Online Catalogue
Start of Content
Shop By ProductVideos of EnginesStationary Steam EnginesTraction Steam EnginesSteam Powered Fire TrucksSteam Cars, Vans, etc.Stirling EnginesTurbine EnginesFlame EaterSteam LayoutsKitsPartsSteam AccessoriesFuel, Oil & BeltsSale! Click Here!Museum Quality EnginesBoats - Marine EnginesInternal Combustion EnginesTrainsTin ToysBoilersCasting KitsBurners and BeltsBooks and VideosErector Eitech SetsAntiques and Collectible Steam Engines and AccessoriesHand Made Steam Model Boats RC Radio ControlledConley V8 Model Engines How They are MadeRailroad Memorabilia and Technical Literature
Shop By ManufacturerWilescoJensenMamodBohm Stirling EnginesMSM Marine EnginesAnton Marine EnginesMartin Marine EnginesRegner SteamMonahan Steam ModelsMicro EnginesTucher & WaltherKrick Model BoatsConley Models and Other V8 EnginesClassic MotorsHistoric SteamSteamCo EnginesHielscherMaier Butane Powered Model EnginesBlechspielzeugSchucoMarklinHit and Miss EngineMaxitrakWiggersPM Research Steam EnginesMSS Steam ToysHOG Desktop Stirling EnginesKarsten Steam EnginesCheddar Steam EnginesStuart ModelsGerman Steam CarouselMaxwell HemmensLou Racioppo Private CollectionLiney Steam EnginesLow Temperature StirlingD.R. Mercer EnginesNochErector SetsEsbit and Oil

Tractors

Online Catalogue | Traction Steam Engines |  Tractors

Wilesco D320 Steam Lorry
Wilesco D 320 Live Steam LoriWilesco D 320 Live Steam LoriWilesco D 320 Live Steam Lori

Wilesco D320 Steam Lorry

Ref: WI D 320


Price:$524.95

Quantity:


This nostalgic lorry with remote control is a scaled model of a lorry series which dates from 1915. At that time the transport of goods with such vehicles was more easygoing and had nothing to do with today’s just-in-time-deliveries. This historical platform lorry is equipped with a real functioning steam engine. The boiler and the double acting cylinder are placed in the driver’s cab. The roof of the cab can be removed to fill the upright boiler with water. The burner slide is located between the wheels of the front axle. The steering mechanism with remote control is placed on the bottom of the lorry. The wooden platform can be discharged manually.
The RC controls left and right movement. Forward and reverse is not possible.
Baseplate : 460 x 170 mm
Height : 230 mm
Weight :3.1 Kg
Special gift box: 490 x 200 x 260 mm

Click on picture for large view.

(No Fuel is Included with This Engine - Don't Forget the Esbit Fuel and the Steam Oil)

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.



Click on This Text for Assembly and Operating Instructions

People who bought this item also bought:

1. Wilesco A 325 Wagon for D 320 (Ref: WI A 325)
2. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
3. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)


Wilesco D405 Steam Traction Engine Blue
Wilesco Live Steam TractorWilesco Live Steam Tractor

Wilesco D405 Steam Traction Engine Blue

Ref: WI D 405


Price:$285.56

Quantity:


Wilesco D 405 mirror polished and nickel plated boiler, diameter 1.8 , length 7.3 mm, boiler capacity 14 in, with water gauge glass. Double action reversible brass cylinder, with flywheel, spring loaded safety valve, steam regulator, steam whistle, steam jet oiler and footbridge. Smoke stack, traditional steering wheel chain drive. Flywheel with a diameter of 3.2" with grooved pulley. Clutch engaged gear wheel, permitting the use of the machine as a stationary steam engine. Operating time about 15 minutes per fuel charge. Anodized aluminum wheels. Finely painted, matching colors. Available in Blue/White or Brass/Black. Length 11.8", width 5.9", Height 7.9, Weight: 3.7 lbs.

(No Fuel is Included with This Engine - Don't Forget the Esbit Fuel and the Steam Oil)

Retail Price $389.95

On Sale Limited Time Offer!



THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.

Click on This Text for Assembly and Operating Instructions

People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. Z360 RC Control to steer steam roller (Ref: WI Z 360)

Wilesco A 325 Wagon for D 320
Wilesco A 325 Wagon for D 320

Wilesco A 325 Wagon for D 320

Ref: WI A 325


Price:$133.83

Quantity:


The steam lorry D320 gets an useful "attachment". The platform trailer A325 doubles almost the total length of the complete set. Easily it moves through the fields.

Weight : 1,2 kg

Special gift box : 410 x 190 x 140 mm

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.


Click on This Text for Assembly and Operating Instructions

People who bought this item also bought:

1. Wilesco D320 Steam Lorry (Ref: WI D 320)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)

Wilesco D406 Steam Traction Engine Black-Brass
Wilesco Steam Tractor D 406Wilesco Steam Tractor D 406

Wilesco D406 Steam Traction Engine Black-Brass

Ref: WI D 406


Price:$312.33

Quantity:


Brass/Black D 406.

Click on picture for large view.

(No Fuel is Included with This Engine - Don't Forget the Esbit Fuel and the Steam Oil)

Retail Price $435.95

On Sale Limited Time Offer!



THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.



Click on This Text for Assembly and Operating Instructions

People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. Z360 RC Control to steer steam roller (Ref: WI Z 360)

Wilesco D496 Steam Traction Engine Black-Brass with RC control
Wilesco Steam Tractor D496Wilesco Steam Tractor D496Wilesco Steam Tractor D496

Wilesco D496 Steam Traction Engine Black-Brass with RC control

Ref: WI D 496


Price:$366.78

Quantity:


Brass/Black D 406 with radio control already installed.

Click on picture for large view.

(No Fuel is Included with This Engine - Don't Forget the Esbit Fuel and the Steam Oil)

Retail Price $495.95

On Sale Limited Time Offer!



THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.

Click on This Text for Assembly and Operating Instructions

People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. Rubber Tire (set of 4 pieces) Cross Profile for Wilesco Tractors (Ref: FTFST03)

Z431 Team of Horses for D 430
Z431 Team of Horses for D 430Z431 Team of Horses for D 430

Z431 Team of Horses for D 430

Ref: WI Z 431


Price:$43.69

Quantity:


Wilesco accessory Z 431for the Wilesco D430. This team of horses are complete with harness.

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.


Click on This Text for Assembly and Operating Instructions

People who bought this item also bought:

1. Wilesco D430 Steam Locomobile (Ref: WI D 430)
2. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
3. M87 Forest Workers (Ref: WI M 87)

Wilesco D430 Steam Locomobile
Wilesco D430 FrontWilesco D430 BackWilesco D430 Horses

Wilesco D430 Steam Locomobile

Ref: WI D 430


Price:$409.20

Quantity:


This Wilesco D 430 locomobile was used around the turn of the century by farmers for threshing and plowing. it was horse drawn but was also frequently self propelled and was capable of moving under its own steam at speeds of 1.5 to 2.5 miles per hour. This sophisticated steam model has a wealth of technical details and it looks good too in its livery of black combined with brass. Technical details: Brass boiler diameter 2.2", length 9.1". This engine has a partitioned smoke chamber at the front for the condensation and to allow the smoke to escape through the chimney, which is hinged in the middle. The sight glass acts as a water gauge. Reversible double action cylinder with two flywheels with a diameter of 3.2" which can be operated in forward and reverse. Exact indicating pressure gauge, spring loaded safety valve, whistle with chain, governor (just for show), steam regulator, steam jet oiler, water drain tap, black varnished boiler house with gangways and ladder. The Wilesco locomobile is driven by a chain and the front axle can be steered. Operating time approx. 15 minutes. The model is heated by dry spirit tablets. All parts are either painted or plated. Length 10.2", width 5.9", Height 8.3".
Weight: 4 lbs. 7oz.

Click on picture for large view.

(No Fuel is Included with This Engine - Don't Forget the Esbit Fuel and the Steam Oil)

Retail Price $525.95

On Sale Limited Time Offer!



THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.



Click on This Text for Assembly and Operating Instructions

People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. Z431 Team of Horses for D 430 (Ref: WI Z 431)

Steam Tractor Traction Engine

Steam Tractor Traction Engine

Ref: HI-010320


Price:$799.95

Quantity:


WORLDS SMALLEST LIVE WORKING STEAM ENGINE
This wonderful Live Steam Models scaled 1:43 are built e.g. like the Burell, Aveling & Porter or Fowler from 1910. The rolling power engines have been used in agriculture, road constructions, as road locomotives to pull heavy weights ore as driving engine until 1940.

Later on the powerful and easier to operate internal combustion engines substituted the steam engines.

Technical Data:
Length with tender Traction Engine: 7.87 inch, 200 mm, Road Roller: 8.27 inch, 210 mm
width Traction Engine: 1.97 inch, 50 mm, Road Roller: 2.36 inch, 60 mm
height Traction Engine: 3.15 inch 80 mm, Road Roller: 3.15 inch, 80 mm
weight with tender Traction Engine: 245 gr., Road Roller: 310 gr.
running time 20 min
motor 2 cylinder mini steam engine Andreas, steer able, self accelerating, double side effect
heating pure butane gas
lighting piezzo, only press button
material stainless materials, brass, German silver
Model # HI-010320
ready to run

Click on picture for large view.

People who bought this item also bought:

1. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
2. Live Steam Stanley Steamer (Ref: HI-010303)
3. Hielscher O Ring for Steam Engine Oiler 4 X 1.5 mm (Ref: HI-010009)


Steam Roller SR1A

Steam Roller SR1A

Ref: MA1312


Price:$219.95

Quantity:


A superbly realistic Mamod model of an early road roller.
Size: 11 1/4" x 5 7/8"x 7 1/4"
Weight: 3 lbs. 14oz.

Click on picture for large view.

Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.

Retail Price $299.95

On Sale Limited Time Offer!



THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.
Click on This Text for Operating Instructions

People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. Mamod Driving Band SR1, TE1A (Ref: MAE37)


Mamod SR1A with NEW slide valve engine

Mamod SR1A with NEW slide valve engine

Ref: MA1312SlideVl


Price:$349.95

Quantity:


Mamod Challenger Long Boiler Steam Roller with a new Piston Valve Engine

Click on picture for large view.

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.


Traction Engine TE1A

Traction Engine TE1A

Ref: MA1313Green


Price:$224.95

Quantity:


Attractive working Mamod model of a traditional English traction engine. Available in Green or Brass.
Size: 11 1/4" x 5 7/8"x 7 1/4". The TE1A has a reversing lever- 2 forward speeds and 2 reversing speeds.
Weight: 4 lbs.

Click on picture for large view.

Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.

Retail Price $289.95

On Sale Limited Time Offer!



THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.
Click on This Text for Operating Instructions

People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. Mamod Driving Band SR1, TE1A (Ref: MAE37)


Mamod TEA1 Green with NEW slide valve engine

Mamod TEA1 Green with NEW slide valve engine

Ref: MA1313GnSlideVl


Price:$349.95

Quantity:


Mamod Centurion Long Boiler Traction Engine LTE1V with a new Piston Valve Engine.

Click on picture for large view.

THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.

People who bought this item also bought:

1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Z80 Driving Belts 5 pack (Ref: WI Z 80)
3. Shell Valvata J Oil 460 - Steam Cylinder Oil 8 oz. (Ref: Shell 460-8-Large)


Brass Traction Engine TEAB

Brass Traction Engine TEAB

Ref: MA1313B


Price:$219.95

Quantity:


Attractive working model of a traditional English traction engine. Brass. Comes with a NEW COLOUR now - Brass Boiler and BLACK Wheels!
Size: 11 1/4" x 5 7/8"x 7 1/4"
Weight: 4 lbs.

Click on picture for large view.

Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.

Retail Price $299.95

On Sale Limited Time Offer!



THIS IS NOT A TOY! As it involves a flame it is not for use by anyone under the age of 14.
Click on This Text for Operating Instructions

People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Shell Valvata J Oil 460 - Steam Cylinder Oil (Ref: Shell 460)
3. Mamod Driving Band SR1, TE1A (Ref: MAE37)


Special Scenic Gas Fired Showman Engine Including Trailer Scale 1:10

Special Scenic Gas Fired Showman Engine Including Trailer Scale 1:10

Ref: MR-K01

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

2,800 British pounds For current exchange rates click here.


Special Scenic Gas Fired Showman Engine Including Trailer Scale 1:10
Select you Colors and pick the Name You want engraved on the front Brass Name Plate example - "Lady Madison", "Lord David"
(This item is Custom made to your specification (as to lettering and paint selection). Returns or deposits are non-refundable)
Personalize the Lettering on the Canopy.

Weight 35 lbs.
Length 26"

Crane stack with pulleys on rear tender, Front Dynamo double ended, exciter dynamo - on bracket, working unit.

This model is a copy of the largest Burrell Engine Built

Color Selections for Body and Wheels (you can mix and match) Black, Dark Blue, Cream, British Racing Green, Maroon, Red, Yellow

Boilers are Silver Soldered and Pressure Tested to 90 psi. A signed test certificate is issued.

Wheels- Extruded Dural Rims with steel hubs. Steel spokes are riveted to rims and silver soldered to hubs. Rubber tires are supplied or wheels have machined strakes depending on model.

Smoke box and Chimney - Machined of steel tube and fabricated with separate chimney designed to give maximum pull for the fire.

Gears - The gears are specially machined to conform to the scale and authenticity. The two steel crankshaft gears are operated by forks and levers with clamps and locating pins.

Lever control, pivoted at the Cab side with a spoked wheel, working brake drum

A hand pump is fitted for the water feed connected to the boiler base with a Check Valve and in-line globe valve, 5/16" dia ram. Tank Cover plates with hand rail.

Flywheel - Solid steel disk (5" Dia) with brass ring and center or spoked wheel and rubber belts, where necessary are supplied.

Crankshaft unit - Machined in one piece steel (5/16" diameter journal), with brass bearings, cams and con rod. Stephenson Link Valve Gear in Steel with Brass activating rods.

Engine- Cylinder Block, 5/8" Dia Bore X 1" Stroke, is machined from Naval Brass in one piece, the bore and ports jig milled in suit.

Valve chests are brass with end bearings
Slide valves are brass with adjustable buckles.

The is double acting
Piston is stainless steel with packed glands and rods. 5/8" Dia bore x 1" stroke.
Fine running valve in parallel with lever throttle.

Standard Fittings Whistle - Safety valve - lubricator (lever) - hand rails - brass lamps with lens - side plates - pressure gauge - glass water level - copper pipes throughout - brass rimmed edging - brass boiler bands - winding drum with cable - fine running valve.

Finish
A superb, durable and easily maintained enamel finish is achieved. Parts are grit blasted before powder coating at 222 C(400 F)

Cabs - The cab is in steel with brass edging, including handrail, steps and wire rope roller assembly, the scenic engines having a set of pulleys for the cable lift when fitted.

THIS SPECIAL ORDER ITEM IS HAND MADE PLEASE ALLOW 4 MONTHS FOR DELIVERY

Click on picture for large view.

Burrell Ploughing Engine

Burrell Ploughing Engine

Ref: MR-K02

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

2,800 British pounds For current exchange rates click here.


Burrell Ploughing Engine

Rear wheels 7" diameter, 16 spoke with machined strakes. Width over rear wheels 10"

Front wheels - 4 1/2 diameter, 12 spokes with machined treated

Front Axle 1/2" square steel
Rear Axle 1/2" Diameter steel
Tender - Steel fabricated with steps, fairlane roller system, horse and hose clips, water tank with pump.

Gears
16 gears, including two bevels for the vertical drive. Gear guard and twin speed, lever operated.

Flywheel - 5" diameter fabricated in steel with dished spokes.

Cable winding drum - operated from the crankshaft with bevel gears, including internal reduction gears at 10-1 reduction for cable winding and original Monkey Gear


THIS SPECIAL ORDER ITEM IS HAND MADE PLEASE ALLOW 4 MONTHS FOR DELIVERY

Click on picture for large view.

Crane Engine Gas Fired

Crane Engine Gas Fired

Ref: MR-K03

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

2,650 British pounds For current exchange rates click here.



Crane Engine Gas Fired

The front crane is fully operational from the cab and is generally known as a swan neck. The cable drum is driven by a worm and wheel and a pair of pinions on the inside of the flywheel.


THIS SPECIAL ORDER ITEM IS HAND MADE PLEASE ALLOW 4 MONTHS FOR DELIVERY

Click on picture for large view.

Burrell Road Roller Gas Fired

Burrell Road Roller Gas Fired

Ref: MR-K04

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

2,400 British pounds For current exchange rates click here.



Burrell Road Roller Gas Fired

THIS SPECIAL ORDER ITEM IS HAND MADE PLEASE ALLOW 4 MONTHS FOR DELIVERY

Click on picture for large view.

Burrell Road Locomotive Gas Fired

Burrell Road Locomotive Gas Fired

Ref: MR-K05

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

2,400 British pounds For current exchange rates click here.



Burrell Road Locomotive Gas Fired

Scale 1 1/8 = 1 foot
Height 14"
Width across hind wheels 10"
Length 20"
Weight 32 lbs.

Hind wheels 7" diameter x 1 7/8" wide machined strakes or rubber tires. Spokes riveted to rims

Front wheel 4 1/2" diameter X 1/2" wide. Spokes riveted to rims.
Boiler Jacket 3" diameter steel tube.

smoke box, front axle and fork - steel

Belly Tank 18g steel
Horn Plates 14g steel with boiler rivets
rear axle 1/2" diameter steel
Steering - Chain and 18 - 1 ratio worm and wheel
Canopy - Planked wooded canopy with supports. Fascia plates customized to your wording.


THIS SPECIAL ORDER ITEM IS HAND MADE PLEASE ALLOW 4 MONTHS FOR DELIVERY

Click on picture for large view.

Agricultural Engine

Agricultural Engine

Ref: MR-K06

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

2,400 British pounds For current exchange rates click here.



Agricultural Engine

THIS SPECIAL ORDER ITEM IS HAND MADE PLEASE ALLOW 4 MONTHS FOR DELIVERY

Click on picture for large view.

Plough to fit behind Agricultural Engine

Plough to fit behind Agricultural Engine

Ref: MR-K07

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

British pounds For current exchange rates click here.



Plough to fit behind Agricultural Engine

THIS SPECIAL ORDER ITEM IS HAND MADE PLEASE ALLOW 4 MONTHS FOR DELIVERY

Click on picture for large view.

3/4 Scale Road Locomotive

3/4 Scale Road Locomotive

Ref: MRK-08

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

895 British pounds For current exchange rates click here.



3/4 Scale Road Locomotive Little Gem
Specifications
Scale: ¾" to 1 foot
Height: 9½" (241mm)
Length: 17" (432mm)
Width: 7" (178mm)
Weight: 14lbs
Rear Wheels: 5" diameter
Front Wheels: 3" diameter (76mm)
Boiler Diameter: 1¾" (44mm)
Boiler Length: 7½" (190mm)
Running pressure: 20 to 40 psi
Fully built or kit to assemble. Price: £895.00p

LITTLE GEM Series 2 Specification for all engines

o Spirit Fired
o Cab: Steel and Dural Construction
o Smoke Box: Fabrication with Brass Chimney Top
o Door: Hinged with Markie name plate
o Front Axle and Fork: Steel
o Boiler: Copper with 5 Water Tubes and heavy gauge Back Plate all silver soldered with certificate.
o Cylinder: Machined from block
o Main Tube: Steel tube enclosing boiler
o Wheels: Hand built and riveted. Canopy and supports. Boards and rubber tyres.
o Cylinder: Double Acting 1/2" (12.5mm) diameter
o Crankshaft: Steel 3/4" (19mm) stroke Piston and Rod: Stainless Steel
o Slide Valve
o Forward/Reverse Slip Eccentric
o Lever Operated
o Displacement Lubricator
o Copper Tubing throughout
o Full Building Instructions fit Drawings
Complete with Pressure Gauge, Water Level Sight Glass, Steam Cock and Drain Screw. Ring Burner with drip feed Tender Tank (spirit fired). Steering by Worm and Wheel Chain. Lever Brake System. Single Speed Lever Control. Gear Driven.

THIS ITEM IS SPECIAL ORDER PLEASE ALLOW EIGHT WEEKS FOR DELIVERY

Click on picture for large view.

3/4 Scale Roller Engine

3/4 Scale Roller Engine

Ref: MR-K09

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

935 British pounds For current exchange rates click here.



3/4 Scale Roller Engine Little Gem
Specifications
Scale: ¾" to 1 foot
Height: 9½" (241mm)
Length: 17" (432mm)
Width: 7" (178mm)
Weight: 14lbs
Rear Wheels: 5" diameter
Front Wheels: 3" diameter (76mm)
Boiler Diameter: 1¾" (44mm)
Boiler Length: 7½" (190mm)
Running pressure: 20 to 40 psi
Fully built or kit to assemble. Price: £935.00p

LITTLE GEM Series 2 Specification for all engines

o Spirit Fired
o Cab: Steel and Dural Construction
o Smoke Box: Fabrication with Brass Chimney Top
o Door: Hinged with Markie name plate
o Front Axle and Fork: Steel
o Boiler: Copper with 5 Water Tubes and heavy gauge Back Plate all silver soldered with certificate.
o Cylinder: Machined from block
o Main Tube: Steel tube enclosing boiler
o Wheels: Hand built and riveted. Canopy and supports. Boards and rubber tyres.
o Cylinder: Double Acting 1/2" (12.5mm) diameter
o Crankshaft: Steel 3/4" (19mm) stroke Piston and Rod: Stainless Steel
o Slide Valve
o Forward/Reverse Slip Eccentric
o Lever Operated
o Displacement Lubricator
o Copper Tubing throughout
o Full Building Instructions fit Drawings
Complete with Pressure Gauge, Water Level Sight Glass, Steam Cock and Drain Screw. Ring Burner with drip feed Tender Tank (spirit fired). Steering by Worm and Wheel Chain. Lever Brake System. Single Speed Lever Control. Gear Driven.

THIS ITEM IS SPECIAL ORDER PLEASE ALLOW EIGHT WEEKS FOR DELIVERY

Click on picture for large view.

3/4 Scale Showmans Engine

3/4 Scale Showmans Engine

Ref: MR-K10

Quantity:


The pricing of this engine is in British Pound Sterling. Due to the exchange rate fluctuations and special pricing direct from Markie Manufacturing we are offering all our Markie engines in British Pound Sterling. Please download the PDF form and FAX it back to MiniSteam. We will send it to Markie in England and they will call you directly to discuss completion time and payment. This will allow substantial savings to you and as well you will be dealing directly with the manufacturer in choosing your paint colors and canopy wording.

1,350 British pounds For current exchange rates click here.



3/4 Scale Showmans Engine Little Gem
Specifications
Scale: ¾" to 1 foot
Height: 9½" (241mm)
Length: Showman's 18" (457mm)
Width: 7" (178mm)
Weight: 14lbs
Rear Wheels: 5" diameter
Front Wheels: 3" diameter (76mm)
Boiler Diameter: 1¾" (44mm)
Boiler Length: 7½" (190mm)
Running pressure: 20 to 40 psi
Fully built or kit to assemble. Price: £1,350

LITTLE GEM Series 2 Specification for all engines

o Spirit Fired
o Cab: Steel and Dural Construction
o Smoke Box: Fabrication with Brass Chimney Top
o Door: Hinged with Markie name plate
o Front Axle and Fork: Steel
o Boiler: Copper with 5 Water Tubes and heavy gauge Back Plate all silver soldered with certificate.
o Cylinder: Machined from block
o Main Tube: Steel tube enclosing boiler
o Wheels: Hand built and riveted. Canopy and supports. Boards and rubber tyres.
o Cylinder: Double Acting 1/2" (12.5mm) diameter
o Crankshaft: Steel 3/4" (19mm) stroke Piston and Rod: Stainless Steel
o Slide Valve
o Forward/Reverse Slip Eccentric
o Lever Operated
o Displacement Lubricator
o Copper Tubing throughout
o Full Building Instructions fit Drawings
Complete with Pressure Gauge, Water Level Sight Glass, Steam Cock and Drain Screw. Ring Burner with drip feed Tender Tank (spirit fired). Steering by Worm and Wheel Chain. Lever Brake System. Single Speed Lever Control. Gear Driven.

THIS ITEM IS SPECIAL ORDER PLEASE ALLOW EIGHT WEEKS FOR DELIVERY

Click on picture for large view.

Show First 5 Product(s)

Online Catalogue | Traction Steam Engines |  Tractors

Main Pages

spacer
End of Content