Hit and Miss Engine

Water Cooled Red Wing Motor 1/4 Scale. This is a factory machined and completed engine.

The 5 HP Red Wing Engine was the inspiration for this quarter scale version. This model is fully functional and has a 2 inch stroke, a 1.25 inch bore and has 8 inch flywheels. It runs on camping fuel and uses a buzz coil as an ignition source.

This bronze and iron engine is completely machined, painted, assembled, tested and ready to run.

The engine is all hand machined! (The drain cock shown is optional (drain cock part DC-3, $27.00)).

Click on picture for large view.

Water Cooled Red Wing Motor 1/4 Scale - Engine Casting Kit

Bore 1-1/2", Stroke 2", Gasoline Engine

The 5 HP Red Wing Engine was the inspiration for this fully functional quarter scale model.It runs on regular gasoline and uses a buzz coil as an ignition source.

This bronze and iron engine comes with 10 bronze castings and 9 iron castings and several small parts such as springs, gears, piston rings and other small parts needed to build your engine along with a complete set of working drawings.

Click on picture for large view of Castings.

Air Cooled Red Wing Motor 1/3 Scale - Engine Casting Kit

Bore 1-1/2", Stroke 2", Gasoline Engine

The 2.5 HP air cooled Red Wing Engine was the inspiration for this fully functional one third scale model. It runs on regular gasoline and uses a buzz coil as an ignition source.

This bronze and iron engine comes with 10 bronze castings and 11 iron castings and several small parts such as springs, gears, piston rings and other small parts needed to build your engine along with a complete set of working drawings.

Click on picture for large view.

Water Cooled Hit and Miss Engine

Miniature Hit and Miss Working Engine

Enjoy this hand machined hit and miss engine. Simply attach a 7.5 volt battery and add gas and watch in amazement as the engine puts away on your Desktop! A true marvel and work of art. This engine took over 150 hours of machining to produce. These engines have only been test run. Available in green or red.

Engine
Length: 8 inches
Height:: 5 1/2 inches
Flywheel: 4 7/8 inches
Material: Brass and Cast Iron

Base
Length: 12 inches
Wide: 7 1/4 inches
Total height engine and base: 9 1/8 inches

This bronze and iron engine is completely machined, painted, assembled, tested and ready to run.

The engine is all hand machined!

Click on picture for large view.

Galloway - 1/3 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/3 Scale Model Hit and Miss Engine Casting Kit

Kit Contains:

Cast Iron Castings (8)
2 flywheels, base, bearing caps, cylinder, cylinder sleeve, head, and water hopper

Bronze Castings (9)
Conn. rod block, igniter, igniter trip, push rod brackets, governor bracket, carburetor, rocker arm bracket, muffler top and bottom

Aluminum Castings (1)
Piston

Detailed Blueprints (7) 17" x 22", Set of Gears (Exact width, bore, and one with shallow keyway)

Optional Cast Iron: Sub-base is included!

Galloway Model Specifications:
Flywheels - 10.200 inch
Bore Diameter - 1.750 inch
Stroke - 3.375 inch

These kits are castings that must be machined.

Shipping weight 68 lbs.

NOTE: WE HAVE RE-DRAWN THE PLANS TO THIS ENGINE IN AUTO CADE. WE HAVE CORRECTED ALL MISTAKES THAT WERE PREVIOUSLY FOUND IN THE ORIGINAL SHELLY DRAWINGS.

Click on picture for large view.

Galloway - 1/3 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/3 Scale Model Hit and Miss Engine Machined Kit

Kit Contains: ALL machined parts for the Galloway 1/3 hit and miss engine. You have to paint the engine make the coil and supply battery and fuel to run your engine.

Galloway Model Specifications:
Flywheels - 10.200 inch
Bore Diameter - 1.750 inch
Stroke - 3.375 inch

Shipping weight 68 lbs.

Click on picture for large view.

Galloway - 1/3 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/3 Scale Model Hit and Miss Engine Fully Finished

Ready to run model

Galloway Model Specifications:
Flywheels - 10.200 inch
Bore Diameter - 1.750 inch
Stroke - 3.375 inch

Shipping weight 68 lbs.

Click on picture for large view.

Galloway - 1/4 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/4 Scale Model Hit and Miss Engine Casting Kit

Kit Contains:

Cast Iron Castings (8)
2 flywheels, base, bearing caps, cylinder, cylinder sleeve, head and sub-base

Bronze Castings (9)
Connecting rod bearing, carburetor, igniter, push rod brackets, governor bracket, rocker arm bracket, muffler top and muffler bottom.

Aluminum Castings (2)
Water hopper and Piston

Set of Gears (Bored to size)
Detailed Blueprints (5) 17" x 22", (3) 1 ½" x 14", (1) 8 ½" x 11"

¼ Scale Galloway Specifications:
Flywheels - 7.625 inch
Bore - 1.312 inch
Stroke - 2.530 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping Weight 37 lbs

NOTE: A Cast Steel Crankshaft cast from a lost wax pattern is available separately. This is available for the ¼ scale Galloway only. (crankshaft must be machined). Available Separately See Below.

Click on picture for large view.

Galloway - 1/4 Scale of 5 HP Hit and Miss Engine

This is a lost wax casting for the 1/4 Galloway Crank

Click on picture for large view.

Galloway - 1/6 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/6 Scale Model Hit and Miss Engine Casting Kit

NOTE: WE HAVE RE-DRAWN THE PLANS TO THIS ENGINE IN AUTO CADE. WE HAVE CORRECTED ALL MISTAKES THAT WERE PREVIOUSLY FOUND IN THE ORIGINAL SHELLY DRAWINGS.

Click on picture for large view.

Galloway - 1/8 Scale of 5 HP Hit and Miss Engine

Galloway Water Cooled 1/8 Scale Model Hit and Miss Engine Casting Kit

Click on picture for large view.

Scale Model of a Woodpecker Hit and Miss Engine - Casting Kit

Kit Contains:

Cast Iron Castings (6)
Base, Head, Bearing blocks, Cylinder sleeve, 2 Flywheels

Aluminum Castings (3)
Sub-base, Waterhopper, and Piston

Bronze Castings (9)
Rocker Arm Bracket, A & B Governor Weights, Cam Lever, Rocker Arm, Governor Lock, Connecting Rod, Muffler Top and Muffler Bottom

Other Items
Set of Gears, Blueprints (7), Spring (Makes 3 springs)

Woodpecker Model Specifications:
Flywheels - 6.375 inch
Stroke - 1.937 inch
Bore - 1.312 inch

Foundry castings that must be machined.

Shipping Weight 33 lbs.

Click on picture for large view.

Schaefer's Little York Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (3)
Base, head and fender

Cast Iron Castings (6)
2 flywheels, cylinder, 2 valve cages, and piston

Bronze Castings (9)
Conn. rod, rocker arm, timing arm, 2 gov. weights, gov. brackets, arm retainer, speed adjustable block and camshaft bearing

Set of Boston Gears
Photographs (2)
Detailed Blueprints (4) 17" x 22"

Schaefer Model Specifications:
Flywheels - 4 ½ inch
Bore - .750 inch
Stroke - 1.50 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.

Click on picture for large view.

Paul Breisch Lil Brother Air Cooled Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (1)
Piston

Cast Iron Castings (7)
2 Flywheels, Cylinder Cap, Base, Air Cooled Cylinder, Bearing Caps

Set of Boston Gears
Detailed Blueprints
Name Plate

Little Brother Model Specifications:
Flywheels - 4 ½ inch
Bore - .750 inch
Stroke - 1.0 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.

Click on picture for large view.

Paul Breisch Lil Brother Air Cooled Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (1)
Piston

Cast Iron Castings (7)
2 Flywheels, Cylinder Cap, Base, Water Hopper, Bearing Caps

Set of Boston Gears
Detailed Blueprints
Name Plate

Little Brother Model Specifications:
Flywheels - 4 ½ inch
Bore - .750 inch
Stroke - 1.0 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.



Click on picture for large view.

1/4 Scale Olds Hit and Miss Casting Kit

Kit Contains:

Aluminum Castings (1)
Piston

Cast Iron Castings (5)
2 Flywheels, Cylinder Head, Base and Water Hopper, Bearing Caps

Bronz (2)
Connecting Rod, Igniter Trip

Detailed Blueprints

Model Specifications:
Flywheels - 4 ½ inch
Bore - .875 inch
Stroke - 1.125 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping weight 10 lbs.

Also Needed:
Coles Power Models QTY
Connecting Rod Oiler - VR/2 1
Crankshaft Oiler - 29R2/3 2
3/16-40 M+P Brass Elbow 1
1/4-40 M+P Brass Nipple (Close 3/8) 1
Union Cock for 1/8" Tube Water Drain - 29L7/1 1
Piston Ring 1/16 X 7/8 3
Spark Plug 1/4-32 NGK 1

Local Purchase
Battery and Switch 1

Boston Gears
Crank Gear - Y2418 1
Cam Gear - Y2436 1

Springs (Century Spring Company)
Intake - S-60 1
Exhaust - S-794 1
Mixing Valve - DD-3 1
Timer Return - ZZI-25 1
Governor Control - N-15 1

S+S Ignitions
CDI-W/T Lite 1
Clip for Y4-32 Plug 1
Magnet 3/32 X 3/32 Round 1
Hall Futaba 1
Fut.Bat W-f 1

Click on picture for large view.

1/4 Scale Olds Hit and Miss Engine

This is a fully machined ready to run engine!

Model Specifications:
Flywheels - 4 ½ inch
Bore - .875 inch
Stroke - 1.125 inch

Shipping weight 10 lbs.

Click on picture for large view.

Perkins Scale Model Hit and Miss Engine Casting Kit

Kit Contains:

Cast Iron Castings (13)
2 flywheels, Belt Wheel, Base, Sub-Base, Bearing Caps, Connecting Rod, Carburetor, Water Hopper and Piston

Set of Gears (Bored to size)
Springs
Name Plate
Teflon
Detailed Blueprints (3) 17" x 22"

Specifications:
Flywheels - 7.625 inch
Bore - 1.5 inch
Stroke - 2.530 inch

A lathe and milling machine are needed to finish the castings and to fabricate the additional parts required.

Shipping Weight 37 lbs

Click on picture for large view.

This high quality Buzz Coil provides a powerful spark. It will operate from a wide range of DC voltages. A small 9 Volt rechargeable battery pack is commonly used as a power source. It works just as well when a 12 Volt car battery is used as the power source. The box measures 4-1/2" x 2-3/4" x 3-1/4" tall and is constructed from Oak.

Machine Drawings of Schaeffer's Little York Model Hit and Miss Engine

Click on picture for large view.

Machine Drawings to Build Scale Model of a Woodpecker Hit and Miss Engine

Click on picture for large view.

Machine Drawings for the Galloway 1/3 Scale Model Hit and Miss Engine


Click on picture for large view.

Machine Drawings for the Galloway 1/4 Scale Model Hit and Miss Engine


Click on picture for large view.

Machine Drawings for the Galloway 1/6 Scale Model Hit and Miss Engine


Click on picture for large view.

Machine Drawings for the Galloway 1/8 Scale Model Hit and Miss Engine


Click on picture for large view.