We Ship World Wide - Choose an Alternate Currency
Online Catalogue | Boats - Marine Engines
Anton Crystal slide valve marine engine made in france. Optional waterpump and oiler included.Features: - Overall length: 90 mm - Width: 35 mm - Overall Height: 95 mm - Weight: 530 grams - Shaft: 4mm - Height of shaft: 11 mm - Distribution: drawers map - Inversion: slide Stephenson - Cylinder capacity: Available in 3.1cc and 4.5cc (4.55cc is special order) - Operating pressure: 1.5 to 3 bar The new CRYSTAL range, available in two displacements 3.1cc and 4.5cc The Stephenson reversing link requires generally two eccentric links. The difficulty with this system resides in the precise timing of the two eccentrics in relation to each other, and of course both relative to the piston position as well. We bypassed this problem by designing a double eccentric piece. This concept has two advantages: - The timing of the two eccentrics in relation to each other is no longer a problem since they are machined from the same mass and that calibration is performed by the machining of the work piece.An additional change is the traditional "tulip" or "legs", which often made it difficult to access gland piston rods, were replaced by cylindrical slides. This system has the advantage of easy access and possible adjustment of the gland; it also allows the slides to have a supply of oil for lubrication. To improve the alignment and stiffness of the crankshaft (for this engine, it is in sections), the base engine was designed with 5-piece bearings. This concept allows a highly accurate alignment of holes for the passage of the elements of the crankshaft. The crankshaft mounting is thus done in the base; therefore it becomes a "reference line" for alignment of the entire assembly. The two additional levels limit the overhang of the tree, especially the flywheel side.Click on this link for a 3 dimensional picture.
Anton Crystal Optional Water PumpThis is the water pump to fit the Anton crystal engine onlyClick on this link for a 3 dimensional picture of the Anton Crystal with water pump.
Anton Jade slide valve marine engine made in france. Optional waterpump and oiler included.JADE engine is the latest engines designed by ANTÓN workshops. This motor is a cylindrical, rotatable with inverter operation. This enables forward / reverse, brake and idle with a single servo control radio. This principle allows a great flexibility of use, combined with high reliability (fewer moving parts, fewer axes of rotation)Available in two displacements: - 3.1 cc, for boats from 11 to 17 lbs, a propeller with a diameter of 50-65 mm - 4.5 cc for boats 17 to 30 lbs, a propeller with a diameter of 60-75 mmFeatures: - Overall length: 88 mm - Width: 48 mm - Overall Height: 90 mm - Weight: 540 grams - Shaft: 4 mm - Height of shaft: 14 mm - Distribution: spools - Inversion: rotary inverter - Operating pressure: 1.5 to 3 barClick on this link for a 3 dimensional picture.
ATTENTION: A VERY SMALL NUMBER OF THESE ENGINES HAVE SURFACED. ONE STEAMPLANT IS LEFT. THESE ENGINES ARE NO LONGER IN PRODUCTION. THEY ARE NEW IN THE BOX AND WARANTEED FOR 1 YEAR.Full steam plant with boiler ready to run with serial number.The Sparrow Horizontal Steam Plant consists of our Cambria Horizontal Steam Boiler, Sparrow Twin Cylinder Steam Engine, oil/water separator tank, and all necessary fittings, all mounted on a stainless steel base. Each complete ready to run steam plant features all copper plumbing installed and factory welded. Click on picture for large view.
Ref: WI D 70
Do you dream of a journey on a romantic steam ship? The Wilesco African Queen is then exactly the right boat for you. The engine is steaming smoothly and the chimney smokes. This model is assembled completely and ready to use. If you want to steer the boat by a RC system everything is prepared for mounting it afterwards.Do not wait to long to be a captain because the African Queen is a limited edition of 1,000 in the Wilesco range. The original steamboat African Queen was built 1910. It became worldwide famous as the main role in the film African Queen beside the actors Katharine Hepburn and Humphrey Bogart. In this film the African Queen gets torpedoed on the Lake Victoria by the German warship Konigin Luise in the course of World War I. Like the original boat, this finished model has a wooden hull and runs with a steam engine.Technical specifications: Length: 70 cm, Width: 20 cm, Total height: 40 cm, Scale: 1:12, Weight: 2 kg, Boiler capacity: 120 cm³ The pictured figurine is not included in the packing.Complete steamboat African Queen with wooden hull and fully operational steam engine.Don't forget the Esbit Fuel and the Steam Oil! See Bottom of Page.Click on picture for large view.Retail Price $849.95
On Sale Limited Time Offer!