Krick Model Boats

Krick U Boat Type VII Grundbaukasten

Description: Submarine type VII b.
The type VII was the most well-known submarine. Over 1000 in different versions were built. This type is characterized by its particularly harmonious form, which resembles more a ship than a modern submarine. This model is a component system with all stampings from high-quality abs plastic.
The trunk of the submarine type VII b consists of a deck of two half shells, the dipping tank, ballast tank for water ballast as well as the outer thin material, so that all slots and openings can be recognized well. The structure of tower is likewise built up from several punched ABS parts. All fittings as well as the two cannons are contained in the foundation engineering box.
The technology: The dipping process of this model is semi-dynamic, i.e. the fact that a pump and a flood tank are contained in the dipping set, which only work supporting for dynamic (by speed supported) dipping.
Additional: 20311 drive and dipping set for component system sold separately.
Technical data: Scale: 1:60 Length: 1120 mm Width: 125 mm Height: 170 mm

Krick-20311 accessory set not included.

Click on picture for large view of kit.

Krick U Boat Type VII Grundbaukasten Accessory Kit.

Description: Submarine type VII b.Krick U Boat Type VII Accessory Kit Antriebs- und Tauchset

Click on picture for large view of kit.

Krick Anna is a small open launch, the ideal for introduction to steam sailing.
The hull is vacuum formed ABS, all timber work is CNC cut making this a very easy model to construct, the figure and fenders are additional accessories. Scale 1:10 Details: Length: 24 in. (610 mm); Beam: 10 1/4 in. (260 mm); Height to Deck: 4in. (101.6 mm)

The engine and boiler (NOT INCLUDED) are fully visible on the top deck.

The hull is constructed of ABS and all plywood parts are laser-cut.

Krick Victoria accessory set not included.

The Wilesco D49 marine engine will work with this model.

Click on picture for large view of kit.

Click on This Text for Assembly and Operating Instructions

Krick Victoria Steam Boat Kit
At the turn of the century the steam boat became popular. It was fashionable to own a steam boat, either as a private yacht, working boat or for passenger transportation. The model Victoria (circa 1905) has been created for the steam engine enthusiast. The engine and boiler (NOT INCLUDED) are fully visible on the top deck.

The hull is constructed of ABS and all plywood parts are laser-cut. Assembled time for this launch is approximately 150-200 hours.
Technical Data: Scale: 1:10, Length: 46 1/3 in. (1177 mm), Beam: 10 1/3 in. (253 mm)
Krick recommends: steam plant Victor with vertical boiler and gastank plus filling valve (not included).
Krick Victoria accessory set not included.

Click on picture for large view of kit.

Click on This Text for Assembly and Operating Instructions

Krick Victoria Accessory Set

Click on picture for large view of kit.

Krick Alexandra Steam Boat Kit

With the Alexandra we have managed to create a typical steam launch from the beginning of this century (circa 1900). The slim hull shape reminds us of this time period, which brought us so many elegant boats. The kit is of outstanding quality. All plywood parts have been laser-cut. The hull is from ABS 1.5mm strong. Propeller and shaft are included with the kit.

Technical Data Length: 37" (940mm) Height including chimney: 11" (280mm) Beam: 7 1/2" (190mm) Scale: 1:10

Krick Alexandra accessory set not included.

Steam Plant NOT INCLUDED in the kit. The Wilesco D49 will work with this kit. (Burner Kit BIX026 will work wtih the D49).

Click on picture for large view of kit.

Click on This Text for Operating Instructions

Alexandra Accessory Set

Click on picture for large view of kit.

Krick Borkum Kit

The Borkum is a typical North Sea island supply vessel from around the turn of the century. This model is ideal for customising to your own taste using special accessories like freight, tools or passengers.
The Borkum s very easy to build, the hull is made from vacuum formed ABS and is fully CNC cut at the deck. All wooden parts are laser cut for accuracy. Screw shaft and pipe as well as brass prop and the rudder linkage are included in the kit. Scale: 1:10 Details: Length: 35 1/2 in.(940mm), Beam: 13 in.(330mm)
Recommended Steam Engine: MSM Clyde Steam Plant (see below) or Wilesco D49 (low end) (Steam Plant not included).
Krick Borkum accessory set not included.

Steam Plant NOT INCLUDED in the kit.



Click on picture for large view.

Click on This Text for Magazine Article on Borkum and Clyde Steam Plant.

Click on This Text for Assembly and Operating Instructions

Borkum Accessory Set

Click on picture for large view of kit.

Supplied:
Mounting Tray P/N 2786
3 in. Vertical Boiler P/N 4059
3 in. Burner Kit P/N 4016
Clyde Twin Cylinder Engine P/N 5045
1-1/2 in. Vertical Refillable Gas Tank P/N 4272
1-1/4 in. Exhaust Oil Separator P/N 4062
Refillable Gas Tank Adaptor- Long (95 mm) P/N 4357
Screws/Bolts for Securing Components to Mounting Tray
Connecting piping for all components.
Wood lagging, brass binding strips and instructions fro lagging the boiler.

Not supplied:
Mounting Screws for fixing tray into the boat
Engine output shaft connections.

Click on This Text for Magazine Article on Borkum and Clyde Steam Plant.

Click On This Text For Operating Instruction For This Steam Engine

Hartman Bunker Boat hulls 61" by 11 3/16".

Fiberglass with predrilled shaft log.

Click on picture for large view.