Hit and Miss Engines Casting Kits

Galloway - 1/3 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/3 Scale Model Hit and Miss Engine Casting Kit

Kit Contains:

Cast Iron Castings (8)
2 flywheels, base, bearing caps, cylinder, cylinder sleeve, head, and water hopper

Bronze Castings (9)
Conn. rod block, igniter, igniter trip, push rod brackets, governor bracket, carburetor, rocker arm bracket, muffler top and bottom

Aluminum Castings (1)
Piston

Detailed Blueprints (7) 17" x 22", Set of Gears (Exact width, bore, and one with shallow keyway)

Optional Cast Iron: Sub-base is now included!

Galloway Model Specifications:
Flywheels - 10.200 inch
Bore Diameter - 1.750 inch
Stroke - 3.375 inch

These kits are castings that must be machined.

Shipping weight 80 lbs. Galloway Paint: Dulux 93-066-H Red

NOTE: WE HAVE RE-DRAWN THE PLANS TO THIS ENGINE IN AUTO CADE. WE HAVE CORRECTED ALL MISTAKES THAT WERE PREVIOUSLY FOUND IN THE ORIGINAL SHELLY DRAWINGS.



Click on picture for large view.

Related Products:

Galloway 1-3 Scale Ignitor Finished $200.00

Galloway 1-3 Scale Mixer Finished $200.00

Wooden Base for 1-3 Galloway Hit & Miss Engine with Electronics $368.80

Galloway 1-3 Scale Ignitor Finished

For those machinist that are unsure they can complete this kit because of the Ignitor we are offering it already machined..

Click on picture for large view.

Galloway 1-4 Scale Mixer Finished

For those machinist that are unsure they can complete this kit because of the Mixer we are offering it already machined..

Click on picture for large view.

If you don't like to do wood work purchase this wooden base with coil and battery to run your Galloway hit and miss engine.

Galloway - 1/4 Scale of 5 HP Hit and Miss Engine With NEW CAD DRAWINGS. All of the Galloway casting kits have redrawn plans. The errors have been removed.

Galloway Water Cooled 1/4 Scale Model Hit and Miss Engine Casting Kit

Kit Contains:

Cast Iron Castings (8)
2 flywheels, base, bearing caps, cylinder, cylinder sleeve, head and sub-base

Bronze Castings (9)
Connecting rod bearing, carburetor, igniter, push rod brackets, governor bracket, rocker arm bracket, muffler top and muffler bottom.

Aluminum Castings (2)
Water hopper and Piston

Set of Gears (Bored to size)
Detailed Blueprints (5) 17" x 22", (3) 1 ½" x 14", (1) 8 ½" x 11"

¼ Scale Galloway Specifications:
Flywheels - 7.625 inch
Bore - 1.312 inch
Stroke - 2.530 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping Weight 37 lbs. Galloway Paint: Dulux 93-066-H Red

NOTE: An Investment Cast Steel Crankshaft cast from a lost wax pattern is available separately. This is available for the ¼ scale Galloway only. (crankshaft must be machined). Available Separately See Below.



Click on picture for large view.

Galloway 1/4 Scale 3D PDF Picture

Related Products:

Galloway 1/4 Scale Model Hit and Miss Engine Casting Kit $49.95

Galloway 1-4 Scale Ignitor Finished $200.00

Galloway 1-4 Scale Mixer Finished $200.00

Wooden Base for 1-4 Galloway Hit & Miss Engine with Electronics $368.80

Galloway - 1/4 Scale of 5 HP Hit and Miss Engine

This is a lost wax casting for the 1/4 Galloway Crank

Click on picture for large view.

Galloway 1-4 Scale Ignitor Finished

For those machinist that are unsure they can complete this kit because of the Ignitor we are offering it already machined..

Click on picture for large view.

Galloway 1-4 Scale Mixer Finished

For those machinist that are unsure they can complete this kit because of the Mixer we are offering it already machined..

Click on picture for large view.

If you don't like to do wood work purchase this wooden base with coil and battery to run your Galloway hit and miss engine.

Galloway - 1/6 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/6 Scale Model Hit and Miss Engine Casting Kit

NOTE: WE HAVE RE-DRAWN THE PLANS TO THIS ENGINE IN AUTO CADE. WE HAVE CORRECTED ALL MISTAKES THAT WERE PREVIOUSLY FOUND IN THE ORIGINAL SHELLY DRAWINGS.

Galloway Paint: Dulux 93-066-H Red

Click on picture for large view.

Related Products:

Wooden Base for 1-6 Galloway Hit & Miss Engine with Electronics $368.80

If you don't like to do wood work purchase this wooden base with coil and battery to run your Galloway hit and miss engine. Includes wooden box with coil.

NOTE: WE HAVE RE-DRAWN THE PLANS TO THIS ENGINE IN AUTO CADE. WE HAVE CORRECTED ALL MISTAKES THAT WERE PREVIOUSLY FOUND IN THE ORIGINAL SHELLY DRAWINGS.



Click on picture for large view.

Galloway - 1/8 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/8 Scale Model Hit and Miss Engine Casting Kit

Flywheel 3.82" Bore .623" Stroke .625"

Galloway Paint: Dulux 93-066-H Red

Click on picture for large view.

Related Products:

Wooden Base for 1-8 Galloway Hit & Miss Engine with Electronics $368.80

If you don't like to do wood work purchase this wooden base with coil and battery to run your Galloway hit and miss engine. Includes wooden box with coil.

Water Cooled Red Wing Motor 1/4 Scale - Engine Casting Kit

Bore 1-1/2", Stroke 2", Gasoline Engine

The 5 HP Red Wing Engine was the inspiration for this fully functional quarter scale model.It runs on regular gasoline and uses a buzz coil as an ignition source.

This bronze and iron engine comes with 10 bronze castings and 9 iron castings and several small parts such as springs, gears, piston rings and other small parts needed to build your engine along with a complete set of working drawings.

This is a casting kit that requires a lathe and a mill to complete.

Click on picture for large view of Castings.

Related Products:

Oak Buzz Coil $168.95

Detailed Machining Directions for The Red Wing Hit & Miss Engine $19.95

Drain Cock 3/16 - 40 $26.50

A CD of detailed instruction on how to machine the Water Cooled Red Wing.

Over 275 detailed pictures of how to set up each machining process for this engine. An invaluable tool for machining the Red Wing Hit and Miss Engine.

This high quality Buzz Coil provides a powerful spark. It will operate from a wide range of DC voltages. A small 9 Volt rechargeable battery pack is commonly used as a power source. It works just as well when a 12 Volt car battery is used as the power source. The box measures 4-1/2" x 2-3/4" x 3-1/4" tall and is constructed from Oak.

Air Cooled Red Wing Motor 1/3 Scale - Engine Casting Kit

Bore 1-1/2", Stroke 2", Gasoline Engine

The 2.5 HP air cooled Red Wing Engine was the inspiration for this fully functional one third scale model. It runs on regular gasoline and uses a buzz coil as an ignition source.

This bronze and iron engine comes with 10 bronze castings and 11 iron castings and several small parts such as springs, gears, piston rings and other small parts needed to build your engine along with a complete set of working drawings.

This is a casting kit that requires a lathe and a mill to complete.

Click on picture for large view.

Related Products:

Oak Buzz Coil $168.95

Drain Cock 3/16 - 40 $26.50

Scale Model of a Woodpecker Hit and Miss Engine - Casting Kit

Kit Contains:

Cast Iron Castings (6)
Base, Head, Bearing blocks, Cylinder sleeve, 2 Flywheels

Aluminum Castings (3)
Sub-base, Waterhopper, and Piston

Bronze Castings (9)
Rocker Arm Bracket, A & B Governor Weights, Cam Lever, Rocker Arm, Governor Lock, Connecting Rod, Muffler Top and Muffler Bottom

Other Items
Set of Gears, Blueprints (7), Spring (Makes 3 springs)

Woodpecker Model Specifications:
Flywheels - 6.375 inch
Stroke - 1.937 inch
Bore - 1.312 inch

Foundry castings that must be machined.

Shipping Weight 33 lbs.

Paint: Dulux - V7738 Hunter Green



Click on picture for large view.

Schafer's Little York Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (3)
Base, head and fender

Cast Iron Castings (6)
2 flywheels, cylinder, 2 valve cages, and piston

Bronze Castings (9)
Conn. rod, rocker arm, timing arm, 2 gov. weights, gov. brackets, arm retainer, speed adjustable block and camshaft bearing

Set of Boston Gears
Photographs (2)
Detailed Blueprints (4) 17" x 22"

Schaefer Model Specifications:
Flywheels - 4 ½ inch
Bore - .750 inch
Stroke - 1.50 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.

Paint: Dulux - 51907 Navy Blue



Click on picture for large view.

Paul Breisch Lil Brother Air Cooled Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (1)
Piston

Cast Iron Castings (7)
2 Flywheels, Cylinder Cap, Base, Air Cooled Cylinder, Bearing Caps

Set of Boston Gears
Detailed Blueprints
Name Plate

Little Brother Model Specifications:
Flywheels - 4 ½ inch
Bore - .750 inch
Stroke - 1.0 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.

Click on picture for large view.

Paul Breisch Lil Brother Air Cooled Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (1)
Piston

Cast Iron Castings (7)
2 Flywheels, Cylinder Cap, Base, Water Hopper, Bearing Caps

Set of Boston Gears
Detailed Blueprints
Name Plate

Little Brother Model Specifications:
Flywheels - 4 ½ inch
Bore - .750 inch
Stroke - 1.0 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.



Click on picture for large view.

1/4 Scale Olds Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (1)
Piston

Cast Iron Castings (5)
2 Flywheels, Cylinder Head, Base and Water Hopper, Bearing Caps

Bronz (2)
Connecting Rod, Igniter Trip

Detailed Blueprints

Model Specifications:
Flywheels - 4 ½ inch
Bore - .875 inch
Stroke - 1.125 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.

Also Needed:
Coles Power Models QTY
Connecting Rod Oiler - VR/2 1
Crankshaft Oiler - 29R2/3 2
3/16-40 M+P Brass Elbow 1
1/4-40 M+P Brass Nipple (Close 3/8) 1
Union Cock for 1/8" Tube Water Drain - 29L7/1 1
Piston Ring 1/16 X 7/8 3
Spark Plug 1/4-32 NGK 1

Local Purchase
Battery and Switch 1

Boston Gears
Crank Gear - Y2418 1
Cam Gear - Y2436 1

Springs (Century Spring Company)
Intake - S-60 1
Exhaust - S-794 1
Mixing Valve - DD-3 1
Timer Return - ZZI-25 1
Governor Control - N-15 1

S+S Ignitions
CDI-W/T Lite 1
Clip for Y4-32 Plug 1
Magnet 3/32 X 3/32 Round 1
Hall Futaba 1
Fut.Bat W-f 1

Click on picture for large view.

Perkins Scale Model Hit and Miss Engine Casting Kit

Kit Contains:

Cast Iron Castings (13)
2 flywheels, Belt Wheel, Base, Sub-Base, Bearing Caps, Connecting Rod, Carburetor, Water Hopper and Piston

Set of Gears (Bored to size)
Springs
Name Plate
Teflon
Detailed Blueprints (3) 17" x 22"

Specifications:
Flywheels - 7.625 inch
Bore - 1.5 inch
Stroke - 2.530 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping Weight 37 lbs

Click on picture for large view.