Online Catalogue
Start of Content
Shop By ProductVideos of EnginesStationary Steam EnginesTraction Steam EnginesSteam Powered Fire TrucksSteam Cars, Vans, etc.Stirling EnginesTurbine EnginesFlame EatersSteam LayoutsKitsPartsSteam AccessoriesFuel, Oil & BeltsSale! Click Here!Museum Quality EnginesBoats - Marine EnginesInternal Combustion EnginesTrainsTin ToysBoilersCasting KitsBurners and BeltsBooks and VideosErector Eitech SetsAntiques and Collectible Steam Engines and AccessoriesHand Made Steam Model Boats RC Radio ControlledConley V8 Model Engines How They are MadeRailroad Memorabilia and Technical Literature
Shop By ManufacturerWilescoJensenMamodBohm Stirling EnginesMSM Marine EnginesAnton Marine EnginesMartin Marine EnginesRegner SteamMonahan Steam ModelsMicro EnginesTucher & WaltherKrick Model BoatsConley Models and Other V8 EnginesClassic MotorsHistoric SteamSteamCo EnginesHielscherMaier Butane Powered Model EnginesBlechspielzeugSchucoMarklinHit and Miss EngineMaxitrakWiggersPM Research Steam EnginesMSS Steam ToysHOG Desktop Stirling EnginesKarsten Steam EnginesCheddar Steam EnginesStuart ModelsGerman Steam CarouselMaxwell HemmensLou Racioppo Private CollectionLiney Steam EnginesLow Temperature StirlingD.R. Mercer EnginesNochErector SetsEsbit and Oil

PM Research Steam Engine Accessories

Online Catalogue | PM Research Steam Engines |  PM Research Steam Engine Accessories

Page:  1  2   >   >>   View All (9)
Machined Dynamo 12 Volts.
CATALOG SUSPENDED

Machined Dynamo 12 Volts.

Ref: PMDYN-COMP


Price:$108.88


Grooved Pulley for Dynamo - Additional $7.95

This item (as shown) includes an OPTIONAL grooving for the Wilesco belts and rubber cord belts sold on this site. This option for the grooving is $7.95.

You can belt this dynamo to any of our steam engines and produce power for your miniature factories or light your small villages. This is reminiscent of a vintage open frame dynamo used for lighting in early factories.

This Dynamo comes completed sporting cast iron construction. The frame has mounting ears and two aluminum end caps to contain the magnet, armature and brushes. You can paint this to suit your requirements.

SPECIFICATIONS:

Speed: 5300 rpm

Voltage: 10 VDC @ 10 watts

Voltage no load: 12 VDC

Max. Current: 2.4 Amps

Dimensions: 2-3/8"W x 3-1/2"L x 2-1/4"H

Click on picture for large view.

Retail Price $269.98

On Sale Limited Time Offer!



People who bought this item also bought:
1. One Box of Esbit Fuel (4 grams ea. tablet) (Ref: Esbit 1 Pack)
2. Z80 Driving Belts 5 pack (Ref: WI Z 80)
3. Rubber Belt 2.4 mm (Ref: RBcord2.4mm)

1890's Drill Press [Aluminum Kit]
CATALOG SUSPENDED

1890's Drill Press [Aluminum Kit]

Ref: PMDP-1


Price:$91.14


ACTUAL WORKING MODEL
1890'S DRILL PRESS

Picture this in your mind! A display representing an 1895 machine shop with wooden beam construction. At one end of the engine room complete with one of our #5 engines and our #BLR-1 or #BLR-2 boilers. Then the rest of the 1895 machine shop with our beautiful little DP-1 drill press working away alongside our awesome EL-1 model lathe. What a sight! But wait, there's more! Much more to come. Build your machine shop with expansion in mind; because we plan to expand this machine tool line.

Now picture this! You making chips with your own machine shop! You are the proprietor! You are the operator! In fact, you'd better wear suspenders 'cause you may just pop your buttons when you swell up with pride as you watch the beholder's eyes sparkle with pure delight.

That's right! You can actually drill holes with this baby! This little darling was scaled down to 1/12 scale from the J. E. Snyder Company 21" upright drill press as found in illustration #450 on page 116 of the "Charles A. Strelinger Company" catalog of 1895. You can purchase one of these 1895 catalogs from our BOOK PAGE, (STOCK #20692). The drill press measures 6-1/2" high.
Kit, complete with 13 easy machining aluminum castings, all required hardware, material, bar stock, precut gear stock, finished bevel gears and complete working drawings.

This is a CASTING KIT that requires machining.!


People who bought this item also bought:

1. Working Model Stationary Steam Mill KIT (Ref: PM3BIM)
2. Belts 1/4' X .018' X 12' (Ref: PMLSB-4)
3. Z80 Driving Belts 5 pack (Ref: WI Z 80)

1890's Engine Lathe [Aluminum Kit]
CATALOG SUSPENDED

1890's Engine Lathe [Aluminum Kit]

Ref: PMEL-1


Price:$155.82


ACTUAL WORKING MODEL

You read that right! This little beauty actually performs work like its full size counterpart!
This lathe is a 1/12 scale replica, similar to figure 806 of the "Charles A. Strelinger Company" 16-inch lathe found on page 212 of their 1895 catalog. You can order a copy of this catalog, STOCK #20692, from our BOOK PAGE. The lathe measures 6-1/2" in length and 4-1/2" in height.
Just think of it! An actual working lathe that you have built! Your friends will be awestruck! Your wife will be glad to have you out of her hair for a few hours! And all the children who see it will be delighted!
Kit, complete with 19 easy machining aluminum castings, all required hardware, material, bar stock, gear stock, and complete working drawings. Kit includes cone pulley for jack shaft and chuck material.

Team this lathe up with our DP-1 drill press and our line shaft accessories and you will have the beginning of your own model machine shop.

This is a CASTING KIT that requires machining!

Click on picture for large view of castings.

People who bought this item also bought:

1. Wick - 1/8 (Ref: PMNO-83-2)
2. Package of 1 oz. Silver solder and flux. (Ref: PM136)
3. PM Research 2A Oscillating Steam Engine-Aluminum Machined Kit (Ref: PM2AM)

1890's Engine Lathe Working Model
1890's Engine Lathe Working Model1890's Engine Lathe Working Model1890's Engine Lathe Working Model1890's Engine Lathe Working Model
1890's Engine Lathe Working Model
CATALOG SUSPENDED

1890's Engine Lathe Working Model

Ref: PMEL-1-Comp


Price:$1,595.95


ACTUAL WORKING MODEL COMPLETLY MACHINED!

You read that right! Completely Machined. These items are very rare to find in the finished format. This little beauty actually performs work like its full size counterpart!

This lathe is a 1/12 scale replica, similar to figure 806 of the "Charles A. Strelinger Company" 16-inch lathe found on page 212 of their 1895 catalog. The lathe measures 6-1/2" in length and 4-1/2" in height.

Just think of it, an actual working lathe your friends will be awestruck!

This is a CASTING KIT that requires machining!

Click on picture for large view of castings.

Bench Grinder [Aluminum Kit]
CATALOG SUSPENDED

Bench Grinder [Aluminum Kit]

Ref: PMBG-1


Price:$35.28


ACTUAL WORKING MODEL
Would any machine shop be complete without a bench grinder? We didn't think so! We told you to build your machine shop with expansion in mind. This little bench grinder will go perfectly with our other machine tools.

The bench grinder is a 1/12 scale replica of the Challenge Emery Grinder found on page 252 of the "Charles A. Strelinger Company" catalog of 1895. A copy of this catalog can be ordered through our BOOK PAGE, (STOCK #20692). The bench grinder and stand measure 4" high, 1-7/8" wide, and 1-1/2" deep.

Be Cautioned: If you keep expanding your work shop, your friends and family may not see much of you again! Many more kits are coming!

Kit, complete with 4 easy machining aluminum castings, all required hardware, material, bar stock, and complete working drawings.

This is a CASTING KIT that requires machining!


People who bought this item also bought:

1. M66 Dynamo (Ref: WI M 66)
2. M64 Plate Shears (Ref: WI M 64)
3. Funnel, long 40 mm-tube (Ref: WI 01850)

Page:  1  2   >   >>   View All (9)

Online Catalogue | PM Research Steam Engines |  PM Research Steam Engine Accessories

Main Pages

spacer
End of Content