We Ship World Wide - Choose an Alternate Currency
Online Catalogue | Hielscher | Stationary Steam Engines and Turbines
The smallest double sided acting Mini Beam Steam Engine with slide valve system. Made of fine metals like brass and copperTechnical data:Ready to run model, separateLenght: 50 mmWidth: 30 mmHeight:40 mmPiston: 7 mmStroke: 7 mmWeight: 40 gSteering: Slider steering, double sided actingRunning time: About 5 min with one water filling.Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.
The smallest double sided acting Mini Beam Steam Engine, developed from the manufacturer Lutz Hielscher. With condenser and made of fine precious metals like stainless steel, brass and aluminium.Technical datasReady to run ModelLenght: 106 mmWidth: 49 mmHeight: 73 mmPiston: 7 mmStroke: 7 mmSteering: slider steering, double sided actingWeight: 96 gRunning time: about 5 min with one water filling.Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.
The mini steam engine Cottage developed by Lutz Hielscher of Wuppertal is a highlight from the Worlds smallest Steam Engines series. The water in the glass boiler is brought to boil by means of a tea light and the steam pressure thus generated powers the oscillating mini steam engine causing the flywheel to rotate.A cottage is a little workshop. For example in the german area Bergisches Land have been located a lot of hammer and grinder cottages which were activated by water power. The water power has been replaced by small steam engines in 1800 to become independent of the water.Technical Data:Length: 85 mmWidth: 40 mmHeight: 64 mmWeight: 49 gBoiler: 5,0 ccmPiston: Ø 3,0 mmStroke: 8,0 mmSteering: oscillatingRunning time: 8-10 minFuel: candle/tee lightMaterial: stainless Steel, brass
WORLDS SMALLEST LIVE WORKING STEAM POWER PLANTLive steam engine power plant with working Dynamo and Light!Length 10.5 cmWidth 2.5 cmweight 7 cmBoiler (heat resistant glass) 10 cm3Piston (diametrical) 3 mmStroke 8 mmSteering OscillatingRunning time 6 min.Fuel solid fuelWeight 68 gr.Ready to runModel # HI-010080Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.
Technical Data:Ready to runLength: 11.0 cm Width: 11.0 cm Height: 26.0 cm Boiler: 25.0 ccm Piston Ø: 3 mm Stroke: 8 mm Steering: oscillating Running time: 30 min Fuel: spirit Weight: 66.0 g
Miniture Steam Engine Plant to run the miniture shop tools.Technical Data:Ready to runLength: 7 cm Width: 5.5 cm Height: 7 cm Boiler (heat resistant glass): 10 ccm Piston Ø: 3 mm Stroke: 8 mm Steering: oscillating Running time: 6 min Fuel: candle, e.g. tea-light Weight: 64 gDon't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.
Miniture Drilling accessory to go with the Hielscher mini steam engine.
Miniture Hack Saw accessory to go with the Hielscher mini steam engine.
Miniture Grinding Wheel accessory to go with the Hielscher mini steam engine.
Miniture Transmission accessory to go with the Hielscher mini steam engine.
Miniture Circular Saw accessory to go with the Hielscher mini steam engine.
WORLDS SMALLEST LIVE WORKING STEAM TURBIN ENGINEOur newly engineered high-powered Turbine 50 is made of non corrosive metals. The special turbine wheel has a diameter of 50 mm. The pilot valve has two 0.9 mm nozzles arranged opposing in a 30° angle. With this specially designed pilot valve this turbine is variable in speed: forward, backwards, slow, stop. The turbine blades are displaced in a 180° angle on the periphery of the turbine wheel and the steam or compressed air propels the turbine blades.Technical Data:Length: 80 mmWidth: 38 mmHeight: 75 mmWeight: 200 gRPM on the shaft drive1.0 bar: 280 RPM1.5 bar: 350 RPM2.0 bar: 400 RPM2.5 bar: 460 RPM1) Steam inlet2) Steam outlet3) Shaft drive4) Worm gear 1:255) Pilot valveClick on picture for large view.
This small but mighty steam engine, developed by Lutz Hielscher, is ideally suited for installation in steam ships and boats up to 70 cm in length driven by propellor or paddle wheel, or for installation in steam cars, steam locomotives, or as a stationary mini steam engine for impulsion of a variety of factory models. Propellor up to 40 mm.Category:Steam Engines / Mini SteamTechnical Data:Ready to runWidth: 3,7 cmHeight: 5.0 cmPiston: 7 mmStroke: 7 mmSteering effective from both sides2 cylinder oscillatingAlso controllable via servo: forwards-backwards-fast-slow-stopMay be installed either upright or horizontallyWeight: 40 gDrive shaft exit to right, left or both sidePerformance Details:bar | RPM on engine | RPM on 1st Shaft 1:3.3 / optional 2nd Shaft 1:11 0,5 1700 515 / 155 1,0 2400 727 / 218 1,5 2880 872 / 261 2,0 3100 939 / 281 Torque at transmission output 1 bar: 17.75 N/cm (shaft cannot be stopped by hand).Performance at 1 bar: 4.30 Watt Category:Steam Engines / Mini SteamTechnical Data:Ready to runWidth: 3,7 cmHeight: 5.0 cmPiston: 7 mmStroke: 7 mmSteering effective from both sides2 cylinder oscillatingAlso controllable via servo: forwards-backwards-fast-slow-stopMay be installed either upright or horizontallyWeight: 40 gDrive shaft exit to right, left or both side
The Mini Paddles that we have developed are suitable for the "Andreas" mini steam engine. The paddles can be installed to provide side gear drive or rear drive. A small model ship's steam engines will work especially well with these.Technical Data:Diameter: 46 mmWidth: 16 mmAxle diameter: 2.5 mmMaterial: stainless
Our mini boilers are soldered using brass and copper, and insulated with mahogany wood strips.Comes with a gas burner and refillable lighter-gas tank for producing steam.Technical Data:HorizontalHeight without chimney: 3.8 cmLength: 7.0 cmDiameter: 2.6 cmBoiler volume: 30 ccmRunning time: 20 minWeight: 116 g
Our mini boilers are soldered using brass and copper, and insulated with mahogany wood strips.Comes with a gas burner and refillable lighter-gas tank for producing steam.Technical Data:Upright Height without chimney: 5.0 cm Diameter: 3.5 cm Boiler volume: 30 ccm Running time: 20 min Weight: 110 g
Technical Data:Ready to runLength: 4.3 cmWidth: 2.5 cmHeight: 5.4 cmVolume: 17 ccmWeight: 22 g
This series of vacuum engines, also known as flame eaters or flame lickers, form a new range of products from our workshop. It is possible to regulate this model's running speed (rpm) by varying the distance of the flame from the engine. The Vacu Mini achieves rotational speeds of up to 900 rpm, its quality and performance is every outstanding.Technical Data:length: 150 mmwidth: 70 mmheight: 105 mmweight: 430 grunning time: approx. 30 minfuel: spiritpiston Ø: 18 mmstroke: 23 mmClick on picture for large view.
Traction Engine add-on kit for Vacu-MiniThe Vacu - Mini can be upgraded using an add-on kit. You can transform the Vacu Mini into a Traction Engine gauge I, G (45 mm).
The Vacu - Mini Traction Engine gauge I, G (45 mm) ready to run.Technical Data, Traction Engine:length: 210 mmwidth: 115 mmheight: 130 mmweight: 620 gClick on picture for large view.
The Beam Stirling developed by the manufacturer Lutz Hielscher is made of high-end materials like stainless steel, brass and glas. With the throttle valve the speed of the engine is fully adjustable. On slow speed the function of the model is better to understand.Technical data:Ready to run model, PaintedLenght: 270 mmWidth: 95 mmHeight: 180 mmWeight: 580 gStroke: 14 mmWorking cylinder Ø: 18 mmDisplacement cylinder Ø: 30 mmRpm: 0-850 Fuel: SpiritRunning time: Up to 60 minutes depending to the high of flame