Online Catalogue
Start of Content
Shop By ProductVideos of EnginesStationary Steam EnginesTraction Steam EnginesSteam Powered Fire TrucksSteam Cars, Vans, etc.Stirling EnginesTurbine EnginesFlame EaterSteam LayoutsKitsPartsSteam AccessoriesFuel, Oil & BeltsSale! Click Here!Museum Quality EnginesBoats - Marine EnginesInternal Combustion EnginesTrainsTin ToysBoilersCasting KitsBurners and BeltsBooks and VideosErector Eitech SetsUsed ItemsHand Made Steam Model Boats RC Radio Controlled
Shop By ManufacturerWilescoJensenMamodBohm Stirling EnginesTucher & WaltherKrick Model BoatsConley ModelsClassic MotorsHistoric SteamSteamCo EnginesHielscherMaier Butane Powered Model EnginesBlechspielzeugSchucoMarklinHit and Miss EngineMaxitrakMarkieWiggersGyroscopePM Research Steam EnginesMSS Steam ToysHOG Desktop Stirling EnginesCheddar Steam EnginesStuart ModelsGerman Steam CarouselMaxwell HemmensRailroad Technical Literature MemorabiliaLou Racioppo Private CollectionLiney Steam EnginesLow Temperature StirlingD.R. Mercer EnginesNochErector SetsEsbit and Oil

PM Research Parts

Online Catalogue | PM Research Steam Engines | PM Research Steam Engines |  PM Research Parts

Oak Buzz Coil

Oak Buzz Coil

Ref: PM-BUZZ-1


Price:$169.95

Quantity:


This high quality Buzz Coil provides a powerful spark. It will operate from a wide range of DC voltages. A small 9 Volt rechargeable battery pack is commonly used as a power source. It works just as well when a 12 Volt car battery is used as the power source. The box measures 4-1/2" x 2-3/4" x 3-1/4" tall and is constructed from Oak.

Authentic scale model Steam Whistle

Authentic scale model Steam Whistle

Ref: PMSW-4


Price:$39.95

Quantity:


Authentic scale model Steam Whistle with adjustable pitch. This beautiful little whistle has a nice crisp tone. It looks and works just like its full-size predecessor. Cast bronze valve and handle with brass pipe. Thread size 1/4-40, 2 3/4" high. Let her blow!

Click on picture for large view.


Wick - 1/8 in. x 3 ft.

Wick - 1/8 in. x 3 ft.

Ref: PMNO-83-2


Price:$5.75

Quantity:

Wick - 1/8" x 3 ft; (two items use this wick: Solar 1 with cap uses this wick as does the burner no-90-6 used in the fan. All other engines use the burner no-90-7 or no-90 which uses bigger wick no-83-3, 3/16.)

Drip Feed Oiler Threaded 1/4-40 inch 1 1/2 inch length.

Drip Feed Oiler Threaded 1/4-40 inch 1 1/2 inch length.

Ref: PMDFO-4


Price:$20.50

Quantity:


Drip Feed Oiler Threaded 1/4-40 inch 1 1/2 inch length.

Click on picture for large view.

Wick - 3/16 in. x 3 ft.

Wick - 3/16 in. x 3 ft.

Ref: PMNO-83-3


Price:$5.75

Quantity:

Wick - 3/16" x 3 ft

Dry Powdered Graphite

Dry Powdered Graphite

Ref: PMNO-95


Price:$6.00

Quantity:

Dry Powdered Graphite 6.5 gr. tube Recommended for lubricating power piston on solar engines.

Flywheel 2 3/8 in X 5/8 in

Flywheel 2 3/8 in X 5/8 in

Ref: PMFWC-3A


Price:$6.00

Quantity:


Model Globe Valve 1/4-40

Model Globe Valve 1/4-40

Ref: PMG4


Price:$26.95

Quantity:


Displacement Lubricators

Displacement Lubricators

Ref: PMLUB-1


Price:$24.95

Quantity:


Displacement Lubricator For cylinders from 1 inch bore

Displacement Lubricator For cylinders from 1 inch bore

Ref: PMLUB-2


Price:$22.95

Quantity:


1 Quart Cylinder Oil

1 Quart Cylinder Oil

Ref: PMCylinderoil


Price:$8.95

Quantity:

1 Quart Cylinder Oil

Alcohol Burner

Alcohol Burner

Ref: PMNO-90


Price:$18.50

Quantity:

Alcohol Burner for Solar 1, 3, 4, 13 & 15 If you would prefer to use denatured alcohol to run your "Thinking Man's Engine" this alcohol burner will provide you that option. Please specify the model you are going to run with the alcohol burner. (uses wick no-83-3).

SOLAR-1 Chimney

SOLAR-1 Chimney

Ref: PMNO-80


Price:$12.00

Quantity:

When this chimney is slipped into place, the efficiency of your Model #1 Engine will greatly improve. Problems created by troublesome drafts will be eliminated. A higher engine RPM will be obtained using less fuel. The chimney has a chrome plated body and nickel plated lid.

Belts 1/4' X .018' X 12'

Belts 1/4' X .018' X 12'

Ref: PMLSB-4


Price:$1.95

Quantity:


Belts 1/4' X .018' X 12'

Belts 1/2' X .018' X 12'

Belts 1/2' X .018' X 12'

Ref: PMLSB-8


Price:$3.85

Quantity:


Belts 1/2' X .018' X 12'

Line Shaft Hangar

Line Shaft Hangar

Ref: PMLSH-1


Price:$5.25

Quantity:


Line Shaft Hangar

Belt Pulley 1' Dia x 1/4' Wide

Belt Pulley 1' Dia x 1/4' Wide

Ref: PMLSP-100


Price:$2.30

Quantity:


Belt Pulley 1' Dia x 1/4' Wide

Belt Pulley 1 3/4' D X 5/8' W

Belt Pulley 1 3/4' D X 5/8' W

Ref: PMLSP-175


Price:$4.50

Quantity:


Belt Pulley 1 3/4' D X 5/8' W

Line Shaft, 3/16'

Line Shaft, 3/16'

Ref: PMRRS-3


Price:$1.00

Quantity:


Alcohol Burner

Glass Tube for Solar-7 or Solar-15

Glass Tube for Solar-7 or Solar-15

Ref: PMNO-91


Price:$7.00

Quantity:


Package of 1 oz. Silver solder and flux.

Package of 1 oz. Silver solder and flux.

Ref: PM136


Price:$10.00

Quantity:


Package of 1 oz. Silver solder and flux.

Globe Vale 3/16 inch straight

Globe Vale 3/16 inch straight

Ref: PMGV3


Price:$27.50

Quantity:


Nipple 3/16 inch by 1 1/2 inch tubing

Nipple 3/16 inch by 1 1/2 inch tubing

Ref: PMP3M-1.5


Price:$2.20

Quantity:


3/16 inch nipple 2 inch tubing

3/16 inch nipple 2 inch tubing

Ref: PMP3M-2.0


Price:$2.25

Quantity:


3/16 inch elbow

3/16 inch elbow

Ref: PMPL3M


Price:$2.30

Quantity:


3/16 inch T

3/16 inch T

Ref: PMPT3M


Price:$2.30

Quantity:


3/16 X 1 1/2 in. PIPE NIPPLE MTP

3/16 X 1 1/2 in. PIPE NIPPLE MTP

Ref: PM-P3MTP-1.5


Price:$2.20

Quantity:


Tapered Thread. High Speed Steel Ground Thread Tap. (Tap will cut MTP or UST tapered thread)

Tapered Thread. High Speed Steel Ground Thread Tap. (Tap will cut MTP or UST tapered thread)

Ref: PM-T-3/16-40MTP


Price:$27.50

Quantity:


Video in making the PM Research 2A

Video in making the PM Research 2A

Ref: PMVIDSTM02


Price:$23.95

Quantity:


Online Catalogue | PM Research Steam Engines | PM Research Steam Engines |  PM Research Parts

Main Pages

spacer
End of Content