Hielscher miniature live steam engine

Hielscher

	Live Steam Stanley Steamer Ref: HI-010303 The Stanley twins, F.E. and F.O. produced in 1897 in Newton, Mass., more than 200 Stanley Light Steam Cars. The 8 hp model was capable to speed up to 27 mph / 43 kmh and did sell for $ 750,00. The gentlemen A. L. Barber and J. B. Walker purchased in 1898 the manufacturing rights to the vehicle for $ 250.000. 1908 the Stanley Speedy Roadster was capable of 60 mph / 96 kmh and would run over 50m / 80 Km on a filling water. Till 1927 thousands of Stanley were built. Length 8.85 inch , 225 mm Width 4.13 inch, 105 mm Height 5.51 inch, 140 mm Weight 630 gr. Motor: 2 cylinder Mini- Steam Engine Andreas, self accelerating, double side effect Heating: lighter Gas Steer able and controllable, also via Radio Control: forward, backward, fast, slow stop. stainless materials Hielscher Model # HI-010303 Click on picture for large view. Price: $821.95
	Quantity:

	Live Steam Stanley Steamer Ready to run with Radio Control Ref: HI-010307 Live Steam Stanley Steamer Ready to run with Radio Control. The radio control for the Stanly can control: Steering, forward, backwards, fast, slow, stop and go. Price: $1,125.95
	Quantity:

	Live Steam Stanley Steamer Kit Ref: HI-010304 Kit Form of Above Car. Price: $725.95
	Pre Order Only at this Time

	Grasshopper H0 (1:87) Ref: HI-010112 After the york has won a competition, the owners of the Baltimore & Ohio Rail Road Co. ordered 18 further locomotions from the producer Grillingham & Winans. Because of the strangely appearance with vertical boiler, vertical cylinders and silt formed push rods the locomotion got the nickname Grasshoppe. On 24. August 1835 a Grasshopper carried the first train to Washington. Under the name Columbus 1836 the company G.&W. built a Grasshopper for the Leipzig-Dresdener Eisenbahn the first locomotion that was exported from America to Germany. Technical Data Model Live Steam Alcohol Fueled Length above buffer 3.14 inch, 8 cm Width 1.33 inch, 3.4 cm Height 1.97 inch, 5 cm Boiler, Copper 1.89 inch, 4.8 cm Piston (diametrical) .12 inch, 3 mm Stroke .31 inch, 8 mm Steering oscillating Running time (term) 5.5 min. Fuel spirit Weight 72 gr. Performance (capacity) 2 wagons Speed Model 13 cm/s 5.11 inch/sec Equals original speed of 40 km/h Slope 9% with one wagon Color options / national train selection Stainless materials: brass, copper, nickel silver, stainless steel. Exhaust Steam from chimney. Click on picture for large view. Price: $307.95
	Quantity:

	Glaskasten H0 1:87 Ref: HI-010100 Live steam powered HO scale working model Glaskasten H0 1:87 Locomotive. This is a working steam engine fueled with Alcohol. Technical Data: Model Length: 8 cm Width 3.4 cm Height: 5 cm Boiler, copper: 4.8 cm Piston : 3 mm Stroke: 8 mm Steering: oscillating Running time: 5.5 min Fuel: spirit Weight: 80 g Capacity: 2 wagons Speed (model):l 13 cm/s Speed of original: 40 km/h Gradient: 9% with one wagon Colour options: national train selection Stainless materials: brass, copper, nickel silver Click on picture for large view. Price: $409.95
	Pre Order Only at this Time

	Livesteam Locomotion Pepper Ref: HI-010524 The Pepper is a tiny, inexpensive Live Steam Locomotive. The refilling gastank in the tender fed the gas burner. As soon as there is enough steam, the Pepper starts to make the rounds on isolated wheels. The Pepper can pull two loaded cars. Advice: One car. Order-Nr.: 010514 or 010515 Technical Data: Lenght: 210 mm Hight: 105 mm Weight: 275 g Running time: 15 min. Click on picture for large view. Price: $409.95
	Pre Order Only at this Time

	Hielscher Ore Car gauge I, G Ref: HI-010514 Made of stably metals, with insulated wheels. Technical Data: Ready to run, painted Lenght x Width x Height: 120 x 72 x 90 mm weight: 120 g Click on picture for large view. Price: $409.95
	Pre Order Only at this Time

	Hielscher Grasshopper I, G 1830 Ref: HI-010500 After the York took the honours in a competition, the owners of the Baltimore & Ohio Rail Road Co. ordered a further 18 locomotives from their manufacturer, Gillingham & Winans. Because of their strange appearance with upright boiler, vertical cylinders and stilt shaped piston rods, the locomotives were soon nicknamed Grasshopper. On 24th August 1835 a Grasshopper pulled the first train to Washington. In 1836 under the name Columbus G & W built a Grasshopper for the Leipzig-Dresdener Railway Company, the first locomotive exported from America to Germany. A novel 45 mm steam train with powerful 2 cylinder “Andreas” mini steam engine, gas powered with lighter gas. Made with strong materials. Running time 15 min; wheels are insulated. May be controlled either by hand or remote control with retrofittable electronic speed controller. Also available for retrofitting: pressure gauge and gas pressure control valve. See below for more details. Technical Data: Ready to run, painted Lenght x Width x Height: 200 x 65 x 125 mm Running time: 15 min Weight: 350 g Click on picture for large view. Price: $409.95
	Pre Order Only at this Time

	Hielscher Passenger Car I, G Ref: HI-010502 To go with the Grasshopper Technical Data: Ready to run, painted Lenght x Width x Height: 140 x 85 x 105 mm Weight: 150 g Click on picture for large view. Price: $165.00
	Pre Order Only at this Time

	Hielscher Locomotion Heidi gauge I, G Ref: HI-010504 This light rail locomotive, known as Heidi, is modelled on locomotives built by Orenstein & Koppel. They mostly operated on 600mm gauge tracks. Hundreds of these easily operated locomotives were used day in, day out, for example for peat cutting work and on large construction projects such as canal building, in quarries, brickworks, strip mines and inside factory premises to transport heavy goods. A wonderful garden rail model with powerful 2 cylinder Andreas mini steam engine, self starting, gas powered with lighter gas. Made with strong materials. Running time 15 min; wheels are insulated. May be controlled by hand or remote control with retrofittable electronic speed controller. Also available for retrofitting: pressure gauge and gas pressure control valve. See below for more details. Technical Data: Ready to run, painted Lenght x Width x Height: 200 x 65 x 150 mm Running time: 15 min Weight: 610 g Click on picture for large view. Price: $750.00
	Pre Order Only at this Time

	Western Loco Live Steam HO Scale Ref: HI-010110 Live steam powered HO scale working model Western Locomotive. This is a working steam engine fueled with Alcohol. Click on picture for large view. Price: $426.62
	Quantity:

	Steam Tractor Traction Engine Ref: HI-010320 WORLDS SMALLEST LIVE WORKING STEAM ENGINE This wonderful Live Steam Models scaled 1:43 are built e.g. like the Burell, Aveling & Porter or Fowler from 1910. The rolling power engines have been used in agriculture, road constructions, as road locomotives to pull heavy weights ore as driving engine until 1940. Later on the powerful and easier to operate internal combustion engines substituted the steam engines. Technical Data: Length with tender Traction Engine: 7.87 inch, 200 mm, Road Roller: 8.27 inch, 210 mm width Traction Engine: 1.97 inch, 50 mm, Road Roller: 2.36 inch, 60 mm height Traction Engine: 3.15 inch 80 mm, Road Roller: 3.15 inch, 80 mm weight with tender Traction Engine: 245 gr., Road Roller: 310 gr. running time 20 min motor 2 cylinder mini steam engine Andreas, steer able, self accelerating, double side effect heating pure butane gas lighting piezzo, only press button material stainless materials, brass, German silver Model # HI-010320 ready to run Click on picture for large view. Price: $689.06
	Quantity:

	Miniature Live Steam Turbine Ref: HI-010402 WORLDS SMALLEST LIVE WORKING STEAM TURBIN ENGINE Our newly engineered high-powered Turbine 50 is made of non corrosive metals. The special turbine wheel has a diameter of 50 mm. The pilot valve has two 0.9 mm nozzles arranged opposing in a 30° angle. With this specially designed pilot valve this turbine is variable in speed: forward, backwards, slow, stop. The turbine blades are displaced in a 180° angle on the periphery of the turbine wheel and the steam or compressed air propels the turbine blades. Technical Data: Length: 80 mm Width: 38 mm Height: 75 mm Weight: 200 g RPM on the shaft drive 1.0 bar: 280 RPM 1.5 bar: 350 RPM 2.0 bar: 400 RPM 2.5 bar: 460 RPM 1) Steam inlet 2) Steam outlet 3) Shaft drive 4) Worm gear 1:25 5) Pilot valve Click on picture for large view. Price: $239.85
	Pre Order Only at this Time

	Steam Rail Trolley HO Kit Ref: HI-010063 Kit Form of HI-010063 Only screws no soldering Gage H0 , .65 inch, 16.5 mm Length 2.76 inch, 7 cm Width 1.18 inch, 3 cm Height 2.36 inch, 6 cm Boiler (heat resistant glass) 1.97 inch3, 5 cm3 Piston (diametrical) .12 inch 3 mm Stroke .31 inch 8 mm Steering Oscillating Running time (term) 5 min. Fuel dry (solid fuel) Weight 52 gr. Model # HI-010063 Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $137.81
	Quantity:

	Steam Coach Assembled Ref: HI-010066 WORLDS SMALLEST LIVE WORKING STEAM POWERED COACH Working Live steam powered Coach! Steer able Length 5.31 inch, 13.5 cm Width 2.36 inch, 6 cm Height 3.54 inch, 9 cm Boiler (heat resistant glass) 1.97 inch 5 cm3 Piston (diametrical) .12 inch, 3 mm Stroke .31 inch, 8 mm Steering Oscillating Running time 4 min. Fuel solid fuel Weight 106 gr. Ready to run Model # HI-010066 Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $153.95
	Quantity:

	Steam Coach Kit Ref: HI-010067 Kit Form of HI-010067 Only screws, no soldering Steer able Length 13.5 cm Width 6 cm Height 9 cm Boiler (heat resistant glass) 5 cm3 Piston (diametrical) 3 mm Stroke 8 mm Steering Oscillating Running time 4 min. Fuel solid fuel Weight 106 gr. Model # HI-010067 Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $142.99
	Quantity:

	Steam Car Ref: HI-010090 WORLDS SMALLEST LIVE WORKING STEAM POWERED COACH Working Live steam powered Car! Steerable Click on picture for large view. Length 11 cm Width 6.5 cm Height 9 cm Boiler (heat resistant glass) 5 ccm Piston (diametrical) 3 mm stroke 8 mm Steering Oscillating Running time (term) 4 min. Fuel solid fuel Weight 82 gr. Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $165.95
	Pre Order Only at this Time

	Hielscher Steam Lorry Ref: HI-010068 WORLDS SMALLEST LIVE WORKING STEAM POWERED LORRY Working Live steam powered Truck! Steerable Click on picture for large view. Technical Data: Ready to run Steerable Length: 11.5 cm Width: 5.5 cm Height: 8.5 cm Boiler (heat resistant glass): 5 ccm Piston Ø: 3 mm Stroke: 8 mm Steering: oscillating Running time: 4 min Solid fuel Weight: 110 g Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $165.95
	Pre Order Only at this Time

	Steam Power Station Assembled Ref: HI-010080 WORLDS SMALLEST LIVE WORKING STEAM POWER PLANT Live steam engine power plant with working Dynamo and Light! Length 10.5 cm Width 2.5 cm weight 7 cm Boiler (heat resistant glass) 10 cm3 Piston (diametrical) 3 mm Stroke 8 mm Steering Oscillating Running time 6 min. Fuel solid fuel Weight 68 gr. Ready to run Model # HI-010080 Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $137.81
	Quantity:

	Mini Steam Engine Ref: HI-010082 Miniture Steam Engine Plant to run the miniture shop tools. Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $135.95
	Quantity:

	Drilling Accessory Ref: HI-010070 Miniture Drilling accessory to go with the Hielscher mini steam engine. Price: $60.64
	Quantity:

	Hack Saw Accessory Ref: HI-010072 Miniture Hack Saw accessory to go with the Hielscher mini steam engine. Price: $58.95
	Quantity:

	Grinding Wheel Accessory Ref: HI-010074 Miniture Grinding Wheel accessory to go with the Hielscher mini steam engine. Price: $41.84
	Quantity:

	Transmission Ref: HI-010076 Miniture Transmission accessory to go with the Hielscher mini steam engine. Price: $49.95
	Quantity:

	Circular Saw Accessory Ref: HI-010078 Miniture Circular Saw accessory to go with the Hielscher mini steam engine. Price: $44.05
	Quantity:

	ANDREAS ready to run Ref: HI-010130 This small but mighty steam engine, developed by Lutz Hielscher, is ideally suited for installation in steam ships and boats up to 70 cm in length driven by propellor or paddle wheel, or for installation in steam cars, steam locomotives, or as a stationary mini steam engine for impulsion of a variety of factory models. Propellor up to 40 mm. Category: Steam Engines / Mini Steam Technical Data: Ready to run Width: 3,7 cm Height: 5.0 cm Piston: 7 mm Stroke: 7 mm Steering effective from both sides 2 cylinder oscillating Also controllable via servo: forwards-backwards-fast-slow-stop May be installed either upright or horizontally Weight: 40 g Drive shaft exit to right, left or both side Performance Details: bar \| RPM on engine \| RPM on 1st Shaft 1:3.3 / optional 2nd Shaft 1:11 0,5 1700 515 / 155 1,0 2400 727 / 218 1,5 2880 872 / 261 2,0 3100 939 / 281 Torque at transmission output 1 bar: 17.75 N/cm (shaft cannot be stopped by hand). Performance at 1 bar: 4.30 Watt Category: Steam Engines / Mini Steam Technical Data: Ready to run Width: 3,7 cm Height: 5.0 cm Piston: 7 mm Stroke: 7 mm Steering effective from both sides 2 cylinder oscillating Also controllable via servo: forwards-backwards-fast-slow-stop May be installed either upright or horizontally Weight: 40 g Drive shaft exit to right, left or both side Price: $238.30
	Pre Order Only at this Time

	Hielscher Mini Steam Engine Cottage Ref: HI-010098 The mini steam engine Cottage developed by Lutz Hielscher of Wuppertal is a highlight from the World’s smallest Steam Engines series. The water in the glass boiler is brought to boil by means of a tea light and the steam pressure thus generated powers the oscillating mini steam engine causing the flywheel to rotate. A cottage is a little workshop. For example in the german area “Bergisches Land” have been located a lot of hammer and grinder cottages which were activated by water power. The water power has been replaced by small steam engines in 1800 to become independent of the water. Technical Data: Length: 85 mm Width: 40 mm Height: 64 mm Weight: 49 g Boiler: 5,0 ccm Piston: Ø 3,0 mm Stroke: 8,0 mm Steering: oscillating Running time: 8-10 min Fuel: candle/tee light Material: stainless Steel, brass Price: $238.30
	Pre Order Only at this Time

	Hielscher Mini Paddle Wheel Ref: HI-010132 The Mini Paddles that we have developed are suitable for the "Andreas" mini steam engine. The paddles can be installed to provide side gear drive or rear drive. A small model ship's steam engines will work especially well with these. Technical Data: Diameter: 46 mm Width: 16 mm Axle diameter: 2.5 mm Material: stainless Price: $238.30
	Pre Order Only at this Time

	Hielscher Mini Boiler, Horizontal Ref: HI-010134 Our mini boilers are soldered using brass and copper, and insulated with mahogany wood strips. Comes with a gas burner and refillable lighter-gas tank for producing steam. Technical Data: Horizontal Height without chimney: 3.8 cm Length: 7.0 cm Diameter: 2.6 cm Boiler volume: 30 ccm Running time: 20 min Weight: 116 g Price: $238.30
	Pre Order Only at this Time

	Hielscher condenser Ref: HI-010135 Technical Data: Ready to run Length: 4.3 cm Width: 2.5 cm Height: 5.4 cm Volume: 17 ccm Weight: 22 g Price: $238.30
	Pre Order Only at this Time

	Steam Gondola Kit Ref: HI-010094 Our newest product is a steam gondola, equipped with the smallest series steam engine in the world (developed by Lutz Hielscher) and capable of running for five minutes. This tiny technical wonder clearly demonstrates how movement can be generated from water and fire. In 1700 the great inventors Thomas Newcomen and James Watt used steam pressure to convert the linear oscillating movement of the piston rod into a rotary movement and thus launched the technological age. Technical Data: Length: 20.0 cm Width: 20.0 cm Height: 17.0 cm Boiler (heat resistant glass): 10 ccm Piston ø: 3 mm Stroke: 8 mm Steering: oscillating Running time: 6 min Fuel: solid fuel Weight: 180 g Item is in Kit Form and needs some assembly. Click on picture for large view. Price: $189.24
	Quantity:

	Vacu Mini Ref: HI-010340 This series of vacuum engines, also known as flame eaters or flame lickers, form a new range of products from our workshop. It is possible to regulate this model's running speed (rpm) by varying the distance of the flame from the engine. The Vacu Mini achieves rotational speeds of up to 900 rpm, its quality and performance is every outstanding. Technical Data: length: 150 mm width: 70 mm height: 105 mm weight: 430 g running time: approx. 30 min fuel: spirit piston Ø: 18 mm stroke: 23 mm Click on picture for large view. Price: $292.91
	Quantity:

	Traction Engine add-on kit for Vacu-Mini Ref: HI-010342 Traction Engine add-on kit for Vacu-Mini The Vacu - Mini can be upgraded using an add-on kit. You can transform the Vacu Mini into a Traction Engine gauge I, G (45 mm). Price: $137.24
	Quantity:

	Draisine add-on kit for Vacu-Mini Ref: HI-010343 Draisine add-on kit for Vacu-Mini The Vacu - Mini can also be upgraded using an add-on kit. You can transform the Vacu Mini into a Draisine, gauge I, G (45 mm). Price: $94.19
	Quantity:

	Vacu-Mini Traction Engine Ref: HI-010344 The Vacu - Mini Traction Engine gauge I, G (45 mm) ready to run. Technical Data, Traction Engine: length: 210 mm width: 115 mm height: 130 mm weight: 620 g Click on picture for large view. Price: $440.95
	Quantity:

	Hielscher Stirling 1 Ref: HI-100600 The unusual Hielscher Hot Air Engine -Stirling 1 has a flywheel in the form of a propeller and its displacer cylinder is a thin-walled can made of tin. It can be fuelled using either a spirit burner or tea-light. The number of revolutions per minute will be lower when the engine is operated using a tea-light due to the lower temperature. Technical Data: working cylinder ø: 18.00 mm stroke: 14.00 mm revolutions per minute: 1,500 rpm height: 230 mm width: 120 mm weight: 185 g running time: 20 min with one fill-up of spirit, 3 hrs with a tea-light Click on picture for large view. Price: $238.30
	Quantity:

	Hielscher Stirling 2 Ref: HI-100608 The Hielscher - Stirling 2 demonstrates the workings of the hot air engine perfectly. As the displacer cylinder and the working cylinder are made of heat resistant precision glass, the movement of the pistons can be seen very easily. Another clever feature of this model is the vertical arrangement of the two cylinders one above the other on one axis. Technical Data: working cylinder ø: 18.00 mm stroke: 14.00 mm revolutions per minute: upto 550 rpm height: 210 mm width: 90 mm weight: 450 g running time: approx. 3 hrs with tea-light Click on picture for large view. Price: $291.27
	Quantity:

	Hielscher Stirling 3 Ref: HI-100610 The displacement and working cylinders of the Stirling 3 are also made from heat resistant precision glass and are arranged in a V formation. The rotation speed may be infinitely varied by use of a butterfly valve. Technical Data: working cylinder ø: 18.00 mm displacer cylinder ø: 30.00 mm stroke: 14.00 mm revolutions per minute: 0 - 900 rpm height: 215 mm Llength: 210 mm width: 85 mm weight: 600 g running time: approx. 60 minutes with spirit fuel: spirit Click on picture for large view. Price: $359.10
	Quantity:

	Steam Rail Trolley HO Assembled Ref: HI-010062 WORLDS SMALLEST LIVE WORKING STEAM ENGINE Working Live steam powered HO Scale Engine! Gage H0 ,16.5 mm Length 7 cm Width 3 cm Height 6 cm Boiler (heat resistant glass) 5 cm3 Piston (diametrical) 3 mm Stroke 8 mm Steering Oscillating Running time (term) 5 min. Fuel dry (solid fuel) Weight 52 gr. Model # HI-010062 ready to run Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page. Price: $137.81
	Quantity:

	O-Ring for piston cylinder Ref: HI-010001 O ring that holds piston in place. Price: $3.26
	Quantity:

	Hielscher driving band for steam engine accessories - Large Ref: HI-010004 Hielscher driving band for steam engine accessories Price: $5.66
	Quantity:

	Hielscher driving band for steam engine accessories - Small Ref: HI-010005 Hielscher driving band for steam engine accessories - Small Price: $4.15
	Quantity:

	Replacement Glass Pyrex Boilers - Small Ref: HI-010002 Small Glass Boilers (Height 1 3/16 in.) Price: $25.31
	Quantity:

	Replacement Glass Pyrex Boilers - Large Ref: HI-010003 Large Glass pyrex boilers (Height 1 5/8 in.) Price: $25.31
	Quantity:

	Shell Valvata J Oil 460 - Steam Cylinder Oil Ref: Shell 460 One bottle Steam Cylinder Oil. Valvata J has excellent film strength. Viscosity Grade 460. Developed by Shell for the sole purpose of lubricating steam cylinders in the presence of wet steam. 1 oz bottle. Price: $4.75
	Quantity:

	One Box of Esbit Fuel Ref: Esbit 1 Pack Esbit fuel tablets differ from most other solid fuel tablets in that they are non-toxic and completely consume themselves when burned. Most other fuel tablets leave a toxic residue behind. The manufacturer states that Esbit fuel tabs can be safely burned inside a properly ventilated room. They are very small and extremely light weight. They burn for about 15 minutes and are a great toy steam engine fuel. Sold by the box. One box contains 20 tablets 4 grams each. Shown in picture is one CASE of esbit which contains 36 boxes. Price: (4 or fewer items) $6.95 Price: (5 to 9 items) $5.00 Price: (10 to 19 items) $4.75 Price: (20 to 35 items) $4.50 Price: (36 or more items) $3.99
	Quantity:


[ Home ] [ Up ] [ Catalog ] [ Terms & Conds ] [ Search ] [ View Basket ] [ Checkout ] [ Contact Us ] [ Login ]