model engine. It runs on air and does not require water! It also runs on Alcohol and does not require the more expensive esbit tablets to run. This engine is brushed aluminum and is absolutely beautiful to look at and watch run.
Size 2 1/5 in Wide X 5 1/2 in Long X 4 in High

Assembled Ready-To-Run.

Click on picture for large view.

The Glassworks

See the pistons at work. Look inside the glass cylinders at the Stirling Cycle principle in action. This engine is extremely interesting to watch, is well built, and runs at speeds up to 1500 RPM. This is a hard combination to beat. Gyro-quality ball bearings, machined flywheel, sand cast frame which is painted royal blue, aluminum cooling fins and a hardwood platform are only a few of the outstanding features incorporated into this engine. To illustrate the versatility of a Stirling Engine, we provide a burner for denatured alcohol and a platform for solid fuel. A sample quantity of ESBIT dry fuel is supplied with the engine as well.

Special features include: replaceable and adjustable Pyrex hot cap, replaceable Pyrex power cylinder, dual fuel capability, and a solid hardwood platform. Specifications: 9" length x 4" height x 6" width. Completely assembled and ready to run.

Click on picture for large view.

Click Here to Watch Movie

This Stirling Motor is another member of the Wilesco family and a real decoration on each desk. New technologies combined with a 200-year-old idea led to this powerful Wilesco model for which only one beeswax tea pot candle as energy resource is required. It is powerful enough to drive further Wilesco models or even to light another streetlight. This timeless design and new generation of power of a Stirling motor is a must for all enthousiastic engineers.

Base plate: ca. 250 x 120 mm
Height: ca. 120 mm
Special Gift box: ca. 260 x 130 130 mm

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 13.

Related Products:

Z80 Driving Belts 5 pack $4.95

M53 Circular Saw $22.95

This Stirling Motor is another member of the Wilesco family and a real decoration on each desk. New technologies combined with a 200-year-old idea led to this powerful Wilesco model for which only one beeswax tea pot candle as energy resource is required. It is powerful enough to drive further Wilesco models or even to light another streetlight. This timeless design and new generation of power of a Stirling motor is a must for all enthousiastic engineers.

H 110 Stirlingmotor with dynamo and streetlight
Base plate: ca. 250 x 160 mm
Height: ca. 210 mm
Special Gift box: ca. 260 x 170 130 mm

Click on picture for large view.

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 13.

With this impressing small finished model we retained our typical model engineering character.
The flying wheel is a cast iron part and not a CNC-lathed disk.
All brilliant parts are high-class gilded, i.e. they won't tarnish.
The parts will stay brilliant even after 20 years.

We also retained our WIGGERS-RED as the basic colour.

Heating cylinder and displacer consist of a heat-resistant glass of excellent quality. The wick of the burner is made of fibreglass. The operating piston and the bearings consist of self-lubricating material.
The model is mounted on an oiled wooden plate (70 x 160 mm) made of Abachi-wood. It is heated by normal spirit. The total height is 80 mm.

This item is carried as an in stock item. If the shopping cart allows you to order the item it will be shipped within two days.

Click on picture for large view.

This Stirling Engine is equipped with a bigger fly wheel, which is running between two machine pillars and ensures a good driving mechanism. Regarding the height of the model the heating oven with chimney is conspicuous. The heating oven better concentrates the heat around the heating cylinder; it is operated by a smaller flame and it produces a longer run. Optically the machine pillars and the heating oven, painted in WIGGERS red, give the machine a very appealing construction. All other parts are gilded, so that the model has a good appearance after years. The beech basic board is bright natural and protected with clear lacquer to contamination.

Of course the burner pot is gilded like all other parts, it has a fiberglass wick and the handle of the burner is turned beech.

Measurements of the model: length = 185 mm, width 90 mm, height 170 mm.

The model Stiwi 2 will also be delivered like model Stiwi 1 in a valuable wooden box.

Click on picture for large view.

This stirling model was developed by WIGGERS model engineering. It demonstrates a unique and fascinating movement of levers and rods. The model is not the most fuel efficient but it is optically fascinating and mesmerizing to watch run.

Click on picture for large view.

The movement of the heating and cooling cylinders are constructed in such a way that the whole mechanism is executed by the need for only one crank pin. The connection rods, levers and angles provides for a fascinating process of movement. The adjustment of the number of revolutions is possible through the control knob located on the side of the engine. The slower the model is run with its many side mechanisms, the more appealing is the process of its movement. The model generates a remarkable amount of power due to the big dimensioned fly wheel. This power can be used to run accessories with the pulley attached to the flywheel. The surface is painted and nickel plated to prevent tarnish and corrosion. The design is such that the model is free of maintenance and is heated by methyl spirits. The grooved beech wooden base board of the model centers a an acrylic hood, which gives the model protection. This model is medium sized and needs the following place: length: 280 mm, width: 170 mm, height with hood: 230 mm.

This beaitiful Classic Stirling model engine is the third model produced by the German Manufacture for it's desk and show case models. It has a straight spoke flywheel.

All indicated dimensions are metrical dimensions!

Technical information:
Height:140 mm, Width 100 mm, Length 210 mm
Flying Wheel D-90 mm, Heating-Displacement Glass Cylinder.
The model is heated by spirit.

This item is hand machined by a German master machinist. It is pre order only, please allow 6 months for production and importation from Germany. Call 614-933-9158 to reserve your engine.

This beaitiful Classic Stirling model engine is the third model produced by the German Manufacture for it's desk and show case models. It has a curved spoke flywheel.

All indicated dimensions are metrical dimensions!

Technical information:
Height:140 mm, Width 100 mm, Length 210 mm
Flying Wheel D-90 mm, Heating-Displacement Glass Cylinder.
The model is heated by spirit.



Click on picture for large view.

Lying oscillating model:

This exquisite German made Stirling engine was designed on 3 axes.

We applied 3 axes to our model engineering and we created a lying, oscillating stirling model with some technical particularities: speed regulation, glass cylinder and displacer, spirit tank in the base plate, air guidance through the vertical axes.

Technical information:
Height 75 mm, Width 100 mm, Length 175 mm,
Flying Wheel D-80 mm, glass heating cylinder and displacer.
Both cylinders are oscillating!
Speed regulation.
The model is heated by spirit

In the year 1878 D.W. van Rennes from Utrecht represented in Erfurt this hot air engine to the industry.
We have copied this model, anxious to stay with care optically close to the original.
The water cooling of the model had to be improved by a specially developed water pump.

All indicated dimensions are metrical dimensions!

Technical information:
Height 230 mm, Width 150 mm, Length 315 mm,
Flying Wheel D-120 mm, number of regulations variable.
The model is heated by spirit.

This item is hand machined by a German master machinist. It is pre order only, please allow 6 months for production and importation from Germany. Call 614-933-9158 to reserve your engine.

This balancing stirling engine is suitable for show-cases and as desk table model.
The pillars, levers and rods give the model a very pretentious design, which impressively is confirmed by its mechanic movement.
Because of the glass cylinder design the operating procedure of the STIRLING can be observed easily.
The number of revolutions per minute can be regulated.

All indicated dimensions are metrical dimensions!

Technical information:
Height 200 mm, Width 100 mm, Length 170 mm,
Flying Wheel D-90 mm, Heating-/displacement glass-cylinder.
The model is heated by spirit.

This item is hand machined by a German master machinist. It is pre order only, please allow 6 months for production and importation from Germany. Call 614-933-9158 to reserve your engine.