Online Catalogue
Start of Content
Shop By ProductVideos of EnginesStationary Steam EnginesTraction Steam EnginesSteam Powered Fire TrucksSteam Cars, Vans, etc.Stirling EnginesTurbine EnginesFlame EaterSteam LayoutsKitsPartsSteam AccessoriesFuel, Oil & BeltsSale! Click Here!Museum Quality EnginesBoats - Marine EnginesInternal Combustion EnginesTrainsTin ToysBoilersCasting KitsBurners and BeltsBooks and VideosErector Eitech SetsAntiques and Collectible Steam Engines and AccessoriesHand Made Steam Model Boats RC Radio ControlledConley V8 Model Engines How They are MadeRailroad Memorabilia and Technical Literature
Shop By ManufacturerWilescoJensenMamodBohm Stirling EnginesMSM Marine EnginesTucher & WaltherKrick Model BoatsConley ModelsClassic MotorsHistoric SteamSteamCo EnginesHielscherMaier Butane Powered Model EnginesBlechspielzeugSchucoMarklinHit and Miss EngineMaxitrakMarkieWiggersGyroscopePM Research Steam EnginesMSS Steam ToysHOG Desktop Stirling EnginesKarsten Steam EnginesCheddar Steam EnginesGerman Steam CarouselMaxwell HemmensLou Racioppo Private CollectionLiney Steam EnginesLow Temperature StirlingD.R. Mercer EnginesNochErector SetsEsbit and Oil

Parts -Accessories / Misc. Parts:

Online Catalogue | Jensen | Jensen | Steam Engine Parts | Steam Engine Parts |  Parts -Accessories / Misc. Parts:

Jensen Steam Engine Air Compressor Adapter Unit

Jensen Steam Engine Air Compressor Adapter Unit

Ref: JNACU


Price:$34.95

Quantity:


Jensen Steam Engine Air Compressor Adapter Unit.
Use this fitting to run your Jensen steam engine on compressed air. Designed to allow the whistle to still be used.

Click on picture for large view.

Pressure Gauge adapter for Jensen Steam Engines.

Pressure Gauge adapter for Jensen Steam Engines.

Ref: JNPGA


Price:$34.95

Quantity:


Pressure Gauge adapter for Jensen Steam Engines. Use this fitting to fit a pressure gauge on your Jensen steam engine and still use the whistle. Designed to allow the whistle to still be used.

Must use the Wilesco 01938 pressure gauge with this unit.
Look under Wilesco Parts to order this gauge.

Click on picture for large view.

Pressure gauge 30mm, M5 thread at the back for D21

Pressure gauge 30mm, M5 thread at the back for D21

Ref: WI 01938

OUT OF STOCK


Price:$37.61


Pressure gauge 30mm, M5 thread at the back - Brass fits D21

Air Compressor Valve - 1/4 inch male connector
Air Compressor Valve - 1/4 inch male connectorAir Compressor Valve - 1/4 inch male connectorAir Compressor Valve - 1/4 inch male connector

Air Compressor Valve - 1/4 inch male connector

Ref: gtsc-aircomp-valve


Price:$19.50

Quantity:


Use this valve to connect your aircompressor to your steam engine. You can regulate the flow of air to your engine using this valve. Note you also need Compressor Air Boiler adapter for your engine and rubber tubing. Aircompressor fitting I/M, 1/4.

Click on picture for large view.

Rubber Tubing

Rubber Tubing

Ref: gtsc-air-line


Price:$0.45

Quantity:


Use this line to connect your aircompressor to you steam engine. (Buy it by the foot length)

Click on picture for large view.

500 ml Nalgene Wash Bottle

500 ml Nalgene Wash Bottle

Ref: gtsc-wash-bottle


Price:$9.95

Quantity:


Use this 500 ml bottle to fill the hard to get to boiler of your Wilesco traction engine.

Click on picture for large view.

Jensen Steam Whistle, machined brass / nickel plated, (all engines)

Jensen Steam Whistle, machined brass / nickel plated, (all engines)

Ref: JN002


Price:$13.47

Quantity:


Jensen Steam Whistle, machined brass / nickel plated, (all engines)
thread size 5/16 inch, 24 tap

Safety Valve, 25 psi. machined brass / nickel, Jensen

Safety Valve, 25 psi. machined brass / nickel, Jensen

Ref: JN003


Price:$13.47

Quantity:


Jensen Safety Valve, 25 psi. machined brass / nickel for all engines .
Thread size 5/16 inch, 24 tap

Jensen Hollow Steam Screw, machined brass / nickel

Jensen Hollow Steam Screw, machined brass / nickel

Ref: JN004


Price:$2.60

Quantity:


Jensen Hollow Steam Screw, machined brass / nickel for all engines.

Round Gauge Window,  (Glass with Gaskets)

Round Gauge Window, (Glass with Gaskets)

Ref: JN005


Price:$4.11

Quantity:


Round Gauge Window, (Glass with Gaskets)

Click on picture for large view.

Glass Tube Gauge with packing rings 2.5' boiler diameter.  For obsolete engines.

Glass Tube Gauge with packing rings 2.5' boiler diameter. For obsolete engines.

Ref: JN006a


Price:$4.11

Quantity:


Glass Tube Gauge with packing rings 2.5' boiler diameter. For obsolete engines.

Glass Tube Gauge with packing rings 3' boiler diameter.  For obsolete engines.

Glass Tube Gauge with packing rings 3' boiler diameter. For obsolete engines.

Ref: JN006b


Price:$4.75

Quantity:


Glass Tube Gauge with packing rings 3' boiler diameter. For obsolete engines.

Glass Tube Gauge Assembly, Complete 2.5' boiler diameter.  For obsolete engines.

Glass Tube Gauge Assembly, Complete 2.5' boiler diameter. For obsolete engines.

Ref: JN007a


Price:$31.15

Quantity:


Glass Tube Gauge Assembly, Complete 2.5' boiler diameter. For obsolete engines.

Glass Tube Gauge Assembly, Complete 3' boiler diameter.  For obsolete engines.

Glass Tube Gauge Assembly, Complete 3' boiler diameter. For obsolete engines.

Ref: JN007b


Price:$34.15

Quantity:


Glass Tube Gauge Assembly, Complete 3' boiler diameter. For obsolete engines.

Boiler Gasket Set round style gauge.

Boiler Gasket Set round style gauge.

Ref: JN008a


Price:$4.11

Quantity:


Boiler Gasket Set round style gauge.

Boiler Gasket Set tube style gauge.

Boiler Gasket Set tube style gauge.

Ref: JN008b


Price:$4.11

Quantity:


Boiler Gasket Set tube style gauge.

Click on picture for large view.

Jensen Drive Belts Springs 4.5 inch.

Jensen Drive Belts Springs 4.5 inch.

Ref: JN009a


Price:$3.07

Quantity:


Jensen Drive Belts Springs 4.5 inch.

Jensen Drive Belts Springs 9 inch.

Jensen Drive Belts Springs 9 inch.

Ref: JN009b


Price:$3.07

Quantity:


Jensen Drive Belts Springs 9 inch.

Jensen Smoke Stack  (brick embossed for late model engines)

Jensen Smoke Stack (brick embossed for late model engines)

Ref: JN010


Price:$10.35

Quantity:


Jensen Smoke Stack (brick embossed for late model engines) All engines.

Smoke Stack silver tube type for early model engines.

Smoke Stack silver tube type for early model engines.

Ref: JN011


Price:$9.31

Quantity:


Smoke Stack silver tube type for early model engines.

Jensen Fuel Tray for Models 60, 76 and 85 Engines.

Jensen Fuel Tray for Models 60, 76 and 85 Engines.

Ref: JN012a


Price:$3.12

Quantity:


Jensen Fuel Tray for Models 60, 76 and 85 Engines.

Jensen Fuel Tray Model 65 and 75 Engines.

Jensen Fuel Tray Model 65 and 75 Engines.

Ref: JN012b


Price:$3.12

Quantity:


Jensen Fuel Tray Model 65 and 75 Engines.

Funnel

Funnel

Ref: JN015


Price:$2.60

Quantity:


Funnel

Pressure Gauge with Brass Adapter.

Pressure Gauge with Brass Adapter.

Ref: JN016


Price:$31.18

Quantity:


Pressure Gauge with Brass Adapter. Fits ALL Jensen engines.

Click on picture for large view.

Boiler Straps, set of 2 pieces for 2 1/8' boilers.(Model 60,65,76and 85 Engines).

Boiler Straps, set of 2 pieces for 2 1/8' boilers.(Model 60,65,76and 85 Engines).

Ref: JN019a


Price:$3.12

Quantity:


Boiler Straps, set of 2 pieces for 2 1/8' boilers.(Model 60,65,76and 85 Engines).

Boiler Straps, set of 2 pieces for 2 1/2' boilers.(Model 75, 25, and 70 Engines).

Boiler Straps, set of 2 pieces for 2 1/2' boilers.(Model 75, 25, and 70 Engines).

Ref: JN019b


Price:$3.12

Quantity:


Boiler Straps, set of 2 pieces for 2 1/2' boilers.(Model 75, 25, and 70 Engines).

Boiler Straps, set of 2 pieces for 3' boilers.(Commercial Collector Model Engines).

Boiler Straps, set of 2 pieces for 3' boilers.(Commercial Collector Model Engines).

Ref: JN019c


Price:$3.50

Quantity:


Boiler Straps, set of 2 pieces for 3' boilers.(Commercial Collector Model Engines).

Boiler Strap Bolts 4 with nuts

Boiler Strap Bolts 4 with nuts

Ref: JN102


Price:$1.60

Quantity:


Boiler Strap Bolts, 4 with nuts.

Jensen Fiber Insulation for Burner Tray

Jensen Fiber Insulation for Burner Tray

Ref: JN085


Price:$2.60

Quantity:


Jensen Fiber Insulation for Electric Burner
6 X 5 1/4 inches

2 Piece Fuel Tray Holder for Model #75

2 Piece Fuel Tray Holder for Model #75

Ref: JN086


Price:$6.25

Quantity:


2 Piece Fuel Tray Holder for Model #75

Smoke Stack Support 2 1/8 in. boiler

Smoke Stack Support 2 1/8 in. boiler

Ref: JN088


Price:$10.35

Quantity:


Smoke Stack Support 2 1/8 in. boiler

Smoke Stack Support for model 75

Smoke Stack Support for model 75

Ref: JN089a


Price:$11.39

Quantity:


Smoke Stack Support 2 1/2 in. boiler. For Dry Fuel Jensen Model 75.

smoke stack support - model 25 electric

smoke stack support - model 25 electric

Ref: JN089b


Price:$11.39

Quantity:


Smoke Stack Support 2 1/2 in. boiler. For Electric Jensen Model 25 and 70.

Smoke Stack Support 3 in. boiler.

Smoke Stack Support 3 in. boiler.

Ref: JN090


Price:$12.43

Quantity:


Smoke Stack Support 3 in. boiler.

Hayco Cord Restraint

Hayco Cord Restraint

Ref: JN087


Price:$0.80

Quantity:


Hayco Cord Restraint

Round Window Ring Nut Only

Round Window Ring Nut Only

Ref: JN091


Price:$6.25

Quantity:


Round Window Ring Nut Only

Wrench only for Round Window Ring Nut

Wrench only for Round Window Ring Nut

Ref: JN092


Price:$1.05

Quantity:


Wrench only for Round Window Ring Nut

Red Handle

Red Handle

Ref: JN093


Price:$0.80

Quantity:


Red Handle

Pin for Red Handle

Pin for Red Handle

Ref: JN094


Price:$0.30

Quantity:


Pin for Red Handle

Reversing Lever & Spring

Reversing Lever & Spring

Ref: JN095


Price:$5.15

Quantity:


Reversing Lever & Spring

Reversing Lever Spring Only

Reversing Lever Spring Only

Ref: JN096


Price:$2.60

Quantity:


Reversing Lever Spring Only

Crank Pin Screw(attaches connecting rod) Model 25,75

Crank Pin Screw(attaches connecting rod) Model 25,75

Ref: JN097a


Price:$1.50

Quantity:


Crank Pin Screw(attaches connecting rod) Model 25,75

Crank Pin Screw(attaches connecting rod) Model 65

Crank Pin Screw(attaches connecting rod) Model 65

Ref: JN097b


Price:$1.50

Quantity:


Crank Pin Screw(attaches connecting rod) Model 65

Crank Pin Screw(attaches connecting rod) Model 70

Crank Pin Screw(attaches connecting rod) Model 70

Ref: JN097c


Price:$1.50

Quantity:


Crank Pin Screw(attaches connecting rod) Model 70

Eyelet Rivets for boiler straps

Eyelet Rivets for boiler straps

Ref: JN098a


Price:$0.20

Quantity:


Eyelet Rivets for boiler straps all engines, grounding strap electrical engines, side insulation support on firebox for electrical engines.

Large Rivets for mounting main engine base to metal base

Large Rivets for mounting main engine base to metal base

Ref: JN098b


Price:$0.20

Quantity:


Large Rivets for fastening firebox and smoke stack support to metal base on Jensen model 70, 75.

small rivet

small rivet

Ref: JN098c


Price:$0.20

Quantity:


Small Rivets for ID tags

Ladder for Model 25 or 75

Ladder for Model 25 or 75

Ref: JN099


Price:$5.15

Quantity:


Ladder for Model 25 or 75

Model 85 ID Plate

Model 85 ID Plate

Ref: JN100a


Price:$1.95

Quantity:


Model ID Plate for Jensen 85 steam engine.

Model 85G ID Plate

Model 85G ID Plate

Ref: JN100b


Price:$1.95

Quantity:


Model ID Plate for Jensen 76 steam engine.

Model 60 ID Plate

Model 60 ID Plate

Ref: JN100c


Price:$1.95

Quantity:


Model ID Plate for Jensen 60 steam engine.

Model 76 ID Plate

Model 76 ID Plate

Ref: JN100d


Price:$1.95

Quantity:


Model ID Plate for Jensen 65 steam engine.

Model 65 ID Plate

Model 65 ID Plate

Ref: JN100e


Price:$1.95

Quantity:


Model ID Plate for Jensen 70 steam engine.

Model 70 ID Plate

Model 70 ID Plate

Ref: JN100f


Price:$1.95

Quantity:


Model ID Plate for Jensen 75 steam engine.

Model 70G ID Plate

Model 70G ID Plate

Ref: JN100g


Price:$1.95

Quantity:


Model ID Plate for Jensen 25 steam engine.

Model 75 ID Plate

Model 75 ID Plate

Ref: JN100h


Price:$1.95

Quantity:


Model ID Plate for Jensen 25G steam engine.

Model 25 ID Plate

Model 25 ID Plate

Ref: JN100i


Price:$1.95

Quantity:


Model ID Plate for Jensen 70G steam engine.

Model 25G ID Plate

Model 25G ID Plate

Ref: JN100j


Price:$1.95

Quantity:


Model ID Plate for Jensen 20 steam engine.

Model 20 ID Plate

Model 20 ID Plate

Ref: JN100k


Price:$2.25

Quantity:


Model ID Plate for Jensen 20 G steam engine.

Model 20G ID Plate

Model 20G ID Plate

Ref: JN100l


Price:$2.25

Quantity:


Model ID Plate for Jensen 55 steam engine.

Model 55 ID Plate

Model 55 ID Plate

Ref: JN100m


Price:$2.25

Quantity:


Model ID Plate for Jensen 55G steam engine.

Screws for plywood bases

Screws for plywood bases

Ref: JN103


Price:$0.20

Quantity:


Screws for plywood bases

Generator Brush

Generator Brush

Ref: JN104


Price:$0.55

Quantity:


Generator Brush

Lamp Post with wire & nut

Lamp Post with wire & nut

Ref: JN105


Price:$15.55

Quantity:


Lamp Post with wire & nut

Generator Magnets 3 pieces with screws

Generator Magnets 3 pieces with screws

Ref: JN113


Price:$26.00

Quantity:


Generator Magnets 3 pieces with screws

Light Bulb for 15 E Generators.

Light Bulb for 15 E Generators.

Ref: JN018a


Price:$1.60

Quantity:


Light Bulb (352X) for 15 E Generators and 95G.

Light Bulb for 15/15bl Generators

Light Bulb for 15/15bl Generators

Ref: JN018b


Price:$1.60

Quantity:


Light Bulb for 15AC Generator, 20G, 25G, 55G and 70G (and old 15bl generators)

Pulley, 2 step 1 3/8' diameter.

Pulley, 2 step 1 3/8' diameter.

Ref: JN017


Price:$11.39

Quantity:


Pulley, 2 step 1 3/8' diameter.

Cylinder Tension Spring & Screw (oscillating)

Cylinder Tension Spring & Screw (oscillating)

Ref: JN107


Price:$2.60

Quantity:


Cylinder Tension Spring & Screw (oscillating)

Reversing Lever for model #55 twin cylinder

Reversing Lever for model #55 twin cylinder

Ref: JN108


Price:$8.25

Quantity:


Reversing Lever for model #55 twin cylinder

Pulley for model #15 E generator with set screw

Pulley for model #15 E generator with set screw

Ref: JN109


Price:$7.25

Quantity:


Pulley for model #15 E generator with set screw

Steam Chest 5-40 x 1/4 in Mounting Screw (one pair) for model 60, 76, 70

Steam Chest 5-40 x 1/4 in Mounting Screw (one pair) for model 60, 76, 70

Ref: JN110a


Price:$1.05

Quantity:


Steam Chest 5-40 x 1/4 in Mounting Screw (one pair) for model 60, 76, 70

Steam Chest 6/-32 x 1/4 in Mounting Screw (one pair) for model 65

Steam Chest 6/-32 x 1/4 in Mounting Screw (one pair) for model 65

Ref: JN110b


Price:$1.05

Quantity:


Steam Chest 6/-32 x 1/4 in Mounting Screw (one pair) for model 65

Cylinder Front Support Block for model #20

Cylinder Front Support Block for model #20

Ref: JN111


Price:$7.75

Quantity:


Cylinder Front Support Block for model #20

Cylinder Rear Support Block for model #20

Cylinder Rear Support Block for model #20

Ref: JN112


Price:$7.75

Quantity:


Cylinder Rear Support Block for model #20

Steam Cylinder attaching screws 6/32 x 3/4 set of two for models 25, 75 and 20

Steam Cylinder attaching screws 6/32 x 3/4 set of two for models 25, 75 and 20

Ref: JN114a


Price:$1.60

Quantity:


Steam Cylinder attaching screws 6/32 x 3/4 set of two for models 25, 75 or 20

Steam Cylinder attaching screws set of two for models 55.

Steam Cylinder attaching screws set of two for models 55.

Ref: JN114b


Price:$1.99

Quantity:


Steam Cylinder attaching screws 6/32 x 1 set of two for model 55

Steam Dome Brass for Model 75

Steam Dome Brass for Model 75

Ref: JNSteamDome


Price:$6.00

Quantity:


Steam Dome Brass for Model 75

Throttle with handle for Model 75

Throttle with handle for Model 75

Ref: JNThrottle


Price:$13.00

Quantity:


Throttle with handle for Model 75

Brass Beam Pipe Stock

Brass Beam Pipe Stock

Ref: JNBrassBeamPipe

OUT OF STOCK


Price:$0.84


Brass pipe stock.

Online Catalogue | Jensen | Jensen | Steam Engine Parts | Steam Engine Parts |  Parts -Accessories / Misc. Parts:

Main Pages

spacer
End of Content