Wilesco Parts

Use this nickle plated fitting to run your Wilesco steam engine on compressed air and still use your whistle with safety valve protection. This fitting is for boilers that use the Pull Chain type whistle D 12, D15, D 16, D 18, D 20, D 22, D 24, T 90.

Fits all newer engines from 1990 on. This valve will NOT fit earlier engines. Does not come with whistle.

Click on picture for large view.

Use this brass fitting to run your Wilesco steam engine on compressed air and still use your whistle with safety valve protection. This fitting is for boilers that use the Pull Chain type whistle D 21.

Fits all newer engines from 1990 on. This valve will NOT fit earlier engines. Does not come with whistle.

Click on picture for large view.

Use this nickle plated fitting to run your Wilesco steam engine on compressed air and still use your whistle with safety valve protection. This fitting is for Smaller boilers that use the Dome type whistle D6, D10, D 106, D 14, D 455, D 456.

Fits all newer engines from 1990 on. This valve will NOT fit earlier engines. Does not come with whistle.

Click on picture for large view.

Use this valve to connect your aircompressor to your steam engine. You can regulate the flow of air to your engine using this valve. Note you also need Compressor Air Boiler adapter for your engine and rubber tubing. Aircompressor fitting I/M, 1/4.

Click on picture for large view.

Use this line to connect your aircompressor to you steam engine. (Buy it by the foot length)

Click on picture for large view.

Use this 500 ml bottle to fill the hard to get to boiler of your Wilesco traction engine.

Click on picture for large view.

Ceramic gas burner to fit Wilesco D10, D12, D14, D16 and D18. Does not include connecting pipe, gas tank or gas jet.

To make a full operational burner assembly with this burner you will need:
Dimensions: 1 15/16 L X 5/8 W X 7/8 H
Gas Jet Size 5
Refillable Gas Tank - Small or Standard
Gas tank holder - for Refillable Gas Tank Small Only
Gas tank connecting pipe (100mm, 275mm, 450mm)
Gas Refill Adapter - To fill Refillable Gas Tank with Butane Propane mix such as Primus camping fuel (cheaper than the butane cigarette lighter refill bottles). Note this adapter is not needed if a butane lighter refill bottle is used.

Click on picture for large view.

Click on This Text for Diagrams of Burners

Click on This Text for Instruction PDF File for BIX Burner

Ceramic gas burner to fit Wilesco D20, D21, D22 and D24. Does not include connecting pipe, gas tank or gas jet.

To make a full operational burner assembly with this burner you will need:
Gas Jet Size 8
Dimensions: 4.75 L X 5/8 W X 7/8 H
Refillable Gas Tank - Small or Standard
Gas tank holder - for Refillable Gas Tank Small Only
Gas tank connecting pipe (100mm, 275mm, 450mm)
Gas Refill Adapter - To fill Refillable Gas Tank with Butane Propane mix such as Primus camping fuel (cheaper than the butane cigarette lighter refill bottles). Note this adapter is not needed if a butane lighter refill bottle is used.

Click on picture for large view.

Click on This Text for Diagrams of Burners

Click on This Text for Instruction PDF File for BIX Burner

Brass shell, flanged brass end caps silver soldered.
Outlet M8 x 1 Male compression fitting for 4mm or 1/8 inch pipe.
Tested Pressure 375 lbs/sq in. permitting the use of a butane/propane mix with a maximum 30% propane.
Capacity 62 cc 34 grm
Size 78mm to top of valve, 50.8 mm diameter

Click on This Text for Instruction PDF File for BIX Gas Tank

3 9/16 in. L x 2 1/4 in. W (diameter) x 3 1/2 in. H
Capacity approx 127 cc / 69 grm
Click on picture for large view.

Click on This Text for Instruction PDF File for BIX Gas Tank

Jet No 5 : 55grm/hr (for butane/propane burners) consumption rate w/valve fully open (figures for guidance only as consumption can vary under different conditions); thread size 1BA, hole size .2 mm;

No. 8 gas jet for butane/propane burners; 69grm/hr (for butane/propane burners) consumption rate w/valve fully open (figures for guidance only as consumption can vary under different conditions);
Gas jet thread 1BA, hole size .25 mm

100 mm Gas Tank Connecting Pipe

275 mm Gas Tank Connecting Pipe

450 mm Gas Tank Connecting Pipe

Gas Refill Adaptor for Camping propane tanks. Buy the cheaper camping fuel and service the refillable butane/propane tanks. Use a 70/30 propane butane mix.

Wilesco Gas Tractor Unit Complete with control valve, pipework & gas tank.
(tank: 21 cc 11.5 grm; net wt 68 grm)
Convert your Wilesco Tractor to run on Butane instead of Esbit!

Must use the FTBIX 019 to refill this tank.

Click on picture for large view.

Click on This Text for Diagrams of Burners

Accessories pack for D6, D5

Contents: smoke stack, burner slide, whistle, funnel. (One-time usage amount of esbit is no longer included with accessory pkg.)

Accessories pack for D10, D101

Contents: smoke stack, burner slide, whistle, funnel. (One-time usage amount of esbit is no longer included with accessory pkg.)

Accessories pack for D12

Contents: smoke stack, burner slide, whistle, funnel. (One-time usage amount of esbit is no longer included with accessory pkg).

Accessories pack for D14

Contents: smoke stack, burner slide, whistle, funnel, condensed-water tray. (One-time usage amount of esbit is no longer included with accessory pkg.)

Accessories pack for D20

Contents: smoke stack, pressure gauge, condensed-water tray, funnel, whistle, burner tray. (One-time usage amount of esbit is no longer included with accessory pkg)

Accessories pack for D 18 and D22

Contents: burner slide, smoke stack, condensed-water tray, pressure gauge, funnel, whistle. (One-time usage amount of esbit is no longer included with accessory pkg.)

Accessories pack for D21

Contents: smoke stack, pressure gauge, condensed-water tray, funnel, whistle, burner tray. (One-time usage amount of esbit is no longer included with accessory pkg)

Burner tray for D8, D10, D101, D405, D55, D 52

Dome Whistle Nickel Plated 5mm Thread

Fits D6, D8, D10, D101, D14, D455

Dome Whistle Brass Plated 5mm Thread

Fits D106, D456

Steam Whistle with Chain, Thread 6mm.

Fits D12, D16, D161, D18, D20, D22, D24.

NOTE: For those of you that want to replace the whistle on the Wilesco D405 tractor or the D365 steam roller with this pull chain whistle it can be done using the 01529 adapter and this 01517 whistle. You may have to remove the fly wheel to install the whistle.

For the brass models you would want to use the brass whistle 01963 however we do not have a brass adapter at this time to match.

Steam whistle with chain, thread 6mm, brass.

Fits thread M6, brass. D21, D305, D430

Safety Valve Nickel plated M6 X 0.75

Fits all newer engines from 1990 on. This valve will NOT fit earlier engines.

Spring loaded safety valve. Filling-screw, fine-thread.

Fits fine-thread M6x0,75, brass for all models with brass boilers (from 1990)
Fits all newer engines from 1990 on. This valve will NOT fit earlier engines.

Pressure gauge 30mm with nickel-plated base, threaded bolt M6 for D18, D20, D

Plus adapter M6/M5 (511/1) for models up to 1989

Pressure gauge 30mm, M5 thread at the back - Brass fits D21

Pressure gauge socket, brass.

Brass fitting for D21 pressure gauge. 12X12mm inner thread M6X0, 75 top, M5 side.

Burner Tray D21

Smoke Stack for D10

Set of assoted washers for all Wilesco fittings .Washers M3-M6

Smoke Stack for D305, D456

Smoke Stack for D455

Screw for oiler, Brass D21

Large Screw for oiler, nickel D16, D 161, D18, D20, D24

Oiler filler cup, complete with screw on cap (not shown), Brass D15, D305, D416, D456, D406, D366, D376, D409, D456, D430, D106

Oiler filler cup, complete with screw on cap (not shown), nickel D10, D101, D14, D141, D22, D405, D455, D415, D365, D375, D48, D 52

Oiler Filler Cup Brass for the D305

Axle for D405

Water gauge glass, 27mm complete including gaskets Suitable for: D5, D6, D8, D10, D52, D101, D106, D365, D366, D367, D368, D375, D376, D377, D405, D406, D407, D409, D415, D416, D417, D430

Water gauge glass, Dia .37mm complete including gaskets for D12, D14, D15, D16, D18, D20, D21, D22, D24

Water Pump Complete for D21

Water gauge glass, 80x14x5mm complete kit. Including gaskets for D455, D456, D305

Centrifugal Governor for D10, D16, D20, D24

Flexible belts for centrifugal governor D21, D10, D20, D24

Condensed Water Tray. Red for side of engine. Older D20, D22, D24

Condensed Water Tray Black D10, D14, D141, D15, D16, D18, D20, D21, D22, D455, D456

Funnel, long 40 mm-tube

Plastic replacement valve for D405, D406, D365, D366, D368, D305, D415, D416, D375, D376, D395, D396, D398, D495, D496 Traction Engines, D455, D456 Stationary Engine steam supply valves and Whistle for all Tractors 01524.

Plastic replacement valve used for dome whistles 01522 and Water Carts A388, A385, A 386.

Plastic replacement valve used for Wilesco D409 and D499.

Steam Supply Valve/Water Drainage Cock without valve body case. Nickel D16, D18, D20

Valve body case for steam supply valve 01600. Nickel D16, D18, D20

Steam Supply Valve/Water Drainage Cock without valve body case. Brass D21

Valve body case for steam supply valve 01601. Brass D21

Piston with Rod D6

Slide Rod 6mm with Screw D16, D18, D20, D21, D24

Straps to secure the rear of the boiler to the fire housing.

Steam Supply Valve for the D416 Kit

Steam Supply Valve for the D409

Steam Supply Valve for the Nickel Plated Kits

Crank Disk with Bolt

Ex Center Plate

Brass base for Wilesco D 106

Cap

adaptor 01529 has a 5 mm thread to screw into the boiler of D5, D6, D8, D9, D10, D14, D105, D455, D456, all traction engines and steam rollers to connect 6mm accessories like the bigger whistle 01517 (nickel plated) or 01963(brass) or the pressure gauge 01528 to the boiler.

adapter 01533 has a 6 mm thread to screw into the boiler of D12, D15, D16, D18, D20, D21, D22, D24 and T90 to connect 5mm accessories like the small whistle 01522 (nickel plated) or 01950(brass).

Boiler w/safety valve incl. glass, polished brass for D305