Online Catalogue
Start of Content
Shop By ProductVideos of EnginesStationary Steam EnginesTraction Steam EnginesSteam Powered Fire TrucksSteam Cars, Vans, etc.Stirling EnginesTurbine EnginesFlame EatersSteam LayoutsKitsPartsSteam AccessoriesFuel, Oil & BeltsSale! Click Here!Museum Quality EnginesBoats - Marine EnginesInternal Combustion EnginesTrainsTin ToysBoilersCasting KitsBurners and BeltsBooks and VideosErector Eitech SetsAntiques and Collectible Steam Engines and AccessoriesHand Made Steam Model Boats RC Radio ControlledConley V8 Model Engines How They are MadeRailroad Memorabilia and Technical Literature
Shop By ManufacturerWilescoJensenMamodBohm Stirling EnginesMSM Marine EnginesAnton Marine EnginesMartin Marine EnginesRegner SteamMonahan Steam ModelsMicro EnginesTucher & WaltherKrick Model BoatsConley Models and Other V8 EnginesClassic MotorsHistoric SteamSteamCo EnginesHielscherMaier Butane Powered Model EnginesBlechspielzeugSchucoMarklinHit and Miss EngineMaxitrakWiggersPM Research Steam EnginesMSS Steam ToysHOG Desktop Stirling EnginesKarsten Steam EnginesCheddar Steam EnginesStuart ModelsGerman Steam CarouselMaxwell HemmensLou Racioppo Private CollectionLiney Steam EnginesLow Temperature StirlingD.R. Mercer EnginesNochErector SetsEsbit and Oil

Museum Quality Engines

Online Catalogue |  Museum Quality Engines

Page:  1  2  3  4  5  ...   >   >>   View All (35)
Reeves American 4-4-0 Washington Machined Ready to Run 4 3/4

Reeves American 4-4-0 Washington Machined Ready to Run 4 3/4" Track

Ref: Reeves-Washington


Price:$24,995.00

Quantity:


Scale 4-4-0 American Live Steam Train

For fifty years, the American, or Eight-wheeler, enjoyed widespread popularity as the predominant locomotive on the North American continent. The swivel four-wheel lead truck made the 4-4-0 well-suited to the steep grades, tight curvature and primative roadbed of railroads in the mid-nineteenth century. By 1900, construction of new 4-4-0s had almost ceased, but not before a grand total of more than 25,000 had been built by manufacturers such as Rogers, Baldwin, Cooke and Mason.

Our miniature steam powered American is a very authentic scale model and a fine performer. Several hundred of these engines have been built over the years and a visit to any of the live steam tracks in North America or Europe will usually find one of these beautiful locomotives in operation as the center of attention. All of the detail items are either bronze or brass. .

Specifications
4-4-0 Rogers American Loco
• A super detailed model design from Reeves Technical Department by D Piddington for both 5" and 4 3/4" gauges
• From original 1872 drawings
• Described in Model Engineer Vol. 166
• Length: 57.25"
• Boiler Dia: Taper
• Cylinder Bore: 1.375"
• Driving Wheel dia: 6"


Holt

Holt "75" Caterpillar Gas Engine Machined Ready to Run

Ref: Coles-Holt


Price:$7,995.00

Quantity:


Width: 5" Height:9" Length: 12" Weight: 15 LBS

Bore: 1" Stroke: 1-1/4" HP: Approx 1 Overhead Valve Gear

4 Cylinder, 4 Cycle, Water Cooled

Canfield Hit and Miss Gas Engine Machined Ready to Run
Canfield Hit and Miss EngineCanfield Hit and Miss EngineCanfield Hit and Miss EngineCanfield Hit and Miss Engine
Canfield Hit and Miss EngineCanfield Hit and Miss EngineCanfield Hit and Miss EngineCanfield Hit and Miss Engine

Canfield Hit and Miss Gas Engine Machined Ready to Run

Ref: Cox-Canfield


Price:$3,500.00

Quantity:


Canfield Model Hit and Miss Engine. This engine is from Debolt Machine Inc. Bore is 1.25 with a Stroke of 2.00.

Canfield engines were introduced in New York around 1903. Our 1/3" Scale model has 7 13/16" diameter flywheels and 1 1/4" bore. It has a hit and miss governor that is activated by brass fly-balls at the end of the side shaft. It has the water tank mounted directly on top of the cylinder. Fuel utilized is gasoline, with a spark plug ignition system. It is a lightweight model engine, when finished weighs about 25 lbs.

Click on picture for large view.

Hemmens York Mill Engine Plant

Hemmens York Mill Engine Plant

Ref: MHYorkEngine


Price:$2,449.95

Quantity:


Classic Maxwell York Mill Engine Plant with working water pump Gas Fired.

MAXWELL HEMMENS LIVE STEAM MODEL MARINE ENGINE
14 x 24 x 10-1/2 inches (35.6 x 61.0 x 26.7 cm)
Finely built Maxwell Hemmens boiler system combined with a Max York Mill compound engine with water pump.

Click on picture for large view.

Live Steam La France Double Pump Fire Engine

Live Steam La France Double Pump Fire Engine

Ref: CLLaFrance-2

OUT OF STOCK


Price:$24,999.00


Hand Machined Coles Power Model La France Double Pump Fire Engine. Over 1,800 hours of machining went into making this model. Gold Plated parts will not tarnish. Purchased from a Museum!

American La France Fire Engine
Bore: 1-1/8"
Stroke: 1-1/4"
Pump Bore: 3/4"
Length: 25"
Width" 10"
Height: 18"

Two cylinder, double acting engine and pump.

The engine has NOT been fired. It is in mint condition.

Click on picture for large view.

Page:  1  2  3  4  5  ...   >   >>   View All (35)

Online Catalogue |  Museum Quality Engines

Main Pages

spacer
End of Content