Mamod Accessories

Ceramic Burner for Mamod Traction Engine. Replaces Coal Scuttle with Ceramic Burner. Turbo Charge your Mamod. The ceramic burner will heat the boiler to higher temperature increasing the power of the engine.

Click on picture for large view.

Ceramic Burner for Mamod Traction Engine. Turbo Charge your Mamod. The ceramic burner will heat the boiler to higher temperature increasing the power of the engine.

This unit requiers the purchase of the Mamod Coal Scuttle.

Must use the FTBIX 019 to refill this tank.

Click on picture for large view.

Click on This Text for Diagrams of Burners

Click on This Text for Instruction PDF File for BIX Burner

One 1 oz Bottle Steam Cylinder Oil.

Valvata J has excellent film strength. Viscosity Grade 460. Developed by Shell for the sole purpose of lubricating steam cylinders in the presence of wet steam.
1 oz bottle.

Esbit fuel tablets differ from most other solid fuel tablets in that they are non-toxic and completely consume themselves when burned. Most other fuel tablets leave a toxic residue behind. The manufacturer states that Esbit fuel tabs can be safely burned inside a properly ventilated room. They are very small and extremely light weight. They burn for about 15 minutes and are a great toy steam engine fuel.

Sold by the box. One box contains 20 tablets 4 grams each. Shown in picture is one CASE of esbit which contains 36 boxes.

Mamod Solid Fuel. Interchangable with esbit fuel.

Brass Chimney Cowl to finish off your model with that extra rich look.
(approx. 1 1/4 in. in diameter (outside diameter, i.e.))

Holder to fit small butane gas tank.

Whistle Assembly
Thread size 1/4" BSF

Safety Valve

Oil Can 125cc For use with heavier motor oil for lubricating wheels and steering. Not for the lighter Steam Cylinder Oil.
Oil can does not come with oil.

Dynamo for use with SP5D, Showman, SP2D

Steam Water Level Plug

Scuttle for Traction Engines

Spring for Cylinder bolt.

Cylinder Bolt

Steam Piston + Cylinder for all engines (stationary, cars, TE1A, vans or busses) execpt SP4 and SP5

Standard Piston/Cylinder Assembly for SP4 and SP5

Sight Glass Assembly

Funnel

TE1A Steering Rod Steering Rod

Mamod Smoke Stack for Stationary Engines: SP2 (1332), SP4 (1334), SP5 (1335), SP6

Burner Tray TE1A, SR1a, Brooklands Tourer, Roadster etc.
(in inches: 5 1/2 L x 1 3/8 W x 9/16 H (Length includes handle; fuel
tray itself is actually 2 1/2 in.))

Fits the Mamod TE1A and SR1 Driving models Steam Roller and Traction Engine

Drive band for the Steam Wagons /SW1 (the larger band for the back of the SW1/Steam Wagons)

E 62 Driving Band for the Roadster , Limo

Flexible driving belt. This is band is for the workshop. (4 (E42s)are needed for the workshop WS1; the E51 driveband connects the WS1 to another engine)
Also for the Steam Wagons SW1 (for the front of the SW1)

Burner Tray with Shield - SP2, SP4;
in inches: 5 3/8 L x 1 3/8 W x 1/2 H (fuel tray itself is 2 1/8
in.; with handle is 5 3/8 in.)

Burner Tray with Shield - SP5
(in inches: 7 1/4 L x 1 7/16 W x 1/2 H (fuel tray itself is 4 1/2
in.; with handle is 7 1/4 in.)

Bag of Washers

Steering Rod SA1 Limousine

Loco Sight Glass

Canopy (Steam Roller)

Black Pulley for Showman's Engine. Also for use on the Eitech-C17 Ferris Wheel. This pulley can be put on the Ferris Wheel to allow you to run the Ferris Wheel with a live steam engine. Recommended steam engines are Wilesco D10 and above, Jensen model 75 and larger, and Mamod SP 5 and larger.

Workshop Power Press Accessory.

Related Products:

Z80 Driving Belts 5 pack $4.95

Workshop Polishing Mop Accessory.

Related Products:

Z80 Driving Belts 5 pack $4.95

Workshop Grinder Accessory.

Related Products:

Z80 Driving Belts 5 pack $4.95

Workshop Hammer Accessory.

Related Products:

Z80 Driving Belts 5 pack $4.95

Use this valve to connect your aircompressor to your steam engine. You can regulate the flow of air to your engine using this valve. Note you also need Compressor Air Boiler adapter for your engine and rubber tubing.

Click on picture for large view.

Use this line to connect your aircompressor to you steam engine. (Buy it by the foot length)

Click on picture for large view.

Use this 500 ml bottle to fill the hard to get to boiler of your Wilesco traction engine.

Click on picture for large view.