Single Cylinder

Böhm combined the ideas of both inventors in the Stirling-Car A1. The thin brass cusps are reminiscent of the Prussian imperial age and of historical automobiles from around 1885.

Technical data:

DIMENSIONS 13 cm x 16 cm x 8,7 cm
WEIGHT 1.200 g
MATERIALS Stainless steel screws, stainless steel side frames, massive brass wheels with round rubber coating, aluminum bracket and radiator grill
DRIVING TIME 15-20 Min.
RPM 800-2000 Rev/min (depending on flame size and spacing)
GEARS/TRANSMISSION 3 gears (slow, middle, fast for table and floor), adjustable by reversing the belt
STEERING 360° revolvable

Bohm Striling engines are run on denatured alcohol(Canada, AKA Methyl HD Hydrate).

Click on picture for large view.

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.
Click on This Text for Operating Instructions

For the very first time, Böhm Stirling-Technik presents an individually driving car model with Stirling motor propulsion.

The Sportscar AS4 is a homage to a legendary example the first Mercedes vehicle. According to specialized literature, it was designed by Wilhelm Maybach as a racing car with 35HP engine at the time. The first model of the racing car was delivered to the client Emil Jellinek in Nice on December 22nd, 1900.

Böhm combined the ideas of both inventors in the Stirling-Car A4. The thin brass cusps are reminiscent of the Prussian imperial age and of historical automobiles from around 1885.

Technical data:

DIMENSIONS 13 cm x 16 cm x 8,7 cm
WEIGHT 1.200 g
MATERIALS Stainless steel screws, stainless steel side frames, massive brass wheels with round rubber coating, aluminum bracket and radiator grill
DRIVING TIME 15-20 Min.
RPM 800-2000 Rev/min (depending on flame size and spacing)
GEARS/TRANSMISSION 3 gears (slow, middle, fast for table and floor), adjustable by reversing the belt
STEERING 360° revolvable

Bohm Striling engines are run on denatured alcohol(Canada, AKA Methyl HD Hydrate).

Click on picture for large view.

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.
Click on This Text for Operating Instructions

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

The Bohm HB 7 is a beautiful example of a desktop model Stirling engine . It is constructed in the classic design of a Stirling engine, the horizontal model. This entry level Stirling engine is the easiest way to get acquainted with the Mini-Stirling family of motors.

This engine does not have a drive pulley to drive accessories.

Base plate : 6.3 in. x 4.9 in.
Height : 3.15 in.
Weight : 1.2 lbs.
Working rpm: approximately. 2,500 rpm
Drive: 1 spirit burner
Bearing application: 2 ball-bearings
Material of the engine: brass, aluminum, stainless steel
Working time: approximately. 30 min./1 spirit filling.

Bohm Striling engines are run on denatured alcohol(Canada, AKA Methyl HD Hydrate).

Click on picture for large view. Click Here to Watch Movie

Retail Price $349.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

A beautiful example of desktop Sterling model engine. A fascinating machine, which directs the energy flow upwards & produces a surprising amount of power.
Stirling hot air engine
Base measurements: 160 mm x 110 mm x 130 mm
Working rpm: approx. 2,000 min
Bearing application: 6 high-class ball-bearings
Material of the engine: brass, aluminum, stainless stell
Working time: 30-45 min

Click on picture for large view.

Click Here to Watch Movie

Retail Price $349.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

A beautiful example of desktop Sterling model engine. You'll be delighted with the butterfly-like motion of this wonderful motor.
Stirling hot air engine
Base measurements: 156 mm x 108 mm x 130 mm, 0,6 Kg
Working rpm: approx. 2,000 rpm
Bearing application: 6 high-class ball-bearings
Material of the engine: brass, aluminum, stainless steel
Working time: 30-45 min

Click on picture for large view.

Click Here to Watch Movie

Retail Price $349.98 On Sale Limited Time Offer!

NOTE: This Engine Available in DARK BASE only. NO ADDITIONAL CHARGE FOR DARK BASE WITH THIS ENGINE.

Enjoy watching this Boehm HB 11 Stirling with its overhead rocker arm and precision crankshaft.
Boehm Desktop Stirling Hot Air Engine
Base measurements: 158mm x 108mm x 120mm
Working rpm: 2000 rpm/min - 2500 rpm/min, to regulate speed increase wick length
Bearing application: 6 high-class ball-bearings
Material:
Screws, Side Parts: Stainless Steel
Cylinder: Brass
Remainder: Aluminum, Stainless Steel

Click on picture for large view.



Retail Price $349.95 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

You can almost feel the energy flowing through this quiet machine. Double rocker arm version with a precision crankshaft gets your heart beating.
Stirling hot air engine
Base measurements: 156 mm x 108 mm x 150 mm 0,8 kg
Working rpm: 2000 - 2500 rpm/min, to regulate as slowly run. Incl. drive-pulley for extern drives
Bearing application: 6 high-class ball-bearings
Material: screw, side parts total stainless steel
Cylinder brass
Rest aluminum, stainless steel.

Click Here to Watch Movie

Retail Price $325.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

Observe this machine's beautiful rocker arms.
Stirling hot air engine
Base measurements: 128 mm x 108 mm x 170 mm, 0,75 kg
Working rpm: 2000 rpm/min. (the engine has a aluminum good cooling Cylinder)
Bearing application: 6 high-class ball-bearings
Material: screw, side parts total stainless steel
Cylinder brass
Rest aluminum, stainless steel.

Click on picture for large view.

Retail Price $299.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

Stirling hot air engine
Base measurements: 156 mm x 108 mm x 130 mm, 0,65 Kg
Working rpm: 2000 - 2500 rpm/min, to regulate as slowly run
Bearing application: 4 high-class ball-bearings
Material: screw, side parts total stainless steel
Cylinder brass
Rest aluminum, stainless steel

Click on picture for large view.

Retail Price $299.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below. This engine does not have a drive pulley to drive accessories.

Base measurements: L. 157mm X B. 107 mm X H. 125 mm
Bearing application: 6 high-class ball-bearings
Working rpm: 2000 U/min.
Material: screw, side parts total stainless steel
Cylinder brass
Rest aluminium, stainless steel.

Click on picture for large view.

Retail Price $325.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

Retail Price $299.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

Retail Price $325.98 On Sale Limited Time Offer!

NOTE: Picture shown MAY NOT be representative of the wood base color. All pricing is for the LIGHT BEECH base. The Dark Wood base is available for an additional cost please make selection below.

Click on picture for large view.

The Beam Stirling developed by the manufacturer Lutz Hielscher is made of high-end materials like stainless steel, brass and glas. With the throttle valve the speed of the engine is fully adjustable. On slow speed the function of the model is better to understand.

Technical data:

Ready to run model, Painted
Lenght: 270 mm
Width: 95 mm
Height: 180 mm
Weight: 580 g
Stroke: 14 mm
Working cylinder Ø: 18 mm
Displacement cylinder Ø: 30 mm
Rpm: 0-850
Fuel: Spirit
Running time: Up to 60 minutes depending to the high of flame

Related Products:

One Box of Esbit Fuel (4 grams ea. tablet) $6.95 (4 or fewer items)$5.50 (5 to 9 items)$5.25 (10 to 19 items)$5.00 (20 to 35 items)$4.49 (36 or more items)

Shell Valvata J Oil 460 - Steam Cylinder Oil $4.75

This is a beautiful desktop Sterling model engine like found in HAMMACHER SCHLEMMER magazine. It runs on air and does not require water! It also runs on Alcohol and does not require the more expensive esbit tablets to run. This engine is 24 KT Gold plated and is absolutely beautiful to look at and watch run.
Size 2 1/5 in Wide X 5 1/2 in Long X 4 in High

Assembled Ready-To-Run.

Click on picture for large view.



Retail Price $299.98

On Sale Limited Time Offer!

This is a beautiful desktop Sterling model engine. It runs on air and does not require water! It also runs on Alcohol and does not require the more expensive esbit tablets to run. This engine is Finished in Aluminum and is absolutely beautiful to look at and watch run.
Size 2 1/5 in Wide X 5 1/2 in Long X 4 in High

Assembled Ready-To-Run.

Click on picture for large view.

This is a beautiful desktop Sterling model engine. It runs on air and does not require water! It also runs on Alcohol and does not require the more expensive esbit tablets to run. This engine is brushed aluminum and is absolutely beautiful to look at and watch run.
Size 2 1/5 in Wide X 5 1/2 in Long X 4 in High

Assembled Ready-To-Run.

Click on picture for large view.

This miniature Stirling Cycle Engine measures 7" x 4-1/4" and comes complete with built-in alcohol burner. Red flywheels and chassis mounted on a green base, these all-metal beauties silently running at speeds in excess of 1,000 RPM attract attention and create awe wherever displayed. This model comes completely assembled and ready to run, accompanied by our "Stirling Cycle Engines" book.

Click on picture for large view.

Click Here to Watch Movie

The Glassworks

See the pistons at work. Look inside the glass cylinders at the Stirling Cycle principle in action. This engine is extremely interesting to watch, is well built, and runs at speeds up to 1500 RPM. This is a hard combination to beat. Gyro-quality ball bearings, machined flywheel, sand cast frame which is painted royal blue, aluminum cooling fins and a hardwood platform are only a few of the outstanding features incorporated into this engine. To illustrate the versatility of a Stirling Engine, we provide a burner for denatured alcohol and a platform for solid fuel. A sample quantity of ESBIT dry fuel is supplied with the engine as well.

Special features include: replaceable and adjustable Pyrex hot cap, replaceable Pyrex power cylinder, dual fuel capability, and a solid hardwood platform. Specifications: 9" length x 4" height x 6" width. Completely assembled and ready to run.

Click on picture for large view.

Click Here to Watch Movie

The first "RIDER" engines were manufactured in 1880 by the De Lamater Iron Works. This engine was the inspiration for our "Peanut RIDER."

This all metal, black and brass engine with red flywheel is mounted on a solid hardwood platform. It is an excellent running engine and will make a handsome addition to your collection.

Each engine is test run at the factory and comes complete with an alcohol fuel cell, extra wick, allen wrenches, and Owner's Manual.

Specifications: Base is 5-1/4" x 5-1/4", 4" width x 9" height, 3/4" stroke, 3-1/2" flywheel.

Click on picture for large view.

Click Here to Watch Movie

1895 RIDER-ERICSSON HOT AIR PUMPING ENGINE

Now, you too can own the most sought after model hot air engine!

The Rider-Ericsson is the only hot air engine that was actually manufactured in production quantities. This marvelous engine is fascinating to see run, with all of its moving parts and a pump that really works! It is a must for all model hot air collections!

Our Hot Air Engine measures 4-1/2" x 5" x 6". The curved spokes of the flywheel, the cast linkages, bedplate, water jacket, and crankshaft bracket all contribute to the air of authenticity.

The original Ericsson engines were all water cooled. We are offering a water-cooled version complete with pump to circulate water through the engine. A free, 12-page leaflet containing interesting information on the original Ericsson engine is included with each model.

Each engine is tested at the factory and comes complete, ready to run, with an alcohol fuel burner, water tank, extra wick, allen wrenches and Owner's Manual.

Click on picture for large view.

Stirling Cycle Motor Driven Fan

With this impressing small finished model we retained our typical model engineering character.
The flying wheel is a cast iron part and not a CNC-lathed disk.
All brilliant parts are high-class gilded, i.e. they won't tarnish.
The parts will stay brilliant even after 20 years.

We also retained our WIGGERS-RED as the basic colour.

Heating cylinder and displacer consist of a heat-resistant glass of excellent quality. The wick of the burner is made of fibreglass. The operating piston and the bearings consist of self-lubricating material.
The model is mounted on an oiled wooden plate (70 x 160 mm) made of Abachi-wood. It is heated by normal spirit. The total height is 80 mm.

This item is carried as an in stock item. If the shopping cart allows you to order the item it will be shipped within two days.

Click on picture for large view.

This Stirling Engine is equipped with a bigger fly wheel, which is running between two machine pillars and ensures a good driving mechanism. Regarding the height of the model the heating oven with chimney is conspicuous. The heating oven better concentrates the heat around the heating cylinder; it is operated by a smaller flame and it produces a longer run. Optically the machine pillars and the heating oven, painted in WIGGERS red, give the machine a very appealing construction. All other parts are gilded, so that the model has a good appearance after years. The beech basic board is bright natural and protected with clear lacquer to contamination.

Of course the burner pot is gilded like all other parts, it has a fiberglass wick and the handle of the burner is turned beech.

Measurements of the model: length = 185 mm, width 90 mm, height 170 mm.

The model Stiwi 2 will also be delivered like model Stiwi 1 in a valuable wooden box.

Click on picture for large view.

This stirling model was developed by WIGGERS model engineering. It demonstrates a unique and fascinating movement of levers and rods. The model is not the most fuel efficient but it is optically fascinating and mesmerizing to watch run.

Click on picture for large view.

The movement of the heating and cooling cylinders are constructed in such a way that the whole mechanism is executed by the need for only one crank pin. The connection rods, levers and angles provides for a fascinating process of movement. The adjustment of the number of revolutions is possible through the control knob located on the side of the engine. The slower the model is run with its many side mechanisms, the more appealing is the process of its movement. The model generates a remarkable amount of power due to the big dimensioned fly wheel. This power can be used to run accessories with the pulley attached to the flywheel. The surface is painted and nickel plated to prevent tarnish and corrosion. The design is such that the model is free of maintenance and is heated by methyl spirits. The grooved beech wooden base board of the model centers a an acrylic hood, which gives the model protection. This model is medium sized and needs the following place: length: 280 mm, width: 170 mm, height with hood: 230 mm.

WIGGERS Stirling model engineering is glad to be able to present a model of a special design: the worldwide first Rider-Stirling machine.

It is the model of an original Rider Monski machine probably finished in licence before 1885 in Germany by Alexander Monski.

We succeeded to create a model whereby model engineers always failed. After nearly two years we primarily succeeded to set a perfect functioning model on foot – for pretentious Stirling model engineers a real technical dainty.

Technical information:
Ttotal height over chimney 400 mm, Width 170 mm, Length 190 mm,
Flying Wheel D-135 mm, Piston D -32 mm

Rider Ericsson: hot air pumping machine

The original machine was patented in America in 1888 and was formally, as well as today, a classic model among the STIRLING machines.

It was used on ranches to fill up animal watering troughs. Our model, a precise copy, in the measure of 1:4

All indicated dimensions are metrical dimensions!

Technical information:
Height 550 mm, Width 200 mm, Length 350 mm,
Flying Wheel D-235 mm, Piston D-50 mm,
RPM approx. 110
The model is heated by gas.

This German made Model A stirling engine is an elaborately designed engine. It is modeled after an engine made in early 1900's. The engine is constructed of a brass heat exchanger, stainless steel pistons and cylinders; the rest of the engine is made from iron castings. The flywheel is equipped with a pulley to run accessories. The engine is hand painted and has an alcohol burner that operates the model for 40-60 minutes.

Length 9 1/2 in X Width 5 in X Height11 1/2 in
Flywheel Diameter 6 1/2 in
Weight 6 1/2 lbs.



Click on picture for large view.

This engine is similar to stirling engines that were made in the early 1900's to power agricultural machines and water pumps. The engine is constructed of a brass heat exchanger, stainless steel pistons and cylinders; the rest of the engine is made from iron castings. The flywheel is equipped with a pulley to run accessories. The engine is hand painted and has an alcohol burner that operates the model for 40-60 minutes.

Length 11 1/2 in X Width 4 1/2 in X Height 8 1/4 in
Flywheel Diameter 5 1/2 in
Weight 6 lbs.

Click on picture for large view.

This engine is similar to stirling engines that were made in the early 1900's. The design was used in factories to run machines. The engine is constructed of a brass heat exchanger, stainless steel pistons and cylinders; the rest of the engine is made from iron castings. The flywheel is equipped with a pulley to run accessories. The engine is hand painted and has an alcohol burner that operates the model for 40-60 minutes.

Length 10 in X Width 5 1/4 in X Height 12 in
Flywheel Diameter 6 in
Weight 14 1/2 lbs.

Click on picture for large view.

This stirling engine is modeled after one made by W. Lehman of German in the early part of the 19th century.
The engine is constructed of a brass heat exchanger, stainless steel pistons and cylinders; the rest of the engine is made from iron castings. The flywheel is equipped with a pulley to run accessories. The engine is hand painted and has an alcohol burner that operates the model for 40-60 minutes.

Length 15 1/2 in X Width 6 1/4 in X Height 7 1/4 in
Flywheel Diameter 6 in
Weight 8 1/2 lbs.

Click on picture for large view.